friends, please help trying to wireless broadband to my kids rooms using above equipment I can open the html set up so my pc is talking to the linksys it is...
If you remove the router and go from the cable modem directly to the PC in the kids' room, can you connect to the internet? _____ From: dylanwinter2001...
its all wireless my wife has banned cables at the moment I have the wireless link from my pc talking to the linksys box I can talk to the html browser on the...
Just curious do you have a WRT54G? If so have you upgraded it so you can turn up the power? That might help your floor problems another option is using...
In all honesty, you may need to connect a cable to it just temporarily for testing purposes. If you could verify that the wired connections all work, then you...
dylan- Could you give us a description of all the pieces of your home network? This is what I am seeing and i think i am wrong. dsl/cable modem router -->...
I'm having some trouble and haven't been able to figure it out. I have put together a mesh network of laptop nodes using OLSR which is running fine. Problem...
I currently have teh WRT54Gv2.0. Are there any difference between the different firmware firewall or is it all the same. I currently have a old sveasoft...
Hi all, I'm glad I found this group. I'm a newbie to linux but not a newbie to networking in general. Can anyone tell me if any of the firmware versions out...
The IPCop firewall distribution has bw shaping using Wondershaper. I think Sveasoft Satori also uses Wondershaper. IPCop needs its own dedicated x86 PC...
Thanks Haudy, Actually what I was trying to do was throttle the bandwidth for kazaa (i believe it's still port 1214). I don't intend to limit that port to the...
Well Satori (which has Wondershaper) is freely available, even from Sveasoft, right now. You can look at linksysinfo.org for a satori 4.0 download link. The...
last night i was talking to something from this group about the WRT54G router and i log into mind to see what version firmware i was running. After loging out...
I seen that some people have there wrt54g's setup as a webserver. I have the sveasoft loaded now(don't recall which version) but would like an addon that will...
Hello, I have a win2000 pro box running IIS for Internet printing. its working fine connected directly to cable modem, but when i put the router back in the...
I opened all the ports, and tried DMZ, no difference. I think its a error in NAT... based in what little I could find on the subject. yes i am trying to print...
In the router's options somewhere there's an option to block incoming pings/etc, i cant recall where, exactly, as i am not at home to see. Try turning that...
1) I'm looking for some smart WRT54Gers. I need them to help me write a large WRT54G help section for the site. So if you are or know someone quite smart...
Hi Group, I was wondering if there a easy to setup the hacked firmware on the linksys. Also, how to transfer the hack to the linksys box. Thanks, Ted ...
Found uploading the (good) firmware was as easy as: 1) Download Firmware_Satori-4.0G.zip 2) Unzip it. 3) Go to http://192.168.2.1 and use the webadmin...
follow this link http://www.wrt54g.com Check out your firmware options and do a little research to see what is best for you. You should be able to do a search...
I depends on how old your WRT54G is. The first hardware versions used a 5V power adapter instead of the 12V 1A power adapters used at the newer WRT54G's. Which...
i recently purchased a WRT54GS router, and i tried to upgrade the firmware from the OEM to the latest satori 4.0 firmware. i used the web-based router utility,...
... Mine did the same exact thing ~6-8 mos. ago. I posted problems to a mailing list but received little insight on the same issue you had had. I'm guessing...
Have no idea when this article was published: http://www.80211gnews.com/publications/page354-820046.asp -- Roger http://www.eskimo.com/~roger/index.html...