It was nice meeting you all today and thanks for the tidbits on local places to find scrap electronics. For those interested in the diagnostics mode for the...
Hi all First of it was really nice to meet all of you. Its really refreshing to just listen to what everybody has accomplished and are doing. Alex I went on...
Greetings All, The RSSC meeting is to be held this Saturday at Cal State Fullerton. Jim Ubersetzig will start things off at 11:00 by giving us a class on ...
Thanks for reminding me, Bill. Last month, Ralph Irwin's wife dropped off his robot and a few other spare parts for us. The robot is really too much good stuff...
Hi, I got an email which mentioned the Open prosthetics project (openprosthetics.org). It is intended to be a site for open source design of prosthetic...
The April minutes are on the web site www.rssc.org, thanks to Derek for taking notes. The course material from Jeff Dunkers AI and Power Management classes ...
A student I am mentoring at the University where we have our RSSC meetings -- told me that the dean might have $5K to $10K funding for a robot soccer team. ...
On Saturday I presented ideas for a kit of parts that might be given to new members of the RSSC, to help them get started building a robot. Any ideas ? ...
Jim, I've poked around the web site and some of it's links and the Soccer contest sounds really interesting. This is the kind of contest I love. With only...
This sounds like a very good challenge I think we should seriously consider this. On this type of effort we must make a full hearted commitment so we need a...
Hi Jeff, I was looking at the the Matsushita motor. The specs on the encoder seem confusing. They say it has two channels with 100 and 4550 pulses. Seems...
Alex, I bought a pair of these motors from another outfit; at least they appear to be identical to what Jeff D. brought to the meeting. They use the same HP...
Jeff Shirley
bucky@...
Apr 17, 2006 4:27 pm
3631
Jeff, Do you know how many pulses per revolution of the output shaft? Thanks, Alex ... From: "Jeff Shirley" <bucky@...> To:...
Alex, No, sorry. All I can tell you is that it was more than the 2048 counts (512 pulses * 4) I get from the motors I use now. The Matsushitas are pretty ...
Jeff Shirley
bucky@...
Apr 17, 2006 8:57 pm
3633
Just wanted to drop in and say hi to everyone around here. And also wanted to say that if any of you guys feel like getting to know me bit better come over and...
savanna-terk511@...
Apr 18, 2006 6:26 pm
3634
I agree it is confusing. Yes, does have two channels. If memory serves me right I verified the 100 pulses per revolution. I wasn't able to figure out what...
Jeff, Now you want *organization* with your contests?! Boy, this group is getting way too political for me... 8o) Scott ________________________________ From:...
Jeff, Thanks, I'll be looking forward to your answer on the encoder. 100 pulses seems rather few though. Is that per revolution of the motor itself? or the...
Alex, Have you finished your list-of-moves function? If so, Timmy could do the contest by pure ded-reckoning. Scott ________________________________ From:...
Okay Alex I measured the motor today. Sorry about the delay, work has got me in a different time zone right now. I first set the motor speed to 100 RPM using...
I realized after sending this I had a mixed unit problem of seconds and minutes. So the final answer really is 100 RPM / 60 sec/min => 1.67 RPS, 7.66 KHz/ ...
Jeff, No sweat on the delay. I amazes me how you guys who have to work for a living get anything done at all. I think I understand your numbers, but let me...
Alex, For 12 volts you do get close to 50 RPM. I measured this motor at 9.99 volts (41.7 RPM) and at 15.01 volts (64.7 RPM). Assuming a linear interpolation ...
San Diego Robotics Society Meeting, Sat. May 6th, 2006 Timmy should do much better this month. Steve is working to get our Scorbot arms moving under remote...
SDRS Meeting Saturday, July 2nd, 2005, 1-4pm Fry's ElectronicsHas everyone seen the VEX kits yet? ... From: Mummert, Scott To: SDRS-List@yahoogroups.com Cc:...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
