You may want to try Sigma Services, Inc in Florida. Contact Russell Clark at 813-737-1904 www.sigmaservices.com Leslie A. Laurene ShowSys 1252 Okeechobee Rd. ...
Leslie Laurene
llaurene@...
Mar 1, 2004 3:36 pm
5116
Liquid CO2 is very tricky, requires specialized piping, solenoids and venting. It is not something you want to screw up. I have as one of the other members...
McBoyle, Doug
doug.mcboyle@...
Mar 1, 2004 5:36 pm
5117
Hi Folks, Somebody mentioned to me that there were wireless sensors available, which could broadcast the sensor voltage (0-5 volts) over RF. Is there a company...
For questions about Powerpoint, have a look in the FAQ at www.rdpslides.com. If the issue of the black frame isn't discussed there (and it sounds familiar...
Villem Teder
vteder@...
Mar 2, 2004 12:39 am
5119
Anyone have the RS232 protocol for Hitachi CP-X430 and CP-S318 projectors? Any help much appreciated. Martin...
Hi All, We have had a comment to a proposal claiming that ADTEC 1013j and ADTEC Soloist 2 video servers have problems with frame accurate video sync between ...
Any help with some library or macros regarding SysNet (A&H) and Crestron devices? Regards...
1khz
1khz@...
Mar 4, 2004 10:19 am
5123
Hi, Amazing - despite searching for a good 1/2 hour on the Hitachi web site I simply couldn't find this info - I must be stupid. Thanks so much Loren! Cheers, ...
... No, not stupid at all. Maybe just the first time you had done that site. I'd had the misfortune to have looked for PLC information there once, so knew...
I’ve acquired some 4 x 10A DMX512 dimmers that I intend to use in my house as part of an automated lighting system. Does anyone know of the simplest (read...
... well there can't really be that much to it really, since you can now get USB -> DMX interfaces that are no bigger than a plug - e.g. VXCO's DMXCreator from...
There are cheap USB-DMX convertors available (. If you are located in europe, take a look at www.cinetix.de. They make USB-DMX convertors that can be...
Hi Richard. ... If you only need to control a few channels or may be need to write your own application for needs a lighting console does not fit, peperoni ...
Dear James, For low cost DMX lighting Control using a PC - check out _http://www.soundlight.de/_ (http://www.soundlight.de/) Their USBDMX2 Interface costs...
... Hi James, We have a USB version of our RS232-DMX512 box, price is $125US. Works just like the RS232 one, using a virtual com port driver. Jason Kyle JPK...
Jason Kyle
lists2@...
Mar 10, 2004 12:19 am
5133
Hello All, While there are a few posts around about dmx and pc control. I would like a question. Does anyone know of a usb to parallel port device that will...
Robert McRostie
robertmc@...
Mar 10, 2004 10:44 am
5134
Hay Squid, Check out http://www.mcmaster.com/ and search for wireless sensors, I haven't used them but they look like what your taking about, with some good...
It would be interesting to know if this can be done. Having written a driver to control the DMX Dongle, the way you have to fiddle the parallel port isn't all...
... Best approach here would be to simulate a parallel port, essentially making a virtual DMX dongle, then fire off the data to the USB parallel port without...
Jason Kyle
lists2@...
Mar 10, 2004 7:24 pm
5137
One thing I did try was buying a number of different usb to parallel port devices. But none of them worked. I was not totally surprised but I was hopeful due...
Robert McRostie
robertmc@...
Mar 11, 2004 3:09 am
5138
... To: <Show-Control@yahoogroups.com> Sent: Thursday, March 11, 2004 3:08 AM Subject: RE: [Show-Control] Q: Parallel port DMX devices and new notebook usb... ...
... The problem lays in the Windows Parallel Port Driver, because it does not support an abstract interface for reading and writing data, control and status ...
... I have not seen any usb-interface, that gives me information about breaktime, mab and others from a frame it received. Only the startcode and the values....
... You are right - this would probably require extra firmware within the USB/DMX converter and depending on the architecture, might not be possible at all. ...
what about those DMX - ethernet protocol units? I know it has to be stuffed into ackets but are any of those reasonable? Likely much easier to write an app...
Peter Kennard
peterk@...
Mar 11, 2004 2:59 pm
5143
That is what it really boils down too. I want to have 'tester' that displays all the dmx info and all 512 channels on the computer screen in real time at the...
Robert McRostie
robertmc@...
Mar 11, 2004 3:21 pm
5144
... If it uses ArtNet, it is the same as with the standard dmx-interfaces. ArtNet does not inform you about the breaktime, because ArtInput does not supply a...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
