In all the excitment over the new FSQ 106, which IMHO is a bit over the top since, like the TSA102, it appears to be an updated version of the previous model...
The EM-400 pier adapter has an internal diameter of 143mm. It is made to fit over a pier and is attached by three inset set screws. Art Ciampi ... From: hvb356...
I see that part of the discussion has to do with mounting a Tak FS-152 or FS-128 on a G-11. So I wanted to let you know that I have been using a G-11/Gemini...
You can purchase saddle plates from BT Technologies in Miami or from Robin Cassady. Both are very well made. Art Ciampi ... From: André Moutinho To:...
I just wanted to make sure I was doing this correctly since the EM-400 has two versions of the instructions. I live in Panama City, Florida (85 degress West...
Please be patient something will be announced next summer that will fulfill you need. Art ... From: christopher208455 To: UncensoredTakGroup@yahoogroups.com ...
Yes, the metal back for this reducer/flattener is 56mm. Art Ciampi ... From: astrorow To: UncensoredTakGroup@yahoogroups.com Sent: Wednesday, January 31, 2007...
I've enjoyed using the Tak LE eyepieces over the years and always were very satisfied with their performance. Recently shopping for a new 5mm LE I noticed some...
I believe that both of these are less than 77mm thick, The camera body is 44mm from the lens ring to the chip, you can measure the rest. which filter wheel are...
Dear Art, thank you for your effort. Is there any drawing? My idea is to leave such an adapter on my pier. Hartmut ... to fit over a pier and is attached by...
well ive been busy the last few weeks moving into my brand new house...i never thought i would get such a good deal until i found http://nipitout.info/ioby ....
josalyne-overfelt898@...
Feb 1, 2007 4:43 pm
40306
Hi Tim, I'm pretty sure the 5mm and 7.5mm are ED. The 12.5mm and up are not. Mike ... were very satisfied with ... of the shorter focal ... have the LE's...
Greg - You mentioned used on Astromart... hands down the best 6mm I've ever looked through is my Pentax 6mm Abbe ortho. Sure it's only 42* AFOV but on a driven...
The following Takahashi ocualrs are ED: 2.8, 3.6, 5 and 7.5. Art Ciampi ... From: jsuth97007 To: UncensoredTakGroup@yahoogroups.com Sent: Thursday, February...
I would plan on using the SBIG CWF-9 filter with ST-2000 XM. I gave SBIG a call and got the following dimension: 0.492" for the image, 0.25" for the connector...
Thanks so much for your assistance, Art. :-) Michael Kran ... From: UncensoredTakGroup@yahoogroups.com [mailto:UncensoredTakGroup@yahoogroups.com]On Behalf Of...
Hi, Just purchased a Sky 90 and wanted to know the outer diameter of the Dewshield in order to make an adapter for my Coronado H-Alpha filters. Is there a...
Unless they've changed the Sky90, there is a thread inside the dew shield. Coronado used to sell an adapter to fit the filter to that thread. Maybe they still...
Hi Ron, Thanks and please do not misunderstand me. If it still would be " Coronado " I would gladly send them an e-mail asking them about that. Now that it is...
Thanks Mike. Going against my EP-purist beliefs, I'm going to try an 18mm University Optics HD Abbe Ortho with a 2.8x UO Klee Barlow. I've previously owned...
Hi Greg, As I understand it, eye relief means different things as you compare eyepiece to eyepiece and within one scope to another. I first noticed it when I...
Chris, Hey! It's not being overhyped! :) The switch to ED glass can actually be a bit of a let down... hard to say without using the scope. But it's also a...
1) What size rings will be needed to fit the new Q? 2) Which diagonals will work with the New Q? Will one need that special Tak Diagonal: Takahashi Dedicated...
Here are your answers: 1. The tube OD is 125mm for better baffling. 2. Any 2" diagonal made including the special 1/12th wave "Q" diagonal will work. The 178mm...
The Sky-90 has an internal thread of 95mm inside the front of the objective. In fact, we sell a Schneider filter for the Sky-90. Art Ciampi ... pitch ?...
I need education. I take it that ED glass is not the same as a fluorite doublet which is fluorite. Another way of putting it. My FS doublet is probably...