Dan, I have kevins parts just about finished up after 6 1/2 weeks of backlogged work. (We were down 2 mills). Your axles should be done Thursday. What a pain...
Ted, Cool! I know you probaly just want to get that stuff off your list. Kevin will be thrilled to get his treads, I know he's been anxiously waiting. I sure...
Sumo11 users, I just got the new boards in. On these Rev.2.1 boards I've addressed the power glitch issue when using the GM motors from solarbotics. I also...
Excellent, I will get one when I can. It would be nice to have the latest PCB. What was the problem with the old board? Can it be fixed on the old ones too? ...
Hi I'm presently trying to use a 68hc811E2 instead of the 68hc11A1 to be able to use a programme. For me to be able to do so I would need the memory map of the...
DAn Gates can correct me if I'm wrong but the Sumo11 was built to match the handyboard. Its memory map should be the same. Here's alink to the memory map...
Larry, You are correct, for the most part the Handyboards memory map is the same as the Sumo11, there are a few minor diferences in the periferal part of the...
Danny, Your package is outbound and you should have it by tomorrow. 1 Motor 2 Seriously cool stainless steel adapter shafts. Call me for the tracking number...
We are an academic research group of National Kaohsiung First University of Science and Technology in TAIWAN. To do research of knowledge management in...
Hi everyone, I am new to this group, in fact, my sumo11 is still in the mail. I would like to program my new robot in Logo language. As I understand, Fred...
I wasn't aware of the Logo Language, can you give us a link? I will run some tests on it to see how compatible it is. The Sumo11 is almost identical to the...
Dan, The Fred Martin project that uses logo is the cricket. it is on the handyboard page, but it is not HC11 based. it uses a PIC controller with LOGO burned...
I just complete assembly of the Sumo11 main board. Its working fine and has a lot of nice features. I would like to eliminate the pesky 9 volt battery and...
Rik, A 7.2v nicad pack is acceptable for both the main supply and the servo supply. The 5 volt regulator that supplies the electronics needs about one and a...
Dan, Are you using just the motors, or running modified servos? I ran some tests on servo motors and found that the speed doesn't increase much above an...
Notice to everyone. Advanced Robot Designs will be shipping anything that has been ordered shortly. Ted is in the hospital and had a quad by-pass surgery. ...
Just why DO you have a buffalo in your microcontroller, anyway? PDXbot.04 online registration is now open! Circle June 6 on your calendar. The Portland Area...
Hey, I just finished updating my homepage with my Fire Fighting Machine-PYRO. It's controlled by a SUMO11 board,has 6 sensors for line tracking(due to...
Cool Site Gerry! The photo on the front page is off to the top of the page and partly missing, but the info on the site is great! Thanks for the plug for the...
Thank you Dan, Don't know why the pics are off.I designed the site for a 10248768 resolution,maybe thats the problem. I'll check it out. I'll upload the main...
I just recieved word that John Myszkowski, writer of the Cutting Edge collumn in Servo Magazine, suddenly passed away on April 27th, 2004. He was very active...
So sorry to hear about John's passing. I only knew him from his column in Servo magazine and from the occasional email exchange in which he was always very...
Dear Robot Builders, My name is Thomas J. Burick and I am President and Founder of White Box Robotics. As you may know, White Box Robotics is a manufacturer of...
If I am using the expansion board, can I still use the Sharp sensor ports or must I use the analog ports on the expansion board? Now that I am thinking about...
... Yes on both accounts, the physical connection is not disrupted when the expansion board is installed. Just don't use both the expansion and the main...
I added this question and the response to the FAQ page of the 1sorc.com site. The FAQ page is located under the Main Board/documentation and the Expansion...
I've uploaded the latest patch file for the Sumo11 to work with the new version of IC. This will hopefully be the last time I have to make a patch file, we're...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
