I have alechemy firmware on my router and I installed a cpu fan because my chipset fans burned up(running 24-7 for a year). I was wondering if anyone would...
Ted, You could use a fanless cooling system mounted directly on the heat source or dump the CPU cooling fan and use some 12vdc muffin fans run at 5vdc. Also...
I have been running a WRT54G version 4 for about two years now. It has workked correctly until very recently. I started to get very poor response at times....
I'm using a wrt54g v5 (latest firmware update v1.00.9) to share DSL with my 2 neighbors. I would like to make their signal stronger. So I bought a 7dbi omni...
by the numbers you only gained 2 or 3 db which you could have also done by building a cardboard/aluminum foil parabolic reflector (if directional was...
Unfortunately it has to be Omni because my neighbors are on opposite sides. I'll look into a bigger omni. Thanks. Any further advice would be greatly...
Hi if you bougth an omni you shoud think in put over de roof or the hier place, because the RF must have good line of site, so try to do this and wil get...
I would get some lmr400 cable a bigger antenna mount it outside. that will do the trick. I run 2 flat antennas, 25ft lar400 on both ends shooting internet...
My teenage son has been informing me that our "internet connection sucks" since he frequently gets disconnected. I finally got him to explain the symptoms in...
I had the same problem here. I called linksys 4 times and got the right person. we done a Firmware Upgrade and clone the mac address on the problem computer,...
I would ditch the 2 units , and get a single WRT54G and I bet it would solve the problem and make the connections speed alot faster (killing 2 birds with 1...
Good point. I had to think for a minute about why I finished up with two devices. Previously I had a DSL modem/router and 5 port hub that was also interfaced...
It sounds to me like he's simply losing his wireless connection. Do you or you neighbors have a 2.4GHz cordless phone, perhaps? They can and will interfere...
My neigbour does have a cordless phone, I wll ask him what frequency it operates on. I'll look in to changing the WAP channel and see what happens. Thanks, ...
... Just to add to this. This morning while on-line on my own PC, I noted that my son's MSN IM "logged in", logged in twice actually within 30 minutes. I...
Andrew, I am assuming your are using DHCP? Try assigning a hard coded IP address to the WAP. Just a thought. ... -- William Estrada Email : MrUmunhum at...
Sorry for the spam people, this person has been banned. _____ From: WRT54G@yahoogroups.com [mailto:WRT54G@yahoogroups.com] On Behalf Of ADVANCED MOBILE DATA ...
I still have not got around to ditching the BEFSR41 and the WAP54G combo in favor of the WRT54G as folks suggested earlier in this thread. I don't know why,...
... There should be a setting in the configuration to tell it what time zone you're in. I can't recall what the Linksys boxes use by default, but I suspect...
Hello, if you use this setup, one WRT with a 14dBi antenna, what size of area could you cover, having in mind that your neighbours use wireless cards with...
Can you give more info. What is the exact model antenna and where will it be mounted. Where is your router in comparison to outside walls, what are they made...
Before I spent a bunch of money on a new antenna, I would give this free antenna booster a try. I would build two of these and put one on each antenna...
Im not sure that would work, AND I would like to know more about it! like would it be possible to define that everything send to a certain IP range would...
You may be right if you use the stock software. My experience is with DD-WRT and it allows you to both send and receive from both antenna in the dual antenna...
I have two WRT54G units. One is v2.2 w/ Alchemy pre7. The other unit is v3.0 w/ Talisman x. I have just added the v3.0. My goal is to station the unit in a ...