has anyone noticed these yet and has anyone stried it on a tandy smartdrive? I have a rlx 1000 and would be interested in any feedback. also has any one heard...
... Tandy Smart Drives are 8-bit IDE. As far as I know those adapters are 16-bit IDE. Sorry. ... No, but there were 16-bit ones. ... It *can't* be. MIDI uses...
I don't think one of those CF to IDE adapters will work...I dug into that thought myself. The problem is that a CF card is only compatible with 16-bit IDE....
... that ... enough about ... smartdrive? ... port one ... but is ... Thanks for ... through more resource and a reply from a manufacturer some of the adapters...
... Thing is, do we know that the Atari ST is 8-bit? I thought that was a 68000 based system? A list of adapters that'd work in the SmartDrive systems would be...
Hi, I just bought a Tandy 1000 TX which seems to work fine. However, I noticed that it is almost completely silent and doesn't appear to have a fan running. Is...
I can't say specifically but some models didn't have a fan and those that did had a small one. Most of these ran with about a 40W power supply. Neil ... I ... ...
... I ... have ... risk ... ======================================================================== THE ONLY FAN IN THAT MODEL WAS IN THE POWER SUPPLY if it...
... I can confirm that the only fan in the Tandy 1000 TX is in the power supply, at the back of the unit, and that the fan blades are clearly visible through...
... Hi folks. I thought I'd contribute my two cents worth. The fan in the TX power supply is really easy to get at. I got into my TX power supply just so I...
Thanks for the tips; at first I thought it might be acceptable to run a 286 without a fan, but apparently not. I installed a fan in it from an old Macintosh,...
Likely no damage done...or you'd probably know it by now (something would have failed). Wesley ... Thanks for the tips; at first I thought it might be...
... a 286 without a fan, but apparently not. I installed a fan in it from an old Macintosh, it seems to be working fine. Hopefully the previous owner didn't...
They all had fans in the case (most all anyway), but you are right - there wasn't enough heat dissipation to warrant a heatsink. I don't recall seeing ...
... There is a reason the fan pulls out through the power supply. You actually do get more cooling with it blowing out the back. Why? Because it goes through...
Wanted: Tandy Printer Connecting Cable This is a long shot! I've finally gotten to work on taking files off the floppy disks and find that the "printer...
On Wed, 18 Jun 2008 18:58:01 -0000, "batv44" <BATV@...> had a ... Remove the cover and you should be able to fix the ribbon cable connection. ... It uses...
Does this model have the flat edge card connector? Be aware that there are two printer cable types - those for Radio Shack printers and those for IBM PC...
... BATV Please consider getting an 8-bit ISA LPT-2 card. It, and the (used to be) standard printer cable together will not cost you as much as a custom shop's...
Mike, Excellent suggestion. That's exactly what I did when my cable went bad on my 1000SL years ago. The only down side is that (at least with the SL) you ...
Don't forget, Tandy's cable was the standard - it was IBM who screwed up all the ports with their bodged up clone of a Model I! Neil ... to ... Additionally, ...
Thank you Stephen, Neil, Mike and Wesley... I'm at the elementary level with some of my computer experience despite the fact that I've been using them for...
Neil, What was standard? The edge card connection, or the pin arrangement? Thanks, Wesley ... Don't forget, Tandy's cable was the standard - it was IBM who...
... Pin arrangement, as I recall. They also changed the gender of the serial connectors on the computer. -- Leonard Erickson (aka shadow) shadow at shadowgard...
The original standard was the card edge connector - used on the Model I/III/IV etc. The Model 2/16 series had a slightly fancier connector. IBM changed all...
... Though the question wasn't directed to me, I believe the D-shell connector was standard on the computer end. It's the Centronics standard for pin...
... About that program that would swap LPT ports, it was almost certainly swapping the ports in BIOS. In the BIOS data table which starts at address...
All: Been feeling nostalgic about my Tandy 600, and figuring of ways to put it to good use. I can't locate my manual or Utility Disk and would pay $$ to...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
