Is this the Chris Sugg that used to work at NMHG and forgot his old audit buddy?

Ed
--------------------------
Sent from my Edward Slusarski's BlackBerry Wireless Handheld


-----Original Message-----
From: SAPoniSeries@yahoogroups.com <SAPoniSeries@yahoogroups.com>
To: SAPoniSeries@yahoogroups.com <SAPoniSeries@yahoogroups.com>
Sent: Thu Oct 18 14:51:31 2007
Subject: Re: [SAPoniSeries] Default pswd

Hi Diana

Try

SAP* (06071992)
DDIC (19920706)

for a normal SAP system. If SAP* has been deleted, it is suppose to reset
back to PASS.

Chris

On 10/18/07, Marcus Boness <marcus.boness@...
<mailto:marcus.boness%40basycs.com> > wrote:
>
> sapxxpwd
>
> xx = Instance No.
>
> ________________________________
>
> Von: SAPoniSeries@yahoogroups.com <mailto:SAPoniSeries%40yahoogroups.com> 
<SAPoniSeries%40yahoogroups.com>[mailto:
> SAPoniSeries@yahoogroups.com <mailto:SAPoniSeries%40yahoogroups.com> 
<SAPoniSeries%40yahoogroups.com>]
> Im Auftrag von Diana Wetmore
> Gesendet: Donnerstag, 18. Oktober 2007 17:26
> An: SAPoniSeries@yahoogroups.com <mailto:SAPoniSeries%40yahoogroups.com> 
<SAPoniSeries%40yahoogroups.com>
> Betreff: [SAPoniSeries] Default pswd
>
> Can someone tell me the default password for <SID><instance>? (DEV001)
>
> Cheers,
> Diana Wetmore
> cell: 832.867.7413
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>
>

[Non-text portions of this message have been removed]




______________________________________________________________________
This e-mail has been scanned by Managed Email Content Service.
______________________________________________________________________


______________________________________________________________________
This e-mail has been scanned by Managed Email Content Service.
______________________________________________________________________


[Non-text portions of this message have been removed]

Hi Diana

Try

SAP* (06071992)
DDIC (19920706)

for a normal SAP system. If SAP* has been deleted, it is suppose to reset
back to PASS.

Chris


On 10/18/07, Marcus Boness <marcus.boness@...> wrote:
>
>   sapxxpwd
>
> xx = Instance No.
>
> ________________________________
>
> Von: SAPoniSeries@yahoogroups.com <SAPoniSeries%40yahoogroups.com>[mailto:
> SAPoniSeries@yahoogroups.com <SAPoniSeries%40yahoogroups.com>]
> Im Auftrag von Diana Wetmore
> Gesendet: Donnerstag, 18. Oktober 2007 17:26
> An: SAPoniSeries@yahoogroups.com <SAPoniSeries%40yahoogroups.com>
> Betreff: [SAPoniSeries] Default pswd
>
> Can someone tell me the default password for <SID><instance>? (DEV001)
>
> Cheers,
> Diana Wetmore
> cell: 832.867.7413
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>
>


[Non-text portions of this message have been removed]

sapxxpwd



xx = Instance No.



________________________________

Von: SAPoniSeries@yahoogroups.com [mailto:SAPoniSeries@yahoogroups.com]
Im Auftrag von Diana Wetmore
Gesendet: Donnerstag, 18. Oktober 2007 17:26
An: SAPoniSeries@yahoogroups.com
Betreff: [SAPoniSeries] Default pswd



Can someone tell me the default password for <SID><instance>? (DEV001)

Cheers,
Diana Wetmore
cell: 832.867.7413

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]

Can someone tell me the default password for <SID><instance>? (DEV001)

Cheers,
Diana Wetmore
cell: 832.867.7413

[Non-text portions of this message have been removed]

Hi member of this great SAP on iSeries Group!

We wanted to let you know that we are about to move this great group to the SAP
SDN. This is a new service of SAP that has similar features like the yahoo group
but adds several advantages.

A few of these advantages are the following ones:
- The threads are ordered "on a good basis" with "last update first" and the
threads are together => you get a lot more overview and can easily skip topics,
that you are not interested in
- You are part of the big SAP SDN Community
- You can REALLY search for old threads (in yahoo this seems often not to work
properly)
- SAP employees are watching and answering in these forums as well
- You are rewarded with "Forum Points" when you help to solve issues => you will
receive T-Shirts or similar stuff from SAP
- These forums are moderated by SAP => you can expect not to see SPAM in there
- You are just a mouse click away from additional SAP resources like developer
blogs, eLearning material, and a huge download area
- You can mark questions as solved so nobody has to read a whole thread just to
find out the problem is already solved
- Inside the SDN there are forums for all kinds of SAP related topics. It’s easy
to get in touch with experts from all these forums.

You can find more information on how to do this change at:
http://www.4soi.de/SDN-Forum.php

The corresponding SAP on iSeries group in the SDN is "SAP on DB2 UDB for i5/OS
(DB4)" which can be reached with the following link:
https://sdn.sap.com/irj/sdn/forum?forumID=186

The SAPoniSeries Group Admins

Volker Gueldenpfennig, Jan Stallkamp

Hi Prince,

I had a look around and there seems to be something like "Articles,
FAQs, How-to Guides, Whitepapers" where I might think, it is the
thing we are looking for ...
I will have to dig more into that as I didn't do a test in order to
place there some stuff to ...

Regards

Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de -
http://www.easymarketplace.de

--- In SAPoniSeries@yahoogroups.com, "Prince Sharma"
<write2prince@...> wrote:
>
> Hi Volker,
>
> Even I do not think that it would be possible. In that case isn't
yahoo
> better ;)
>
> Thanks,
> Prince
>
>
> On 6/19/07, Volker Gueldenpfennig <volker.gueldenpfennig@...>
> wrote:
> >
> >   Hi Prince,
> >
> > do you have an idea where there could be put in SDN ?
> > If yes, I do see a chance of doing that ...
> >
> > Regards
> >
> > Volker Gueldenpfennig, consolut.gmbh
> > http://www.consolut.de - http://www.4soi.de -
> > http://www.easymarketplace.de
> >
> > --- In SAPoniSeries@yahoogroups.com <SAPoniSeries%
40yahoogroups.com>,
> > "Prince Sharma"
> > <write2prince@> wrote:
> > >
> > > Hi All,
> > >
> > > Is there a way that we can upload / move our scripts from
> > yahoogroups to SDN.
> > >
> > > Thanks and regards,
> > > Prince
> > >
> > > On 17 Jun 2007 13:55:37 -0000,
SAPoniSeries@yahoogroups.com<SAPoniSeries%40yahoogroups.com>
> > > <SAPoniSeries@yahoogroups.com <SAPoniSeries%40yahoogroups.com>>
wrote:
> > > >
> > > > Hi member of this great SAP on iSeries Group!
> > > >
> > > > We wanted to let you know that we are about to move this great
> > group to the SAP SDN. This is a new service of SAP that has
similar
> > features like the yahoo group but adds several advantages.
> > > >
> > > > A few of these advantages are the following ones:
> > > > - The threads are ordered "on a good basis" with "last update
> > first" and the threads are together => you get a lot more overview
> > and can easily skip topics, that you are not interested in
> > > > - You are part of the big SAP SDN Community
> > > > - You can REALLY search for old threads (in yahoo this seems
> > often not to work properly)
> > > > - SAP employees are watching and answering in these forums as
well
> > > > - You are rewarded with "Forum Points" when you help to solve
> > issues => you will receive T-Shirts or similar stuff from SAP
> > > > - These forums are moderated by SAP => you can expect not to
see
> > SPAM in there
> > > > - You are just a mouse click away from additional SAP
resources
> > like developer blogs, eLearning material, and a huge download area
> > > > - You can mark questions as solved so nobody has to read a
whole
> > thread just to find out the problem is already solved
> > > > - Inside the SDN there are forums for all kinds of SAP related
> > topics. It's easy to get in touch with experts from all these
forums.
> > > >
> > > > You can find more information on how to do this change at:
> > > > http://www.4soi.de/SDN-Forum.php
> > > >
> > > > The corresponding SAP on iSeries group in the SDN is "SAP on
DB2
> > UDB for i5/OS (DB4)" which can be reached with the following link:
> > > > https://sdn.sap.com/irj/sdn/forum?forumID=186
> > > >
> > > > The SAPoniSeries Group Admins
> > > >
> > > > Volker Gueldenpfennig, Jan Stallkamp
> > > >
> > > >
> > > >
> > > >
> > > > Have a look to our homepage at:
http://www.EasyMarketplace.de<http://www.easymarketplace.de/>
> > > > To unsubscribe mailto: SAPoniSeries-
unsubscribe@yahoogroups.com<SAPoniSeries-unsubscribe%
40yahoogroups.com>
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > >
> > >
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>

Hi Volker,

Even I do not think that it would be possible. In that case isn't yahoo
better ;)

Thanks,
Prince


On 6/19/07, Volker Gueldenpfennig <volker.gueldenpfennig@...>
wrote:
>
>   Hi Prince,
>
> do you have an idea where there could be put in SDN ?
> If yes, I do see a chance of doing that ...
>
> Regards
>
> Volker Gueldenpfennig, consolut.gmbh
> http://www.consolut.de - http://www.4soi.de -
> http://www.easymarketplace.de
>
> --- In SAPoniSeries@yahoogroups.com <SAPoniSeries%40yahoogroups.com>,
> "Prince Sharma"
> <write2prince@...> wrote:
> >
> > Hi All,
> >
> > Is there a way that we can upload / move our scripts from
> yahoogroups to SDN.
> >
> > Thanks and regards,
> > Prince
> >
> > On 17 Jun 2007 13:55:37 -0000,
SAPoniSeries@yahoogroups.com<SAPoniSeries%40yahoogroups.com>
> > <SAPoniSeries@yahoogroups.com <SAPoniSeries%40yahoogroups.com>> wrote:
> > >
> > > Hi member of this great SAP on iSeries Group!
> > >
> > > We wanted to let you know that we are about to move this great
> group to the SAP SDN. This is a new service of SAP that has similar
> features like the yahoo group but adds several advantages.
> > >
> > > A few of these advantages are the following ones:
> > > - The threads are ordered "on a good basis" with "last update
> first" and the threads are together => you get a lot more overview
> and can easily skip topics, that you are not interested in
> > > - You are part of the big SAP SDN Community
> > > - You can REALLY search for old threads (in yahoo this seems
> often not to work properly)
> > > - SAP employees are watching and answering in these forums as well
> > > - You are rewarded with "Forum Points" when you help to solve
> issues => you will receive T-Shirts or similar stuff from SAP
> > > - These forums are moderated by SAP => you can expect not to see
> SPAM in there
> > > - You are just a mouse click away from additional SAP resources
> like developer blogs, eLearning material, and a huge download area
> > > - You can mark questions as solved so nobody has to read a whole
> thread just to find out the problem is already solved
> > > - Inside the SDN there are forums for all kinds of SAP related
> topics. It's easy to get in touch with experts from all these forums.
> > >
> > > You can find more information on how to do this change at:
> > > http://www.4soi.de/SDN-Forum.php
> > >
> > > The corresponding SAP on iSeries group in the SDN is "SAP on DB2
> UDB for i5/OS (DB4)" which can be reached with the following link:
> > > https://sdn.sap.com/irj/sdn/forum?forumID=186
> > >
> > > The SAPoniSeries Group Admins
> > >
> > > Volker Gueldenpfennig, Jan Stallkamp
> > >
> > >
> > >
> > >
> > > Have a look to our homepage at:
http://www.EasyMarketplace.de<http://www.easymarketplace.de/>
> > > To unsubscribe mailto:
SAPoniSeries-unsubscribe@yahoogroups.com<SAPoniSeries-unsubscribe%40yahoogroups.\
com>
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> >
>
>
>


[Non-text portions of this message have been removed]

Hi Prince,

do you have an idea where there could be put in SDN ?
If yes, I do see a chance of doing that ...

Regards

Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de -
http://www.easymarketplace.de

--- In SAPoniSeries@yahoogroups.com, "Prince Sharma"
<write2prince@...> wrote:
>
> Hi All,
>
> Is there a way that we can upload / move our scripts from
yahoogroups to SDN.
>
> Thanks and regards,
> Prince
>
> On 17 Jun 2007 13:55:37 -0000, SAPoniSeries@yahoogroups.com
> <SAPoniSeries@yahoogroups.com> wrote:
> >
> > Hi member of this great SAP on iSeries Group!
> >
> > We wanted to let you know that we are about to move this great
group to the SAP SDN. This is a new service of SAP that has similar
features like the yahoo group but adds several advantages.
> >
> > A few of these advantages are the following ones:
> > - The threads are ordered "on a good basis" with "last update
first" and the threads are together => you get a lot more overview
and can easily skip topics, that you are not interested in
> > - You are part of the big SAP SDN Community
> > - You can REALLY search for old threads (in yahoo this seems
often not to work properly)
> > - SAP employees are watching and answering in these forums as well
> > - You are rewarded with "Forum Points" when you help to solve
issues => you will receive T-Shirts or similar stuff from SAP
> > - These forums are moderated by SAP => you can expect not to see
SPAM in there
> > - You are just a mouse click away from additional SAP resources
like developer blogs, eLearning material, and a huge download area
> > - You can mark questions as solved so nobody has to read a whole
thread just to find out the problem is already solved
> > - Inside the SDN there are forums for all kinds of SAP related
topics. It's easy to get in touch with experts from all these forums.
> >
> > You can find more information on how to do this change at:
> > http://www.4soi.de/SDN-Forum.php
> >
> > The corresponding SAP on iSeries group in the SDN is "SAP on DB2
UDB for i5/OS (DB4)" which can be reached with the following link:
> > https://sdn.sap.com/irj/sdn/forum?forumID=186
> >
> > The SAPoniSeries Group Admins
> >
> > Volker Gueldenpfennig, Jan Stallkamp
> >
> >
> >
> >
> > Have a look to our homepage at: http://www.EasyMarketplace.de
> > To unsubscribe mailto: SAPoniSeries-unsubscribe@yahoogroups.com
> > Yahoo! Groups Links
> >
> >
> >
> >
>

Hi SAP gurus,
   I am new to this forum. Went through messages posted by you people.I must say,
you guys are doing gr8 job.
   I have a query. I found a site http://cdworld.vstore.ca  They are selling soft
copies of SAP certification courses at $10 each.I think it is low price.
   Anyways, my query is, has anybody tried that site? Are they providing good
material and can that help in certification exam?
  if you have any study material, will u pls like to share with me?I am new to
SAP.
   Pls mail me at cv_rddy@...

   rgds
   reddy


---------------------------------
Need Mail bonding?
Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users.

[Non-text portions of this message have been removed]

Hi all!

Anyone is using workflow in 46C release with integration on Outlook via
SAPforms and MAPI? What is the version of Outlook? Are there problems
using OL2003?

We're planning to upgrade R/3 to ECC 6.0, workflow still running after
the upgrade? And how do I integrate with mail service, by WAS 640?

Best Regards,


André Koji Honma
FUJIFILM Brazil

The receivers should be in a new R3<sid>JRN library located in ASP 1
(library created in instructions I sent before)



MARK S. RINEHART

iSeries/SAP Systems Administrator
Upsher-Smith Laboratories, Inc.




Crosby Sinclair <medis1@...>
Sent by: SAPoniSeries@yahoogroups.com
03/26/2007 03:13 PM
Please respond to
SAPoniSeries@yahoogroups.com


To
SAPoniSeries@yahoogroups.com
cc

Subject
Re: [SAPoniSeries] Re: Client copy - journaling and asp usage






Mark thanks again for your assistance. One more question because I have
never deleted and recreate
the journal receivers, in the creation process to parm JRN is QSQJRN and
the library is R3<DATABASE>DATA with the
parm JRNRCV what is the name and lib should be entered here? Thanks again
for your assistance and please send me the
link to SDN so I can join. Thanks again.

----- Original Message ----
From: "mark.rinehart@..." <mark.rinehart@...>
To: SAPoniSeries@yahoogroups.com
Sent: Monday, March 26, 2007 10:27:09 AM
Subject: Re: [SAPoniSeries] Re: Client copy - journaling and asp usage

Crosby (from Itelligence, correct)?

1. Run AS4FIXFILE and end journaling.
2. Create a new Journal Receiver Library on ASP1 (system ASP)
3. Create a new journal receiver in the new library
4. Delete QSQJRN in the R3 database library (CHGJRN does not allow you to
change the ASP designation)
5. Create a new QSQJRN in the R3 database library and assign ASP1 as well
as the new journal receiver and library just created!
5. Run AS4FIXFILE and startup journaling again

Should be using SDN for these questions!!

MARK S. RINEHART

iSeries/SAP Systems Administrator
Upsher-Smith Laboratories, Inc.

Crosby Sinclair <medis1@yahoo. com>
Sent by: SAPoniSeries@ yahoogroups. com
03/26/2007 09:13 AM
Please respond to
SAPoniSeries@ yahoogroups. com

To
SAPoniSeries@ yahoogroups. com
cc

Subject
Re: [SAPoniSeries] Re: Client copy - journaling and asp usage

Doreen,

I have a small 400 that I use as a practice box and I had created a second

ASP, however after installed a system on it I deleted the second ASP but
for got to stop the journaling. Now the system will not come up and there
are no journaling occuring. How do I recreate the journaling and point it
to ASP 1?

----- Original Message ----
From: "Anderson, Doreen" <danderson@ballhort. com>
To: SAPoniSeries@ yahoogroups. com
Sent: Wednesday, January 17, 2007 2:27:11 PM
Subject: RE: [SAPoniSeries] Re: Client copy - journaling and asp usage

Even with *AUTODELETE the receivers won't delete until the copy
completes due to SAP's commit cycles

____________ _________ _________ __

From: SAPoniSeries@ yahoogroups. com [mailto:SAPoniSerie s@ yahoogroups.
com]
On Behalf Of Volker Gueldenpfennig
Sent: Wednesday, January 17, 2007 12:06 PM
To: SAPoniSeries@ yahoogroups. com
Subject: [SAPoniSeries] Re: Client copy - journaling and asp usage

Hi Joe,

you should set the *JRNRCVs for that time on *AUTODELETE ...that
would be the easiest.
turning off doesn't work, because SAP uses COMMIT.

Regards

Volker Gueldenpfennig, consolut.gmbh
http://www.consolut .de <http://www.consolut .de> - http://www.4soi. de
<http://www.4soi. de> -
http://www.easymark etplace.de <http://www.easymark etplace.de>

--- In SAPoniSeries@ yahoogroups. com
<mailto:SAPoniSerie s%40yahoogroups. com> , "jo001di" <jo001di@... >
wrote:
>
>
> I will be doing a client copy from our Production system to one of
our
> clients in development. Our current ASP usage is at 91%.
>
> Should I stop journaling or should I just delete the files while
the
> client copy is running to avoid any problems.
>
> Space at 91% percent should be OK, since the client copy is going
to
> delete the client first and then copy from production.
>
> Or should I delete the client first, which I think is a waste of
time
> since the client copy is going to do the same.
>
> Should I run a test run first.
>
> Thanks
> Joe
>

[Non-text portions of this message have been removed]

____________ _________ _________ _________ _________ _________ _
8:00? 8:25? 8:40? Find a flick in no time
with the Yahoo! Search movie showtime shortcut.
http://tools. search.yahoo. com/shortcuts/ #news

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

__________________________________________________________
Get your own web address.
Have a HUGE year through Yahoo! Small Business.
http://smallbusiness.yahoo.com/domains/?p=BESTDEAL

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]

Mark thanks again for your assistance.  One more question because I have never
deleted and recreate
the journal receivers, in the creation process to parm JRN is QSQJRN and the
library is R3<DATABASE>DATA with the
parm JRNRCV what is the name and lib should be entered here?  Thanks again for
your assistance and please send me the
link to SDN so I can join.  Thanks again.


----- Original Message ----
From: "mark.rinehart@..." <mark.rinehart@...>
To: SAPoniSeries@yahoogroups.com
Sent: Monday, March 26, 2007 10:27:09 AM
Subject: Re: [SAPoniSeries] Re: Client copy - journaling and asp usage

Crosby (from Itelligence, correct)?

1. Run AS4FIXFILE and end journaling.
2. Create a new Journal Receiver Library on ASP1 (system ASP)
3. Create a new journal receiver in the new library
4. Delete QSQJRN in the R3 database library (CHGJRN does not allow you to
change the ASP designation)
5. Create a new QSQJRN in the R3 database library and assign ASP1 as well
as the new journal receiver and library just created!
5. Run AS4FIXFILE and startup journaling again

Should be using SDN for these questions!!

MARK S. RINEHART

iSeries/SAP Systems Administrator
Upsher-Smith Laboratories, Inc.

Crosby Sinclair <medis1@yahoo. com>
Sent by: SAPoniSeries@ yahoogroups. com
03/26/2007 09:13 AM
Please respond to
SAPoniSeries@ yahoogroups. com

To
SAPoniSeries@ yahoogroups. com
cc

Subject
Re: [SAPoniSeries] Re: Client copy - journaling and asp usage

Doreen,

I have a small 400 that I use as a practice box and I had created a second
ASP, however after installed a system on it I deleted the second ASP but
for got to stop the journaling. Now the system will not come up and there
are no journaling occuring. How do I recreate the journaling and point it
to ASP 1?

----- Original Message ----
From: "Anderson, Doreen" <danderson@ballhort. com>
To: SAPoniSeries@ yahoogroups. com
Sent: Wednesday, January 17, 2007 2:27:11 PM
Subject: RE: [SAPoniSeries] Re: Client copy - journaling and asp usage

Even with *AUTODELETE the receivers won't delete until the copy
completes due to SAP's commit cycles

____________ _________ _________ __

From: SAPoniSeries@ yahoogroups. com [mailto:SAPoniSerie s@ yahoogroups.
com]
On Behalf Of Volker Gueldenpfennig
Sent: Wednesday, January 17, 2007 12:06 PM
To: SAPoniSeries@ yahoogroups. com
Subject: [SAPoniSeries] Re: Client copy - journaling and asp usage

Hi Joe,

you should set the *JRNRCVs for that time on *AUTODELETE ...that
would be the easiest.
turning off doesn't work, because SAP uses COMMIT.

Regards

Volker Gueldenpfennig, consolut.gmbh
http://www.consolut .de <http://www.consolut .de> - http://www.4soi. de
<http://www.4soi. de> -
http://www.easymark etplace.de <http://www.easymark etplace.de>

--- In SAPoniSeries@ yahoogroups. com
<mailto:SAPoniSerie s%40yahoogroups. com> , "jo001di" <jo001di@... >
wrote:
>
>
> I will be doing a client copy from our Production system to one of
our
> clients in development. Our current ASP usage is at 91%.
>
> Should I stop journaling or should I just delete the files while
the
> client copy is running to avoid any problems.
>
> Space at 91% percent should be OK, since the client copy is going
to
> delete the client first and then copy from production.
>
> Or should I delete the client first, which I think is a waste of
time
> since the client copy is going to do the same.
>
> Should I run a test run first.
>
> Thanks
> Joe
>

[Non-text portions of this message have been removed]

____________ _________ _________ _________ _________ _________ _
8:00? 8:25? 8:40? Find a flick in no time
with the Yahoo! Search movie showtime shortcut.
http://tools. search.yahoo. com/shortcuts/ #news

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]






________________________________________________________________________________\
____
Get your own web address.
Have a HUGE year through Yahoo! Small Business.
http://smallbusiness.yahoo.com/domains/?p=BESTDEAL

[Non-text portions of this message have been removed]

THANKS MARK.


----- Original Message ----
From: "mark.rinehart@..." <mark.rinehart@...>
To: SAPoniSeries@yahoogroups.com
Sent: Monday, March 26, 2007 10:27:09 AM
Subject: Re: [SAPoniSeries] Re: Client copy - journaling and asp usage

Crosby (from Itelligence, correct)?

1. Run AS4FIXFILE and end journaling.
2. Create a new Journal Receiver Library on ASP1 (system ASP)
3. Create a new journal receiver in the new library
4. Delete QSQJRN in the R3 database library (CHGJRN does not allow you to
change the ASP designation)
5. Create a new QSQJRN in the R3 database library and assign ASP1 as well
as the new journal receiver and library just created!
5. Run AS4FIXFILE and startup journaling again

Should be using SDN for these questions!!

MARK S. RINEHART

iSeries/SAP Systems Administrator
Upsher-Smith Laboratories, Inc.

Crosby Sinclair <medis1@yahoo. com>
Sent by: SAPoniSeries@ yahoogroups. com
03/26/2007 09:13 AM
Please respond to
SAPoniSeries@ yahoogroups. com

To
SAPoniSeries@ yahoogroups. com
cc

Subject
Re: [SAPoniSeries] Re: Client copy - journaling and asp usage

Doreen,

I have a small 400 that I use as a practice box and I had created a second
ASP, however after installed a system on it I deleted the second ASP but
for got to stop the journaling. Now the system will not come up and there
are no journaling occuring. How do I recreate the journaling and point it
to ASP 1?

----- Original Message ----
From: "Anderson, Doreen" <danderson@ballhort. com>
To: SAPoniSeries@ yahoogroups. com
Sent: Wednesday, January 17, 2007 2:27:11 PM
Subject: RE: [SAPoniSeries] Re: Client copy - journaling and asp usage

Even with *AUTODELETE the receivers won't delete until the copy
completes due to SAP's commit cycles

____________ _________ _________ __

From: SAPoniSeries@ yahoogroups. com [mailto:SAPoniSerie s@ yahoogroups.
com]
On Behalf Of Volker Gueldenpfennig
Sent: Wednesday, January 17, 2007 12:06 PM
To: SAPoniSeries@ yahoogroups. com
Subject: [SAPoniSeries] Re: Client copy - journaling and asp usage

Hi Joe,

you should set the *JRNRCVs for that time on *AUTODELETE ...that
would be the easiest.
turning off doesn't work, because SAP uses COMMIT.

Regards

Volker Gueldenpfennig, consolut.gmbh
http://www.consolut .de <http://www.consolut .de> - http://www.4soi. de
<http://www.4soi. de> -
http://www.easymark etplace.de <http://www.easymark etplace.de>

--- In SAPoniSeries@ yahoogroups. com
<mailto:SAPoniSerie s%40yahoogroups. com> , "jo001di" <jo001di@... >
wrote:
>
>
> I will be doing a client copy from our Production system to one of
our
> clients in development. Our current ASP usage is at 91%.
>
> Should I stop journaling or should I just delete the files while
the
> client copy is running to avoid any problems.
>
> Space at 91% percent should be OK, since the client copy is going
to
> delete the client first and then copy from production.
>
> Or should I delete the client first, which I think is a waste of
time
> since the client copy is going to do the same.
>
> Should I run a test run first.
>
> Thanks
> Joe
>

[Non-text portions of this message have been removed]

____________ _________ _________ _________ _________ _________ _
8:00? 8:25? 8:40? Find a flick in no time
with the Yahoo! Search movie showtime shortcut.
http://tools. search.yahoo. com/shortcuts/ #news

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]






________________________________________________________________________________\
____
Never miss an email again!
Yahoo! Toolbar alerts you the instant new Mail arrives.
http://tools.search.yahoo.com/toolbar/features/mail/

[Non-text portions of this message have been removed]

Crosby (from Itelligence, correct)?


1.  Run AS4FIXFILE and end journaling.
2.  Create a new Journal Receiver Library on ASP1 (system ASP)
3.  Create a new journal receiver in the new library
4.  Delete QSQJRN in the R3 database library (CHGJRN does not allow you to
change the ASP designation)
5.  Create a new QSQJRN in the R3 database library and assign ASP1 as well
as the new journal receiver and library just created!
5.  Run AS4FIXFILE and startup journaling again


Should be using SDN for these questions!!


MARK S. RINEHART

iSeries/SAP Systems Administrator
Upsher-Smith Laboratories, Inc.








Crosby Sinclair <medis1@...>
Sent by: SAPoniSeries@yahoogroups.com
03/26/2007 09:13 AM
Please respond to
SAPoniSeries@yahoogroups.com


To
SAPoniSeries@yahoogroups.com
cc

Subject
Re: [SAPoniSeries] Re: Client copy - journaling and asp usage






Doreen,

I have a small 400 that I use as a practice box and I had created a second
ASP, however after installed a system on it I deleted the second ASP but
for got to stop the journaling. Now the system will not come up and there
are no journaling occuring. How do I recreate the journaling and point it
to ASP 1?

----- Original Message ----
From: "Anderson, Doreen" <danderson@...>
To: SAPoniSeries@yahoogroups.com
Sent: Wednesday, January 17, 2007 2:27:11 PM
Subject: RE: [SAPoniSeries] Re: Client copy - journaling and asp usage

Even with *AUTODELETE the receivers won't delete until the copy
completes due to SAP's commit cycles

____________ _________ _________ __

From: SAPoniSeries@ yahoogroups. com [mailto:SAPoniSeries@ yahoogroups.
com]
On Behalf Of Volker Gueldenpfennig
Sent: Wednesday, January 17, 2007 12:06 PM
To: SAPoniSeries@ yahoogroups. com
Subject: [SAPoniSeries] Re: Client copy - journaling and asp usage

Hi Joe,

you should set the *JRNRCVs for that time on *AUTODELETE ...that
would be the easiest.
turning off doesn't work, because SAP uses COMMIT.

Regards

Volker Gueldenpfennig, consolut.gmbh
http://www.consolut .de <http://www.consolut .de> - http://www.4soi. de
<http://www.4soi. de> -
http://www.easymark etplace.de <http://www.easymark etplace.de>

--- In SAPoniSeries@ yahoogroups. com
<mailto:SAPoniSerie s%40yahoogroups. com> , "jo001di" <jo001di@... >
wrote:
>
>
> I will be doing a client copy from our Production system to one of
our
> clients in development. Our current ASP usage is at 91%.
>
> Should I stop journaling or should I just delete the files while
the
> client copy is running to avoid any problems.
>
> Space at 91% percent should be OK, since the client copy is going
to
> delete the client first and then copy from production.
>
> Or should I delete the client first, which I think is a waste of
time
> since the client copy is going to do the same.
>
> Should I run a test run first.
>
> Thanks
> Joe
>

[Non-text portions of this message have been removed]

__________________________________________________________
8:00? 8:25? 8:40? Find a flick in no time
with the Yahoo! Search movie showtime shortcut.
http://tools.search.yahoo.com/shortcuts/#news

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]

Doreen,

I have a small 400 that I use as a practice box and I had created a second ASP,
however after installed a system on it I deleted the second ASP but for got to
stop the journaling.  Now the system will not come up and there are no
journaling occuring.  How do I recreate the journaling and point it to ASP 1?


----- Original Message ----
From: "Anderson, Doreen" <danderson@...>
To: SAPoniSeries@yahoogroups.com
Sent: Wednesday, January 17, 2007 2:27:11 PM
Subject: RE: [SAPoniSeries] Re: Client copy - journaling and asp usage

Even with *AUTODELETE the receivers won't delete until the copy
completes due to SAP's commit cycles

____________ _________ _________ __

From: SAPoniSeries@ yahoogroups. com [mailto:SAPoniSeries@ yahoogroups. com]
On Behalf Of Volker Gueldenpfennig
Sent: Wednesday, January 17, 2007 12:06 PM
To: SAPoniSeries@ yahoogroups. com
Subject: [SAPoniSeries] Re: Client copy - journaling and asp usage

Hi Joe,

you should set the *JRNRCVs for that time on *AUTODELETE ...that
would be the easiest.
turning off doesn't work, because SAP uses COMMIT.

Regards

Volker Gueldenpfennig, consolut.gmbh
http://www.consolut .de <http://www.consolut .de> - http://www.4soi. de
<http://www.4soi. de> -
http://www.easymark etplace.de <http://www.easymark etplace.de>

--- In SAPoniSeries@ yahoogroups. com
<mailto:SAPoniSerie s%40yahoogroups. com> , "jo001di" <jo001di@... > wrote:
>
>
> I will be doing a client copy from our Production system to one of
our
> clients in development. Our current ASP usage is at 91%.
>
> Should I stop journaling or should I just delete the files while
the
> client copy is running to avoid any problems.
>
> Space at 91% percent should be OK, since the client copy is going
to
> delete the client first and then copy from production.
>
> Or should I delete the client first, which I think is a waste of
time
> since the client copy is going to do the same.
>
> Should I run a test run first.
>
> Thanks
> Joe
>

[Non-text portions of this message have been removed]






________________________________________________________________________________\
____
8:00? 8:25? 8:40? Find a flick in no time
with the Yahoo! Search movie showtime shortcut.
http://tools.search.yahoo.com/shortcuts/#news

[Non-text portions of this message have been removed]

Since we are still at 4.0B (don't ask and I promise I won't scream), I
guess TPPARAM is where I should look. I'll look in OSS notes and see
you over at the SDN.

--- In SAPoniSeries@yahoogroups.com, "Volker Gueldenpfennig"
<volker.gueldenpfennig@...> wrote:
>
> Hi Rick,
>
> TPPARAM is since 4.5x outdated ... it is the TP parameters in STMS
> that are stored (copied) to DOMAIN_sid.PFL or similar ...
>
> Regards
>
> Volker
>
> --- In SAPoniSeries@yahoogroups.com, "githman3" <rgithens@> wrote:
> >
> > Cross posting again - sorry. The STMS profile? Is that what I get
> when
> > I look at the TP parameters? or look at TPPARAM on the host? I'll
> > follow up over on SDN when I finally come up for air. Thanks again.
> >
> > --- In SAPoniSeries@yahoogroups.com, "Volker Gueldenpfennig"
> > <volker.gueldenpfennig@> wrote:
> > >
> > > Hi Rick,
> > >
> > > SDN is SAP Developer Network and you should have a look at the
> > > following site for these kind of questions:
> > > https://sdn.sap.com/irj/sdn/forum?forumID=186
> > >
> > > YES, the stuff is imported in the order in the queue - not in
> any
> > > date order (even when it should map mostly).
> > > If you are outdated now, I'm pretty sure, your import buffer was
> > > manipulated :-((
> > >
> > > How to disable the "import all button" ?
> > > In the STMS profile activate the following:
> > > NO_IMPORT_ALL 	 1
> > >
> > > When doing the stuff above, the following makes sense as well in
> my
> > > eyes:
> > > IMPORT_SINGLE_ONLY 	 1
> > > IMPORT_SINGLE_STRATEGY 	 1
> > >
> > > Regards
> > >
> > > Volker Gueldenpfennig, consolut.gmbh
> > > http://www.consolut.de - http://www.4soi.de -
> > > http://www.easymarketplace.de
> > >
> > > --- In SAPoniSeries@yahoogroups.com, "githman3" <rgithens@>
> wrote:
> > > >
> > > > What, pray tell is the SDN? I would be happy to move my
> questions
> > > > wherever is appropriate. I would also be happy to reconsider
> our
> > > > transport strategy to something that makes sense - perhaps you
> > > could
> > > > give me a hint. This is an absolute mess and I don't
> understand
> > > why. I
> > > > would have thought that the immport all would import in date
> > > sequence.
> > > > We have SAP programs that are two or three service packs
> behind and
> > > > user programs that are 7 or 8 transports behind. At the moment
> we
> > > are
> > > > picking them off one at a time as the problems arise. Finally,
> how
> > > do
> > > > I disable that import all button? Thanks.
> > > >
> > > > --- In SAPoniSeries@yahoogroups.com, "Volker Gueldenpfennig"
> > > > <volker.gueldenpfennig@> wrote:
> > > > >
> > > > > Hi Rick,
> > > > >
> > > > > the only option is RMVJRNCHG or APYJRNCHG with the last
> backup.
> > > > > Perhaps this could be reduced to a few tables only - but
> this is
> > > > > even very depending on the transports. Once, I did this
> based on
> > > the
> > > > > transports for 6-10 tables ...
> > > > >
> > > > > But, you should reconcider your transport strategy !
> > > > > btw: you can disable the "import all" button if you like as
> > > well ...
> > > > >
> > > > > AND:
> > > > > Please move your questions to the SDN :-)
> > > > >
> > > > > Regards
> > > > >
> > > > > Volker Gueldenpfennig, consolut.gmbh
> > > > > http://www.consolut.de - http://www.4soi.de -
> > > > > http://www.easymarketplace.de
> > > > >
> > > > > --- In SAPoniSeries@yahoogroups.com, "githman3" <rgithens@>
> > > wrote:
> > > > > >
> > > > > > Since go-live in July of 1999, we have always done our
> inports
> > > > > > individually from the command line. Rightly or wrongly,
> that's
> > > the
> > > > > way
> > > > > > we were taught to do it. (I'm guessing part of that was
> > > because of
> > > > > all
> > > > > > the addtobuffers for multiple clients in DEV). We have
> recently
> > > > > > upgraded to zero-interactive boxes and have been doing our
> > > imports
> > > > > > through STMS. However, someone mistakenly did an import of
> the
> > > > > queue
> > > > > > instad of an individual request (effectively doing an
> import
> > > ALL).
> > > > > > This has created a major mess so ...
> > > > > >
> > > > > > 1) Is there a recovery from this other than RMVJRNCHG? (a
> > > prospect
> > > > > I
> > > > > > am definitely not looking forward to)
> > > > > > 2) Should we be doing import ALL on a regular basis? (like
> > > before
> > > > > > every support package install)
> > > > > >
> > > > > > Thanks,
> > > > > > Rick
> > > > > >
> > > > >
> > > >
> > >
> >
>

Hi Rick,

TPPARAM is since 4.5x outdated ... it is the TP parameters in STMS
that are stored (copied) to DOMAIN_sid.PFL or similar ...

Regards

Volker

--- In SAPoniSeries@yahoogroups.com, "githman3" <rgithens@...> wrote:
>
> Cross posting again - sorry. The STMS profile? Is that what I get
when
> I look at the TP parameters? or look at TPPARAM on the host? I'll
> follow up over on SDN when I finally come up for air. Thanks again.
>
> --- In SAPoniSeries@yahoogroups.com, "Volker Gueldenpfennig"
> <volker.gueldenpfennig@> wrote:
> >
> > Hi Rick,
> >
> > SDN is SAP Developer Network and you should have a look at the
> > following site for these kind of questions:
> > https://sdn.sap.com/irj/sdn/forum?forumID=186
> >
> > YES, the stuff is imported in the order in the queue - not in
any
> > date order (even when it should map mostly).
> > If you are outdated now, I'm pretty sure, your import buffer was
> > manipulated :-((
> >
> > How to disable the "import all button" ?
> > In the STMS profile activate the following:
> > NO_IMPORT_ALL 	 1
> >
> > When doing the stuff above, the following makes sense as well in
my
> > eyes:
> > IMPORT_SINGLE_ONLY 	 1
> > IMPORT_SINGLE_STRATEGY 	 1
> >
> > Regards
> >
> > Volker Gueldenpfennig, consolut.gmbh
> > http://www.consolut.de - http://www.4soi.de -
> > http://www.easymarketplace.de
> >
> > --- In SAPoniSeries@yahoogroups.com, "githman3" <rgithens@>
wrote:
> > >
> > > What, pray tell is the SDN? I would be happy to move my
questions
> > > wherever is appropriate. I would also be happy to reconsider
our
> > > transport strategy to something that makes sense - perhaps you
> > could
> > > give me a hint. This is an absolute mess and I don't
understand
> > why. I
> > > would have thought that the immport all would import in date
> > sequence.
> > > We have SAP programs that are two or three service packs
behind and
> > > user programs that are 7 or 8 transports behind. At the moment
we
> > are
> > > picking them off one at a time as the problems arise. Finally,
how
> > do
> > > I disable that import all button? Thanks.
> > >
> > > --- In SAPoniSeries@yahoogroups.com, "Volker Gueldenpfennig"
> > > <volker.gueldenpfennig@> wrote:
> > > >
> > > > Hi Rick,
> > > >
> > > > the only option is RMVJRNCHG or APYJRNCHG with the last
backup.
> > > > Perhaps this could be reduced to a few tables only - but
this is
> > > > even very depending on the transports. Once, I did this
based on
> > the
> > > > transports for 6-10 tables ...
> > > >
> > > > But, you should reconcider your transport strategy !
> > > > btw: you can disable the "import all" button if you like as
> > well ...
> > > >
> > > > AND:
> > > > Please move your questions to the SDN :-)
> > > >
> > > > Regards
> > > >
> > > > Volker Gueldenpfennig, consolut.gmbh
> > > > http://www.consolut.de - http://www.4soi.de -
> > > > http://www.easymarketplace.de
> > > >
> > > > --- In SAPoniSeries@yahoogroups.com, "githman3" <rgithens@>
> > wrote:
> > > > >
> > > > > Since go-live in July of 1999, we have always done our
inports
> > > > > individually from the command line. Rightly or wrongly,
that's
> > the
> > > > way
> > > > > we were taught to do it. (I'm guessing part of that was
> > because of
> > > > all
> > > > > the addtobuffers for multiple clients in DEV). We have
recently
> > > > > upgraded to zero-interactive boxes and have been doing our
> > imports
> > > > > through STMS. However, someone mistakenly did an import of
the
> > > > queue
> > > > > instad of an individual request (effectively doing an
import
> > ALL).
> > > > > This has created a major mess so ...
> > > > >
> > > > > 1) Is there a recovery from this other than RMVJRNCHG? (a
> > prospect
> > > > I
> > > > > am definitely not looking forward to)
> > > > > 2) Should we be doing import ALL on a regular basis? (like
> > before
> > > > > every support package install)
> > > > >
> > > > > Thanks,
> > > > > Rick
> > > > >
> > > >
> > >
> >
>

Cross posting again - sorry. The STMS profile? Is that what I get when
I look at the TP parameters? or look at TPPARAM on the host? I'll
follow up over on SDN when I finally come up for air. Thanks again.

--- In SAPoniSeries@yahoogroups.com, "Volker Gueldenpfennig"
<volker.gueldenpfennig@...> wrote:
>
> Hi Rick,
>
> SDN is SAP Developer Network and you should have a look at the
> following site for these kind of questions:
> https://sdn.sap.com/irj/sdn/forum?forumID=186
>
> YES, the stuff is imported in the order in the queue - not in any
> date order (even when it should map mostly).
> If you are outdated now, I'm pretty sure, your import buffer was
> manipulated :-((
>
> How to disable the "import all button" ?
> In the STMS profile activate the following:
> NO_IMPORT_ALL 	 1
>
> When doing the stuff above, the following makes sense as well in my
> eyes:
> IMPORT_SINGLE_ONLY 	 1
> IMPORT_SINGLE_STRATEGY 	 1
>
> Regards
>
> Volker Gueldenpfennig, consolut.gmbh
> http://www.consolut.de - http://www.4soi.de -
> http://www.easymarketplace.de
>
> --- In SAPoniSeries@yahoogroups.com, "githman3" <rgithens@> wrote:
> >
> > What, pray tell is the SDN? I would be happy to move my questions
> > wherever is appropriate. I would also be happy to reconsider our
> > transport strategy to something that makes sense - perhaps you
> could
> > give me a hint. This is an absolute mess and I don't understand
> why. I
> > would have thought that the immport all would import in date
> sequence.
> > We have SAP programs that are two or three service packs behind and
> > user programs that are 7 or 8 transports behind. At the moment we
> are
> > picking them off one at a time as the problems arise. Finally, how
> do
> > I disable that import all button? Thanks.
> >
> > --- In SAPoniSeries@yahoogroups.com, "Volker Gueldenpfennig"
> > <volker.gueldenpfennig@> wrote:
> > >
> > > Hi Rick,
> > >
> > > the only option is RMVJRNCHG or APYJRNCHG with the last backup.
> > > Perhaps this could be reduced to a few tables only - but this is
> > > even very depending on the transports. Once, I did this based on
> the
> > > transports for 6-10 tables ...
> > >
> > > But, you should reconcider your transport strategy !
> > > btw: you can disable the "import all" button if you like as
> well ...
> > >
> > > AND:
> > > Please move your questions to the SDN :-)
> > >
> > > Regards
> > >
> > > Volker Gueldenpfennig, consolut.gmbh
> > > http://www.consolut.de - http://www.4soi.de -
> > > http://www.easymarketplace.de
> > >
> > > --- In SAPoniSeries@yahoogroups.com, "githman3" <rgithens@>
> wrote:
> > > >
> > > > Since go-live in July of 1999, we have always done our inports
> > > > individually from the command line. Rightly or wrongly, that's
> the
> > > way
> > > > we were taught to do it. (I'm guessing part of that was
> because of
> > > all
> > > > the addtobuffers for multiple clients in DEV). We have recently
> > > > upgraded to zero-interactive boxes and have been doing our
> imports
> > > > through STMS. However, someone mistakenly did an import of the
> > > queue
> > > > instad of an individual request (effectively doing an import
> ALL).
> > > > This has created a major mess so ...
> > > >
> > > > 1) Is there a recovery from this other than RMVJRNCHG? (a
> prospect
> > > I
> > > > am definitely not looking forward to)
> > > > 2) Should we be doing import ALL on a regular basis? (like
> before
> > > > every support package install)
> > > >
> > > > Thanks,
> > > > Rick
> > > >
> > >
> >
>

OK - I found the SDN so you can ignore that question.

Hi Rick,

SDN is SAP Developer Network and you should have a look at the
following site for these kind of questions:
https://sdn.sap.com/irj/sdn/forum?forumID=186

YES, the stuff is imported in the order in the queue - not in any
date order (even when it should map mostly).
If you are outdated now, I'm pretty sure, your import buffer was
manipulated :-((

How to disable the "import all button" ?
In the STMS profile activate the following:
NO_IMPORT_ALL 	 1

When doing the stuff above, the following makes sense as well in my
eyes:
IMPORT_SINGLE_ONLY 	 1
IMPORT_SINGLE_STRATEGY 	 1

Regards

Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de -
http://www.easymarketplace.de

--- In SAPoniSeries@yahoogroups.com, "githman3" <rgithens@...> wrote:
>
> What, pray tell is the SDN? I would be happy to move my questions
> wherever is appropriate. I would also be happy to reconsider our
> transport strategy to something that makes sense - perhaps you
could
> give me a hint. This is an absolute mess and I don't understand
why. I
> would have thought that the immport all would import in date
sequence.
> We have SAP programs that are two or three service packs behind and
> user programs that are 7 or 8 transports behind. At the moment we
are
> picking them off one at a time as the problems arise. Finally, how
do
> I disable that import all button? Thanks.
>
> --- In SAPoniSeries@yahoogroups.com, "Volker Gueldenpfennig"
> <volker.gueldenpfennig@> wrote:
> >
> > Hi Rick,
> >
> > the only option is RMVJRNCHG or APYJRNCHG with the last backup.
> > Perhaps this could be reduced to a few tables only - but this is
> > even very depending on the transports. Once, I did this based on
the
> > transports for 6-10 tables ...
> >
> > But, you should reconcider your transport strategy !
> > btw: you can disable the "import all" button if you like as
well ...
> >
> > AND:
> > Please move your questions to the SDN :-)
> >
> > Regards
> >
> > Volker Gueldenpfennig, consolut.gmbh
> > http://www.consolut.de - http://www.4soi.de -
> > http://www.easymarketplace.de
> >
> > --- In SAPoniSeries@yahoogroups.com, "githman3" <rgithens@>
wrote:
> > >
> > > Since go-live in July of 1999, we have always done our inports
> > > individually from the command line. Rightly or wrongly, that's
the
> > way
> > > we were taught to do it. (I'm guessing part of that was
because of
> > all
> > > the addtobuffers for multiple clients in DEV). We have recently
> > > upgraded to zero-interactive boxes and have been doing our
imports
> > > through STMS. However, someone mistakenly did an import of the
> > queue
> > > instad of an individual request (effectively doing an import
ALL).
> > > This has created a major mess so ...
> > >
> > > 1) Is there a recovery from this other than RMVJRNCHG? (a
prospect
> > I
> > > am definitely not looking forward to)
> > > 2) Should we be doing import ALL on a regular basis? (like
before
> > > every support package install)
> > >
> > > Thanks,
> > > Rick
> > >
> >
>

What, pray tell is the SDN? I would be happy to move my questions
wherever is appropriate. I would also be happy to reconsider our
transport strategy to something that makes sense - perhaps you could
give me a hint. This is an absolute mess and I don't understand why. I
would have thought that the immport all would import in date sequence.
We have SAP programs that are two or three service packs behind and
user programs that are 7 or 8 transports behind. At the moment we are
picking them off one at a time as the problems arise. Finally, how do
I disable that import all button? Thanks.

--- In SAPoniSeries@yahoogroups.com, "Volker Gueldenpfennig"
<volker.gueldenpfennig@...> wrote:
>
> Hi Rick,
>
> the only option is RMVJRNCHG or APYJRNCHG with the last backup.
> Perhaps this could be reduced to a few tables only - but this is
> even very depending on the transports. Once, I did this based on the
> transports for 6-10 tables ...
>
> But, you should reconcider your transport strategy !
> btw: you can disable the "import all" button if you like as well ...
>
> AND:
> Please move your questions to the SDN :-)
>
> Regards
>
> Volker Gueldenpfennig, consolut.gmbh
> http://www.consolut.de - http://www.4soi.de -
> http://www.easymarketplace.de
>
> --- In SAPoniSeries@yahoogroups.com, "githman3" <rgithens@> wrote:
> >
> > Since go-live in July of 1999, we have always done our inports
> > individually from the command line. Rightly or wrongly, that's the
> way
> > we were taught to do it. (I'm guessing part of that was because of
> all
> > the addtobuffers for multiple clients in DEV). We have recently
> > upgraded to zero-interactive boxes and have been doing our imports
> > through STMS. However, someone mistakenly did an import of the
> queue
> > instad of an individual request (effectively doing an import ALL).
> > This has created a major mess so ...
> >
> > 1) Is there a recovery from this other than RMVJRNCHG? (a prospect
> I
> > am definitely not looking forward to)
> > 2) Should we be doing import ALL on a regular basis? (like before
> > every support package install)
> >
> > Thanks,
> > Rick
> >
>

Hi Rick,

the only option is RMVJRNCHG or APYJRNCHG with the last backup.
Perhaps this could be reduced to a few tables only - but this is
even very depending on the transports. Once, I did this based on the
transports for 6-10 tables ...

But, you should reconcider your transport strategy !
btw: you can disable the "import all" button if you like as well ...

AND:
Please move your questions to the SDN :-)

Regards

Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de -
http://www.easymarketplace.de

--- In SAPoniSeries@yahoogroups.com, "githman3" <rgithens@...> wrote:
>
> Since go-live in July of 1999, we have always done our inports
> individually from the command line. Rightly or wrongly, that's the
way
> we were taught to do it. (I'm guessing part of that was because of
all
> the addtobuffers for multiple clients in DEV). We have recently
> upgraded to zero-interactive boxes and have been doing our imports
> through STMS. However, someone mistakenly did an import of the
queue
> instad of an individual request (effectively doing an import ALL).
> This has created a major mess so ...
>
> 1) Is there a recovery from this other than RMVJRNCHG? (a prospect
I
> am definitely not looking forward to)
> 2) Should we be doing import ALL on a regular basis? (like before
> every support package install)
>
> Thanks,
> Rick
>

Since go-live in July of 1999, we have always done our inports
individually from the command line. Rightly or wrongly, that's the way
we were taught to do it. (I'm guessing part of that was because of all
the addtobuffers for multiple clients in DEV). We have recently
upgraded to zero-interactive boxes and have been doing our imports
through STMS. However, someone mistakenly did an import of the queue
instad of an individual request (effectively doing an import ALL).
This has created a major mess so ...

1) Is there a recovery from this other than RMVJRNCHG? (a prospect I
am definitely not looking forward to)
2) Should we be doing import ALL on a regular basis? (like before
every support package install)

Thanks,
Rick

Hi member of this great SAP on iSeries Group!

We wanted to let you know that we are about to move this great group to the SAP
SDN. This is a new service of SAP that has similar features like the yahoo group
but adds several advantages.

A few of these advantages are the following ones:
- The threads are ordered "on a good basis" with "last update first" and the
threads are together => you get a lot more overview and can easily skip topics,
that you are not interested in
- You are part of the big SAP SDN Community
- You can REALLY search for old threads (in yahoo this seems often not to work
properly)
- SAP employees are watching and answering in these forums as well
- You are rewarded with "Forum Points" when you help to solve issues => you will
receive T-Shirts or similar stuff from SAP
- These forums are moderated by SAP => you can expect not to see SPAM in there
- You are just a mouse click away from additional SAP resources like developer
blogs, eLearning material, and a huge download area
- You can mark questions as solved so nobody has to read a whole thread just to
find out the problem is already solved
- Inside the SDN there are forums for all kinds of SAP related topics. It’s easy
to get in touch with experts from all these forums.

You can find more information on how to do this change at:
http://www.4soi.de/SDN-Forum.php

The corresponding SAP on iSeries group in the SDN is "SAP on DB2 UDB for i5/OS
(DB4)" which can be reached with the following link:
https://sdn.sap.com/irj/sdn/forum?forumID=186

The SAPoniSeries Group Admins

Volker Gueldenpfennig, Jan Stallkamp

I should know this but I don't. Is there a way to undo an unconfirmed
repair? A brief (I hope) history. Coworker was working on adding
another language to the instance using note 123235 and imported
SAPKL40B03. Unfortunately, that note overlaid a bunch of source that
had been updated with a later fix pack. Version management does NOT
show the previous versions. Is there a "neat" way to undo this or will
I have to go into each source member and export it and create my own
transport?

Thanks,
Rick

Chris,
      I have installed it and collected data at several customer sites.
The one that I have used is from IBIS.  I'll send you an overview
document.

Chris
--- In SAPoniSeries@yahoogroups.com, Chris L Land <cland8218@...> wrote:
>
> Hello All,
>
>   Anyone out there use RBE tool in 46b?  How do you get the tool? I
find very little info on this tool?
>
>   Thanks,
>   Chris
>
>
> [Non-text portions of this message have been removed]
>

Hi All!
Has anyone installed Vertex's new version that requires JAVA in their SAP
iSeries environmnet?

Cheers,
Diana Wetmore
832.867.7413

[Non-text portions of this message have been removed]

Help

Anyone have information on deleting user groups?

Thanks

Ron H. Rogers
SAP Basis Support
Karl Storz Endoscopy-America
Enterprise Technology Services
(310) 348-4257 Office
(310) 498-0807 Cell
rrogers@... <mailto:rrogers@...>





________________________________

From: SAPoniSeries@yahoogroups.com [mailto:SAPoniSeries@yahoogroups.com] On
Behalf Of Andre Koji Honma
Sent: Tuesday, February 27, 2007 8:50 AM
To: SAPoniSeries@yahoogroups.com
Subject: [SAPoniSeries] Re: Upgrading from 46C to ECC 6.0



I'd like to thank all you!

Kind Regards,

André

--- In SAPoniSeries@yahoogroups.com <mailto:SAPoniSeries%40yahoogroups.com> ,
"Andre Koji Honma"
<andre.honma@...> wrote:
>
> Hello group!
>
> Someone already made an upgrade from 46C to ECC6? How are the steps
for
> this upgrade?
>
> I think it is necessary to change EBCDIC kernel by ASCII kernel
first,
> is it right? What OS version I would use? And how about Unicode?
>
> Thanks for all!
>
> Best regards,
>
>
> André Koji Honma
> Support Analyst
> FUJIFILM da Amazônia Ltda.
>





[Non-text portions of this message have been removed]

I'd like to thank all you!

Kind Regards,

André

--- In SAPoniSeries@yahoogroups.com, "Andre Koji Honma"
<andre.honma@...> wrote:
>
> Hello group!
>
> Someone already made an upgrade from 46C to ECC6? How are the steps
for
> this upgrade?
>
> I think it is necessary to change EBCDIC kernel by ASCII kernel
first,
> is it right? What OS version I would use? And how about Unicode?
>
> Thanks for all!
>
> Best regards,
>
>
> André Koji Honma
> Support Analyst
> FUJIFILM da Amazônia Ltda.
>

Hi Andre

You need the following PTF for the INPLACE Conversion "PTF SI26719". This
PTF is availible for the V5R4.
Otherwise your conversion makes big trouble.

If you not plan a "INPLACE conversion" you must doing the "old way EXPORT
IMPORT".

Mit freundlichen Grüssen / With kind regards

Michael Klar
--------------------------------------------------------------------
IBM Global Technical  Services

Vulkanstr. 106 , Postfach
CH-8010 Zürich, Switzerland

Mobile:  +41  (0)79 367 13 60
E-Mail:   mkla@...



              "Andre Koji
              Honma"
              <andre.honma@fuji                                          To
              film.com.br>              SAPoniSeries@yahoogroups.com
              Sent by:                                                   cc
              SAPoniSeries@yaho
              ogroups.com                                           Subject
                                        [SAPoniSeries] Upgrading from 46C
                                        to ECC 6.0
              27.02.2007 15:03


              Please respond to
              SAPoniSeries@yaho
                 ogroups.com











  Hello group!

  Someone already made an upgrade from 46C to ECC6? How are the steps for
  this upgrade?

  I think it is necessary to change EBCDIC kernel by ASCII kernel first,
  is it right? What OS version I would use? And how about Unicode?

  Thanks for all!

  Best regards,

  André Koji Honma
  Support Analyst
  FUJIFILM da Amazônia Ltda.