... Aha, good point. The last one I did was webcast, if I remember right. I have emailed them and will post info here, although the talk will be a bit basic...
I’m looking for suggestions for a small MP3 player, most likely PCB based, to fit within a couple of small exhibits. Ideally looking for something active...
Try roguerobotics uMP3 ... From: Show-Control@yahoogroups.com [mailto:Show-Control@yahoogroups.com] On Behalf Of Jim Weir Sent: Tuesday, October 02, 2007 6:41...
Of course we have to suggest our products: Sd-10 (about the size of a 9v battery): http://www.gilderfluke.com/index.php? main_page=product_info&products_id=33 ...
Doug Mobley
doug@...
Oct 2, 2007 4:13 pm
12004
Hello! Not sure if you are also interested in Euro Products but this is what you are looking for: http://www.inout-digital.com/ Bye Harald MOCOM Communications...
Hello All, I am trying to use an RS422 device to communicate (transmit only) with a 2-wire half duplex RS485 network . Can anyone recommend a converter for ...
If the RS422 is transmit only how is the network half-duplex? RS422 voltages are broadly compatible with RS485 and RS485 receivers work with an RS422...
Try RESmith. The Guru of RS485. www.rs485.com Really nice guy to if you call him and talk (be prepared for a long conversation :) ). We have used some of...
Dan Jamele
danj@...
Oct 8, 2007 11:01 pm
12008
Team, Does anyone have the RS232 or IP control codes for Barco FLM series projectors? Any help would be much appreciated. Better yet, if someone has written an...
Mal Padgett
mal@...
Oct 16, 2007 6:24 am
12009
... I can send you the RS232 reference. Dorian Meid...
An update. The client wanted us to control the FLM with IP control, not RS232, so that narrowed the scope of our search. The list we received from Barco didn't...
Mal Padgett
mal@...
Oct 17, 2007 11:07 am
12011
Does anyone happen to have a list of the serial protocol/codes for a Sanyo PLC-XF46N projector? I am willing to bet they are similar for most of the Sanyo...
See below An important note is that when testing in Hyperterminal or something, you must type fast. There is a timeout in most of the commands. Not a problem...
Dan Jamele
danj@...
Oct 18, 2007 8:41 pm
12013
Out of curiosity, does a "power on" command make any sense? If the power is off there is no there there to receive the command. Now, a standby command could...
For this, creative use of copy and paste is called for. Bring up the list of commands below and use copy and paste to get the commands into (Eyuck) ...
"Power off" generally does mean standby, as the device has to watch for an IR signal to wake up. If you're lucky (or know to disable "energy saving mode" as...
I have a radio system in use which has serial control commands. Every operation dreamable is controllable via rs232, including power off. And yes its a real...
I forget what the actual command was; but, I do know of a computer that had an instruction that was documented to have no next instruction address. It caused...
... I always wondered what the programmer would put after the EXPLODE instruction. Infinite loop? Exit our of the OS? ... I've only executed the HCF (we...
... I presume these would also use the Darkness Emitting Arsenide Diodes (DEAD), one use listed was "exploded indicators on nuclear weapons". These came out...
... Works just fine with the projectors I'm working with now. Although it's probably more like a lamp on/off command. But who cares, that is all we really...
This guy is having a very bad day. With LDI coming up, let's hope all presenters are well backed up... http://www.liveleak.com/view?i=a2a_1192741838&p=1 ...
It was programmed in assembly. The detonate subroutine was documented with "Return: There is no return from this function." And, indeed, the subroutine had no...
From: "Dale Farmer" <dale@...> Sent: Friday, 2007, October 19 04:30 ... 1) 1/2 second places the warhead underground and damaged. 2) There really is...
Our annual Haunted Hotel, the /Gravesend Inn/, opens Thursday! We have some new rooms and effects this year, and have redone and polished a lot of the...
I got interviewed on NY1 about the Haunted Hotel! It's airing in NYC on NY1 for the next 24 hours or so, and there's a link to the site on my blog: ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
