Happy New Year everyone! I found a software solution to my broken space bar (Model 4). There was an article in an old 80 Micro magazine for a keyboard filter...
Jan... Thank you very much for the good advice. As per your recommendations, I was able to do some research and found some instructions on video adjustments. ...
2 things, 1st is I had a 2KSX and I used a Samsung Syncmaster. It was a copy of the Nec Multisync, it was cheaper, and worked great! cga ega vga, mac... 2nd...
... There's no such thing as a 2000sx. You must have had a 1000sx. ... The MII and similar monitors could indeed sync to an analog signal, such as put out by a...
there was a memory board known as Evolution or something. I know nothing about it, and could even have been a modded Tandy board. The pile of 2000s I recently...
The boards used were so weird that you had to special make anything. Nothing from a PC would fit - or work. It was the same with the T1000 models that were all...
nearly all of the semi compatibles had a radically different (and usually superior) bus structure. AfAIK, only the TI PC could use IBM style boards, albeit...
Yes. Tandy was afraid to clone the PC directly so they made a "work alike" with enhancements, but since others cloned the PC down to the screws it was a wasted...
I am looking for more info on the Model 1 with a part number of "26- 1008" - Anyone ? If you search the internet you'll find two references. One is on...
Anybody interested in the 1000SX accelerator card? ... From: "Ed Nickl" <shelbycharger@...> To: <TRS-80@yahoogroups.com> Sent: Thursday, January 19,...
I just won my second Tandon TM-100-2 floppy drive on eBay and am planning on swapping out the existing 180k drives in my Model 4. Does anyone have any info...
Hallo, ... Drive :0 has to be jumpered as 0, drive :1 has to be jumpered as 1. If the drives come from IBM-compatibles, they are always jumpered as 1. ... No,...
Thanks, Jan! Very good directions. I think this will get me started. I will install this weekend. Matt Bothell, Washington, US ... Does ... work? ... If ... is...
I have an old Compaq with 3.5 drive, CDR drive and empty 5.25 bays, and I have some double-sided 5.25 drives. To transfer data from TRS-80 Mod 4 to a modern...
Bob Doerr
bdoerr@...
Jan 28, 2006 7:06 am
1102
Hallo, ... Alternative: install a 3.5" drive in the model 4. ... Of course, I don't know how you are/have been transferring data from the TRS-80 to the PC....
I should have been clearer. I copy the data from the LDOS-formatted 5.25 floppy to a MSDOS-formatted floppy on the 4P. I have often considered installing a 3.5...
Bob Doerr
bdoerr@...
Jan 28, 2006 1:34 pm
1104
Hi Since we discussed the use of supercross earlier, and I then found that there was no format selection that would work on 3.5" 720K floppies that would be...
I am not into emulators and the borrowed machine, the one that I use now, will not boot from the hard drive; I have DOS on the 3.5. Bob Doerr in the beautiful...
Bob Doerr
bdoerr@...
Jan 28, 2006 5:52 pm
1106
Hello ... I see, that might do it a bit more complicated, and I guess there is only one 3.5" drive. Can you use the harddisk for storage? I find that emulators...
Hallo, ... Using what software? ... That last statement is not correct. Why should it? A friend of mine has a full 3.5" 4P. I have a model 4 - functionally the...
Hallo, ... Supercross runs on the PC, or on the Model 4? ... I am formatting MS-DOS disks using the MS-utilities from CN-80 on my model 4P for years, thank...
Hallo ... On the Model 4. It can write and read loads of formats, CP/M several versions as well as MS-DOS (and many I don't know about) but it does only 5.25"...
Hallo again ... I never heard of this software before, the 'MS UTILITIES by David P. Miller $30.00' and I see it costs a bit which is probably why... anyway, ...
Hallo, ... [..] ... It can read and write files to and from MS-DOS disks. There is no file conversion. The target computer has to be able to convert, or...
I was about to ask where it was. bob -- billdeg@... wrote: It would help if I listed the URL http://vintagecomputer.net/tandy/trs80_1/aerocomp_DDC/ Using...
Hello with all, Sorry I speak French and I don't speak English, I use a translator on line. After I lost all my collection of old computer, books, accessory, ...
Hello ... I feel with you about the fire, real tragic. You will need to import the bas file to a vitual disk and run the file from basic under the dos. On the...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
