ok.... first of all.... hello to everyone... i just got a dell inspirion e1505 notebook.. everything is fine except for i cant seem to get the wireless file ...
You have to turn file and print sharing on the wifi network card _____ From: WRT54G@yahoogroups.com [mailto:WRT54G@yahoogroups.com] On Behalf Of simplebliss107...
lol... i need more credit then that... :) its turned on... from the laptop i can see my puter the laptop an my roommates puter... but cant access them. from...
Double-check that File and Print sharing is enabled on the Exceptions tab of your Windows Firewall control panel; if you're using a third-party firewall, look...
I've had a version 1 WRT54G for a couple years. It died this weekend. No activity, no indicator lights, no nothing. The power supply is still good. I...
The later ones like the version 5 and 6 run VXWARE, so it's harder to put something like DD-WRT on it. And they're also considered more unstable - I have a 5...
The WRT54GL is available from www.newegg.com. The price is very reasonable and works great, I have one running dd-wrt. -Alan Marshall ... From: Nelson...
Hey people. Whats up? Well I am pretty advanced here, but I have one problem I am fixing to run into. I dont know that there is anything I can do, but maybe...
You're probably SOL if you want to stay with the OEM firmware, but many of the third-party alternatives offer much greater scope in that regard. ... ...
1st is if you can run community modified firmware (version 4 and below for g and i think all gs - (www.dd-wrt.com, hyperwrt+thibor, openwrt) they have the...
I seem to have bricked my WRT when trying to load OpenWRT firmware. I have already created a JTAG interface for it - it works, but I can't get the firmware to...
Hey Dave, I believe this was the link that worked for me. http://www.linksysinfo.org/modules.php?name=Content&pa=showpage&pid=33 Also do a search something...
Set your nic to following setting before installing the linksys firmware. 10/HD 192.168.1.2 255.255.255.0 192.168.1.1 After setting your NIC you should have a...
I found I was having some connection problems and decided to change the DSL modem to "PPPOE On The Computer" and set the WRT54G to PPPOE connection. This time...
Hey, I don't know if you are interested but DD-WRT are alpha'ing a flavour of their IOS that supports multiple SSID's. Just downloading and testing it in the...
use the linksys auto updater which is easier. If it only flashes upto around 94% and hangs, get an earlier version. linksys site -->support-->downloads Any...
I looked on the Linksys site to no avail. The "auto updater" doesn't exist there - or I'm looking in the wrong place(s). I don't mind using the JTAG interface...
Hi, New to this group and a linux newbie......Currently have a home network using a wrt54gs. Is there any chance that I can connect to the www using this...
Hi Guys I am wishing to setup a point to point link between 2 buildings using the AP and Client Bridge settings. I will use WAP2 encryption, mac address...
Hi I am wishing to setup 2 identical WRT54GL with alternate firmware (DD WRT) for a point-to-point connection between 2 buildings. I am trying to cover about...
... One thing I might look at, is directional antennas, if they can't exchange radio signals with the AP, they can't connect. ... -- Brian Beattie LFS12947 |...
Reducing the possibility of intercepting the radio signal would increase the security. But, be aware that there is *NO POSSIBLE WAY* to guarantee the security...
... This is correct, in fact security is really a very difficult problem. For a while many believed that fiber was secure from tampering, because to read the...
Permit me a short anecdote: I was at one of the early Linux Expos, I think it was after the ones on the Duke campus, the first one at the convention center in ...
There have been articles published in some of the forums that you should not excede about 100mw or you may burn up the unit. From my point of view there is...
Hey IMPORTANT I got hardcopy of A+ CCNA and MCSE Anyone interested? The soft copies are at http://groups.yahoo.com/group/thacomputerguy If you’re interested...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
