Those are really incredible images for film! Years ago, when Halley's Comet passed by, I got into film imaging with a f/4.5 16 inch newtonian that was the size...
Thanks Allen- I will try to work with it again tonight and try all com ports (had too many things going on last night to get into it. Do you know how the box ...
I don't have my IPAQ with me, but I will try to remember to check it when I run by the house after a while. If I forget jog my memory.I will check settings...
The 1/12th wave model has two internal threads a 72mm and a 65mm. This is the only model available. The new model has a compression ring adapter for the 2"...
1) The hand controller cord just plugs into the hand controller. Make sure that this is plugged in all of the way. 2) Hand guide. This will tell you quickly...
Gene Horr
genehorr@...
Feb 1, 2005 2:16 pm
26987
Randy one other point, don't know if what kind of hardware you have, but I had to connect the bluetooth dongle (the one that goes on the Temma side) to a...
Hello, I recently bought one of the refurbished LXD55 mounts as a light-to- medium mount for visual use. It came with a single 10-lb weight. My question is: is...
That weight will work just fine. Heck I use a barbell weight between two Tak weights. Regarding the 'scopes I'll bet you have the Borg mounted on top of the...
Gene Horr
genehorr@...
Feb 1, 2005 5:37 pm
26990
... This means that the Bluetooth's driver is mapping the port to COM8. That is, the COM port number is set by the OS/driver/hardware, not TheSky Pocket...
As Gene suggested, you might want to mount the OTAs side-by-side instead of piggyback. Mounting an OTA piggyback moves it farther from the axis of rotation,...
... Thanks, Gene. Do you have any retaining hardware to make sure the weight does not slip or mar the EM200 counterweight bar as Robin alluded to, or do the...
... from ... Thanks, Robin. I'm familiar with your tandem setup, I always thought I would need it later rather than sooner ;) ... The ... locking ... I have...
What is the message number of this photo. Art Ciampi ... From: billweir110 To: UncensoredTakGroup@yahoogroups.com Sent: Monday, January 31, 2005 11:54 AM ...
... I put a cloth between the counterweights so that it doesn't mar the counterweight paint. I haven't noticed any marks on the shaft itself. If you are going...
Gene Horr
genehorr@...
Feb 1, 2005 7:58 pm
26996
Thanks Gene, Doug George of Maxim looked at my tracking log and said I need to set the guide rate to 1x or slower. How do I set the guide rate on a Tak EM200...
I was told by Doug George of Maxim that my guiding problem may be that I need to set the guide rate to 1x or slower.....How does one do this on an EM200? Is it...
It's the high speed/low speed switch. If it is not set to low speed you will indeed be flying all over the place when guiding. The default guide rate when you...
Gene Horr
genehorr@...
Feb 1, 2005 8:35 pm
26999
I thought so!....Man I figured that switch issue out within a day of trying to calibrate for guiding. W So when it's on the HS side it's .9x. When it's on...
Nope <g>. High speed side is > 100X, low speed default is .9X. There's a key sequence which I don't remember off of the top of my head to lower the guide...
Gene Horr
genehorr@...
Feb 1, 2005 8:48 pm
27001
Look in the files section here for the EM200 manual, that should tell you everything you need to know. Jim K ... day of ... <genehorr@t...> ... to ... ...
The EM200 mount instructions on the files section of this group are quite outdated...does anyone know where more up to date version can be found? Thanks, Mark...
The 12th wave unit has an external 72mm thread and two internal threads. The older unit has the external 72mm thread, a 2.50 internal diameter and the...
I tried all the ports again but only get Error 55 (37). I think this is some how a setup problem. Is it supposed to be set as a modem for connecting or do you...
Hi, I have a FS60-C (the newer short model) and the SKY90 reducer. I want to connect them to my ST10XME with the CFW8A filter wheel. I have the filter wheel...
Randy, ... See: http://www.bisque.com/support/sbkb2/1078.asp for details about this error code. Daniel R. Bisque Software Bisque 912 12th St. Golden, CO 80401 ...
I have looked on my IPAQ and here are my settings. I have the accessibility as follows: check allow other devices to connect, and choose all devices. Check...
Daniel- I will try disabling active Sync if I can find a way to do so. Thanks Randy G. ... From: Daniel R. Bisque [mailto:daniel@...] Sent: Tuesday,...
I tried uploading a 100 KB file (EM200 Temma 2 manual info), but get a message saying there is no space available to upload. Thought this might be useful to...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
