I was looking at using an ESE NTP server to distribute non critical timecode in a venue, I have just found out that the time needs to contain the date data,...
Matt, hi Yes the Date is usually contined in the "User Bits"... This is a farly standard setup in most time code generators and display devices. ... From: Matt...
We did three interesing polls in February and they ended without much comment. Of course a maximum of 28 people actually voted... ;-) The results are here if...
The LDI Show Control Case Studies session is back! The session will be part of a one-day "Show Control Day", date tba, but sometime between November 20-22,...
Let's shoot for Friday or Saturday, November 20 or 21... ... [Non-text portions of this message have been removed]...
Ellen LAMPERT-GREAUX
elgreaux@...
Jun 9, 2009 9:14 pm
13761
The outcome, the two manufactures I spoke to, ESE and Masterclock show the date as 01/01/00 if the SMPTE input to the NTP server does not contain any Data Data...
I'm starting preliminary planning for a MIDI device that will have the IN and THROUGH connectors on short cables permanently attached to the device. Questions:...
... Despite conventional spelling elsewhere, in MIDI it is "THRU", not THROUGH. ... On devices all ports are female, while all cables are male. If you want...
Who's your intended user? What's the other end of this device? Is it an interface or a device that needs to be controlled by Midi? What's the form of the...
... Since this is a small device, I'm thinking of a male on the IN and a female on the THRU. That way it would plug directly into the previous device and then...
... Musicians ... Our DMX lighting controller ... Contained in a slightly larger than normal connector that plugs into our box (or into an extension cable and...
... I have to say I really hate when people build devices like that. The cable ends included always seem to be just "that much" too short or too long. At ...
John, Are previous versions of the case study sessions available in print anywhere? A sort of "Archive" as it were. Sandy ... From: John Huntington To:...
... Valuable input. The reason in this case for the cables is the device itself is small enough to fit in the connector hood and plug directly in. With panel...
Good question. There's nothing officially archived that I know of, but many of the past presenters are on this list and may have posted their presentations on...
... Well in that case I might just do a line lump kind of thing as well. If I understand correct this is a device that would plug into a MIDI Output correct?...
Well, I might be tempted to assume that your device, as the 'wild-card' to a musician, will be either the first thing in a Midi chain, or on it's own. And that...
... The point that has been made by Tom, Richard and others is simply, however, that the 'standard' for MIDI is female connectors for all connections (IN, OUT,...
I've created a Yahoo group to continue this discussion for anyone interested. http://groups.yahoo.com/group/Durand_Interstellar_Lighting/ -- Jerry Durand,...
Hi all, in particular the manufacturers out there. Does anybody use any embedded USB hubs on their products? If so what modules/chips? Google search isn't very...
There are a bunch of manufacturers who make them. Most will have reference designs. The ones I have come across are more or less self contained chips. I have...
... You don't need a hub, a USB device can declare multiple interfaces and use them simultaneously. There is an example of how to set up the descriptors for...
... I used one a year or so ago but don't remember off-hand what brand it was (my client specified the brand). No big deal, just follow the reference design...
Hello, as a musician, i'm interested in your (eventual) product, I am looking for something simple & inexpensive to control lights from a drum kit, and other...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
