I have just upgraded to v2.6.2 - K6 inks... I am using an Epson 1280. I have run the script (Install1280.command - said it was successful) and have the printer...
7644
jerry dungan
jerry_4y
Mar 2, 2009 3:47 am
Steve, Try to rerun both the 'InstallScripts" command from the 'Profiles' folder, andthe Install-1280 K6.command inside of the 890-1280-1290-K6 folder if you...
7645
mdabrosca
Mar 2, 2009 11:52 am
Hi Frank: I have tested quite a few papers lately and I must say that Harman Gloss (warmtone or bright) on my 3800 with Ultrachrome inks is producing some...
7646
enggass
Mar 2, 2009 2:25 pm
Thanks! I had figured it out. I was running the script from the wrong location. Once I moved it - then ran it, my profiles showed up as expected. Thanks, Steve...
7647
natcarish
Mar 2, 2009 3:17 pm
This may be off topic, but... I print both black & white and colour prints, but whenever I print a colour document after running QTR the colour comes out...
7648
natcarish
Mar 2, 2009 3:19 pm
Using Mac 10.5.6, QTR 2.6.2, CS4, photo rag 188 and A3 centered, but print is 2cm high and 2mm to the left on the paper - is this another CS4/OSX 10.5 issue or...
7649
Hans & Chia
pictochrome
Mar 2, 2009 4:38 pm
HI, Go for ColoPort a free utility grom x-rite http://www.xrite.com/product_overview.aspx?Action=support&ID=719 It's really great. You can easy make your own...
7650
robert49brake
Mar 2, 2009 8:18 pm
... Similar things happen with many Epson/Adobe/Mac combos in that, at the Page Setup menu boxes, the middle box (Format For) defaults to Any Printer. Check...
7651
wlh_1
Mar 3, 2009 9:06 pm
I would like to re-commission a 220 printer that I have to use MIS UTR2 inks in a CIS but be able to use either the MK or PK inks by creating the appropriate...
7652
Mike Kirwan
michael_kirwan
Mar 4, 2009 12:54 am
I have just purchased two sets of UTBO-R8 Set 3 inks for my R1800. Dropped them in the GLOP, PK and MK positions as indicated on the label and neither of the...
7653
michaeldsji
Mar 5, 2009 11:11 pm
This is my first attempt to use QuadTone RIP to calibrate and linearize my Epson 3800 using Ultrachrome K3 inks. I've downloaded and printed lots of manuals...
7654
pr_roark
Mar 5, 2009 11:28 pm
... You'll notice in the ink descriptions at http://www.paulroark.com/BW-Info/R220_R2_Readme.pdf that the light inks (LM, Y, and LC) are all the same density....
7655
pr_roark
Mar 5, 2009 11:32 pm
I recommend you call MIS. Paul www.PaulRoark.com...
7656
michaeldsji
Mar 6, 2009 12:24 am
I'd like to add to my original post: It seems that the 26-page "Quad Tone RIP User Guide" also available from the QuadtoneRip web site is the most complete...
7657
John Labovitz
johnlabovitz
Mar 6, 2009 2:06 am
Can you describe a bit more what problems you're having? Have you already figured out the ink limits? Are you just looking to linearize? --John...
7658
wlh_1
Mar 6, 2009 10:40 pm
... Why are the lite inks LC and LM the same density, and likewise why are the L and C inks the same density? Does it have to do with using this inkset with...
7659
Paul Roark
pr_roark
Mar 6, 2009 10:56 pm
... The R2 inkset was the hextone version of the EZ inkset -- minimalist. One could have 3 bottles and keep the machine running. ... I actually never thought...
7660
slcphoto73
Mar 6, 2009 11:56 pm
Please let me butt in here. What is missing, and what I would dearly love to have, is a guide **for beginners** on how and when to calibrate and linearize (and...
7661
wlh_1
Mar 6, 2009 11:58 pm
... Actually I never thought to use the Epson sliders but rather to use QTR to control the black and two greys. In my configuration I would use a neutral MK...
7662
Paul Roark
pr_roark
Mar 7, 2009 4:31 am
... Agreed. ... That's the formula I think is real close to ideal, and, in fact, close to where my 220 is headed next. If you're into glossy printing with...
7663
jorge caruso
rabsanito
Mar 7, 2009 8:58 am
I think you are not alone with this problem Susan. I also would like to understand the process as I understand the whys and whens of the Zone System. After...
7664
Dileepa Wijesundera
dileepawijes...
Mar 7, 2009 9:11 am
Jorge/Susan Try and read up threads by Randy Ranchier, he went through the basics with me and out me out of misery. I managed to understand most of it except...
7665
michaeldsji
Mar 7, 2009 7:36 pm
... Of course I can: But first--I agree with Susan & Jorge that a beginner's guide, for both Mac and Windows users, would be a welcome addition. I will look up...
7666
inetstrkid@...
inetstrkid
Mar 7, 2009 8:04 pm
G Sent via BlackBerry by AT&T ... From: Dileepa Wijesundera <dileepa@...> Date: Sat, 7 Mar 2009 12:09:35 To: <QuadtoneRIP@yahoogroups.com> Subject:...
7667
jorge caruso
rabsanito
Mar 8, 2009 1:07 pm
Thanks Dileepa I'll take a look at that thread :-) Jorge ________________________________ From: Dileepa Wijesundera <dileepa@...> To:...
7669
michaeldsji
Mar 9, 2009 12:34 am
Hello friends: Earlier this week I started a thread: "Calibrating for Ultrachrome Inks." Thanks for the advice so far, especially that of digging up some posts...
7670
rickbehl
Mar 9, 2009 12:34 am
... You know what would be great is if someone is putting together this beginners guide they could post it in the files section of this group... I don't know...
7671
robert49brake
Mar 9, 2009 2:40 am
... This is where I am a little confused. You have printed on EEM successfully using the pre-existing profiles? And now you want to profile your machine so...
7672
robert49brake
Mar 9, 2009 2:49 am
... Oops, forgot to mention you will need to save the new file with a different name to the 4880-7880-9880-UC folder then run the install9880.command by double...
7673
natcarish
Mar 11, 2009 2:33 pm
I've checked and it's definitely set right for QTR - this problem has only appeared since upgrading to CS4 and Leopard...
