actually it is a place they don't even kiss you during or after the act. <g> Herb On Nov 1, 2005, at 9:13 AM, Dean Jacobsen wrote: This must be a place to get...
Has anyone noticed when manually adjusting RA the drive does not engage immediately? At high power an object drifts nearly 1/2-way across the field. I have the...
It sounds like you are reversing direction and then the reduction gears are having to take up the slack. Remeshing the reduction gears will help a little but...
Hi, I have a bit specialized question and I hope someone will have the answer. My imaging setup is FSQ106 with Robofocus and ST-10. Last night I set up to ...
Unfortunately this is normal with 99% of the amateur telescopes out there. For what it is worth a refractor has the lowest effects from COTE (coefficient of...
Unfortunately, FSQ optics are very sensitive to temp changes. In my experience a 2 degree F drop in temp will require a minor focus adjustment inward to...
Hi: I have the Teegul SPII, and I haven't seen the problem you describe, so it just may be the gears aren't meshed well. I will have to take a look again at...
Hey Ron, Excellent images as always. I'm interested to know, what ISO setting were you using and did you use some kind of light pollution filter? I have a...
Hi, I have to concur with John about the FSQ focus stability. I have been using a FSQ/ST10 for 5 years and am very familiar with it. I found a indoor/outdoor...
Hi All, Is there anybody that is using an FSQ with a ST-2000? I currently have a Canon DSLR mounted to it. Soon, hopefully, the Canon will be off being...
The answer is yes. I was able to come to focus fine with the feldstein and st2000 cfw8 combo. Jim ... From: "astroimage2002" <b_rich@...> Date: Thu,...
Yes. That was my original setup. Works great. There is also just enough back focus for a fLi focuser if you need. I was very happy with the st2000 Fsq combo....
Jim, Thank you for the insight 8). I have become a little "backoffish" after using a Sky-90. EVERYTHING I did required a handfull of adapters. So far the FSQ...
Pawel, although I do not have an answer for you, I will soon be using the same setup. May I ask what you are using for the large step size? Thanks, Jim ... ...
Hi all, This is a follow-up on this thread: http://groups.yahoo.com/group/UncensoredTakGroup/message/32732 It is very nice and clear right now (I just packed...
Don't even try. I think that's a good direction. charlesbotkin <charlesbotkin@...> wrote: It looks like the objective may be pinched... I would check...
Your FSQ has a tilted element which causes the aberrations. It should be repaired. Art Ciampi ... From: eja24601 To: UncensoredTakGroup@yahoogroups.com Sent:...
I ended up selling the FCT-150 without the eyepieces. Make me a reasonable offer for the ones you want and I wont bother putting up an ad on astromart ...
Does anyone have any experience with the Tak Twin View along with the FSQ 106N? I have an opportunity to pick up a Tak Twin View, but if it won't work with an...
Hi Brian, Thanks for keeping me in mind! Since my first email, I've come up with a 7.5mm. I'd still like the 5mm and the 18mm. How does $240, total, sound...
i have both and they works fine. the twinview screws into the fsq (i don't know if that is a special adaptor becasue it came with it). my brain has issues...
My Mewlon 210 image train currently consists of an Optec IFW, TCF-S and ST8XE. Last night, I tried a Mewlon 210 reducer for the first time in the image train...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
