I'm shooting video with my twin Canon A720s. I convert the files to AVI in Virtual Dub, then bring them into SMM. I'm using auto pano for alignment. After...
fyi a pic I took today of my 9 camera TX1 rig -- I will put a couple more on soon showing how it works more clearly -- it is made from square aluminium tube...
Yes, it's me. :-) As a rule, I proceed one stereo-pair in one working day. It's not easy job. It's good for unique stereo-pairs, not for line production of 3D...
That was the good news... It has a minimum base of 33mm, and a standard base of 61mm is about what my eyes and RBT S1. I also made two holes that are enough...
After much deliberation and advice from this group I have decided to buy a slide bar and practice on still objects before deciding which rig to contruct. I...
Sorry Evgenia for my stupidity but i am not sure what you mean. Are you saying that each lens should be 2cm diameter and that there should be two cm between...
2cm between each lens.the closer each lens is to one another the better.but there's a limit how close one can get with consumer cameras becuase of the camera...
... Sorry to hear that, Grant. The slightest impediment to the lens moving-out will cause that. With the power-on button pressed and some careful prodding of...
Thanks. I did find a site that showed the TX-1 dismantled. It had pictures so I can tape each screw to its location (They are all different I'm told). ...
... So, the lens is not stuck, it implies that one of the sensors on the lens assembly is not giving the appropriate signal. Maybe a 'lens fully-extended'...
It dawns on me that watching two 30 fps streams, one for each eye, shot out-of-phase and presented at 60 Hz, is exactly the same as watching NTSC video with...
Thank you Allan for looking into this! I undertand that if I tried to show out of phase video shot at 30fps at 120hz, there would be no way to do it: I would...
... Hmmm. If you had the 2 30fps streams, made with short exposure times and shifted by 1/60 sec, then if you laced these together with alternating frames and...
I am going ton sell my current SDM rig, which is two Canon SD1100is cameras (one pink, one silver), each outfitted with battery and SD memory card with...
Sorry, I must to say: 2 cm between the center of lenses. So 2cm lens + 0cm gap + 2cm lens + 0cm gap... Total stereo base will be about 20 cm (10-12 cameras)....
... Because with the 3D version, 1/2 of the time one eye sees no image - just darkness. This causes the annoying flicker, and it's more annoying the brighter...
I'm looking at building a system similar to the one described at: http://3dbruce.blogspot.com/ I would like to directly wire two SD1000 cameras so that I can...
I did like the look of the canon sx200is. Looks like a nice big fat lens and 12mp. I was recommended the TX1 by several people because of its width but it is...
... It is not supported by the normal SDM code but I have just helped someone do a similar thing with another camera. It is not much work so I can tell you how...
I regularly work at 3x4' for lenticulars and I can tell you that resolution is much less of an issue than it is for single images or even stereo pairs. By the...
Canon TX1 is not sold in Russia too. :-( 7 megapixels - great resolution. 29 mm width. It's ideal for the lenticular rig. This camera is not produced more....
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
