For those who don't mind obtaining some of their own parts for the expansion board, I have them now. I don't have the extra $$'s to stock all the components...
Randy, The expansion board adds the following capabilities: 4 servo ports (can be hacked to get 8) 32K of non-volitile RAM 8 digital inputs 1 digital output 1...
Hi Dan, I would like to get four (4) of these boards, maybe more. PLease send me price for bare boards or kits (if available) Thanks, John Myszkowski... ... ...
John, The price for the bare boards is $10 each plus shipping/handling, the price for partial kits is $40 each plus S/H. Partial kits need the following from...
I need to make a correction to this list, I wasn't considering the LCD screen as part of the expansion board. I will not be able to supply them either for...
I am taking orders for the revision 2.0 Main boards. All previously known errors from the proto boards have been corrected and I've added a pin jumper so you...
Hi guys. is there a special way on how to connect the borad to download IC. I'm having problems doing it. It goes all the way until 100% and the gives me a...
besides the IC problem I'm also having other problem, when I try to download a program to the board it gives me a error eeprom. Any thoughts, is my chip...
Jose`, I need more details, are you loading IC onto the fully expanded board setup? Make sure that the serial connector isn't touching the little start button,...
Well I've tried with the Xboard and did not work, then tried the single board and neither, then I've tried to load a program to the single board using HCLoad...
Jose` There are several things to be considered here. The Sumo11 doesn't easily switch from expanded to single, (an issue that I did not forsee, but has been...
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Sumo11users group. File : /HC11...
Sumo11users@yahoogrou...
May 5, 2003 6:13 am
64
I have finished the programing to make IC4 completely compatible with the Sumo11 board. The zip file containing the sumo11 directory has been uploaded to the...
I've uploaded the new files necisary to work in the latest version of Interactive C, Version 4.21. Also included is the s11tests.ic for testing the functions...
I was looking through the messages and links section. Does someone have a like to where I can look at prices, etc? I'm in the process of updating the 68HC11...
Actually did some digging and found the price on the Bill of Materials at: http://www.sorobotics.org/sumo11.html I'll add the main link to the Links section. I...
I was just finishing up putting together the expansion board and came up with a few questions. I have the early ver. 1 of both boards 1. In "s" of the...
Mike, Good questions. I have been trying to get the website ready for the REV. 2.0 boards so here and there I've added things that only pertain to the new...
All, I've been playing around with interfacing my CMUcam to the Sumo11 board, it has been a real joy. I made a DB9 cable plugged it in and ran some of my old...
hi Dan, Just wanted to know what kind of serial cable do i use for the Sumo11(rev 1). Do i make one by , soldering pin to pin (all pins). If not what are the...
hi , How do i check the digital and analog ports wheni run the sum011 test program,to check each port. Can i give a digital signal using the board itself. bye,...
You can check both the digital and analog ports by connecting them to ground momentarily. The digital ports will go from 0 to 1 and the analog ports will go...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
