http://www.wideformatonline.com/content/view/243/39/ Anyone know any more about these new Canon printers? These new printers seem to imply that 1) Canon sees...
Pure speculation at this point of course, but the press release says "densitometer" and "calibration" neither of which imply the ability to create ICC...
Concerning the printers that do have them, does it allow for dry-down times before reading the target or do you have to do it immediately as part of the work...
... If you refer to the HP Z3100 and Z2100 there are two choices for profiling: printing and measuring done with several minutes drying time in between or you...
... The primary testing shows HP inks to last the longest on their substrate but the combo of ink/paper costs a fair amount. Epson has virtually eliminated...
I have a Canon 8000 (the 44") It replaced 2 Epson 9600's. I could not be any more pleased with my choice. The 8000 does not have the built in color reader. I...
On the HPs you cannot adjust the automatic drydown times for in-printer calibration. It ranges from 2 to 5 minutes (if I recall) depending on paper type...
Wouldn't this vary depending on humidity between HP's color teams environment and the consumers? Mark ... [Non-text portions of this message have been removed]...
Sure could. That's why the user manual has a set of both recommended and optimal temp and humidity ranges. Now if only more users would actually read this kind...
Anyone who have used their products for coating canvas ? I tried Tri-Art gloss acrylic medium instead of Lascaux acrylic varnish and I see no difference in the...
... I doubt the Z3100 driver (like any other "RGB" driver) will cope with third party media if there isn't a suitable HP media choice available to base the...
... My testing bears this out as well. On both the Hahnemühle and Innova matte papers and the FibaPrint stock, I got dEs of well .3 or less when comparing...
... Thomas, There is no other way than defining the print page length in the HP driver first, load the images on that page and after checking what is left...
... I think this should work based on what I read in the HP help for that "Remove top/bottom blank areas" feature. But load a black line first as well,...
Trial between two rolls. It works on the Qimage Edge marks too. Both with automatic cutter on and off. The last is nice when you want to stack more print pages...
Is anyone using a CIS or refillable cartridges for this printer. If so, are you having any operational problems with the (USA) auto reset chip? I want to buy...
I had a source in Texas for 44" wide printable film for dye ink. It was slightly milky/clear in color and printed very dense and sharp. Does anyone know that...
Okay Ernst, you PC lover, could you tell me from first hand experience if it would be to my advantage to upgrade my Athlon 2.2 GHz single processor to a...
Thanks for the link Mark. Interesting read, still don't know if I should upgrade to a 2 GHz dual Athlon ($80), or go for the 2.2 GHz dual $130. Maybe I will...
Will the chipset on your motherboard support a dual core? Be sure to check. T.O. ... From: sinar001 To: Wide_Inkjet_Printers@yahoogroups.com Sent: Wednesday,...
... John, been to Venice and Padova so a little late for a reply. My heart is still with Risc Os but it didn't really grow up so there's no love but more an...
Position Type Full time position Work Experience · Software Engineer (Must have 1 years experience) · Manager of Software Engineering (Nice to have 1-3...
Yes, my motherboard will support dual Athlons. I might wait a bit to see if prices drop this summer. Currently the price difference between X2 2.0 GHz and 2.2...
Does anyone know of any program, shareware or etc. that will rename image files by the date and time they were photographed? Forgive me for being a bit off...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
