I have a similar this, but as you say, the comparison of frames is done by the hosting computer. see http://atc.lovethosetrains.com as I have place a camera in...
I am using a 15 Db omni antenna to cover a mobil and travel trailer court. For the most part it works well even inside a metal trailer. I have some dead...
... Although Bluetooth and Wirelesss (802.11b/g) share the same 2.4GHz band they are unfortunately incompatible. There are Bluetooth Routers available though,...
I've been thinking of the possibility modifying the WRT54G to include Bluetooth connectivity. Considering the WRT54G has Linux and if the Dual Serial Port Mod...
I was working on this. In North America, Linksys sells an OpenWRT-compatible wrtsl54gs that has a USB port. They don't have it in Europe so maybe not in...
... Thanks Trevor, I think I will try the dual serial port mod and use the serial to USB cable rather than importing a new router. Just wanted to know if it...
YOu know Bluetooth and 802.11 are different frequencies? So, its not... Darrin J. Calcutt, CEO, COO Canadian Locomotive Logistics Thanks to our sponsors for...
He's talking about using a Bluetooth adapter attached to a WRT in order to give it Bluetooth support, not trying to use the existing radio in the WRT to run...
I have two of Ringo Rangers and as far as I know it is fine tuned for vhf and not uhf, I was wondering since it could be fine tuned for a specific frequency...
The VHF and UHF frequencies are likely to be in the range of 146 MHZ (VHF) and 444.000 MHz (UHF). These are WAY different from frequencies in GigaHertz. To...
Thanks for the quick reply, Just a miser trying to recycle an old piece of equipment, but it seems that it would be a lot more wasteful to convert it, maybe...
Hi guys, I just went wireless everything is working great except after running all day I lose my ability to access the net, I have to unplug my router for...
DSL? Maybe have to set the keepalives for the PPOE. Regards, TJ Tryon, President Lighthouse Consulting Group 1118 Rutledge Court Noblesville, Indiana 46062 ...
... Hi Ron, I presume that is the standard Lynksys firmware. I understand that some of the early versions of this have a problem whereby if you run a p2p ...
Ron, Could your router be overheating? Where is it located? (Mine is in the attic.) Have you modified it in any way, including changing the antennas? Jim ... ...
Well its a weird problem, I returned it to the store and tried a new one, so far so good till last night it did the same thing it cuts out, then it hit me when...
If the phone in question is a 2.4GHz cordless, then yes, it will interfere since 802.11b/g uses the same part of the spectrum. Switch to a 900MHz or 5.8GHz...
Hi! I read some time ago in a hacker (Eric Raymond) documentation about WRT54G that the new firmware (VxWorks ?) introduces instabilities previously not found...
... Actually I've been using wrt54g since early v2 (VxWorks is v4 or v5 hardware where they reduced the size of the memory, don't remember off the top of my...
what causes the router to stop? wired and wireless... lights are still on and some are 'blinking' but cannot connect. using ver. 4.21.1 any assistance is...
I was able to install 3rd party firmware & my router is now stable. A simple websearch of wrt54g v4 firmware will allow you see what 3rd party firmware you can...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
