A truck that have a tapering protrusion which is mounted on the back end of a truck is about two meters tail ends length has been shown to reduce fuel consumption about 7.5%.It has been verified by road tests conducted by the Dutch PART (Platform for Aerodynamic Road Transport) public-private partnership platform.Read more at http://earthalternate.blogspot.com/
Using renewable energy is one of the most important things that you can do as a
home owner. There are various advantages to using renewable energy at your home.
Using renewable energy can be something that can help both you (as an
individual) and the world (as a whole). There are various options that are
available to you as a home owner, when you use renewable energy.
The most common type of renewable energy is definitely solar energy. This energy
is used to create hot water at your home and it can also be used to generate
electricity by using photovoltaic cells. Although the energy conversion of solar
power to electricity has low efficiency, the cost of producing this energy is
much more lower than other forms of renewable energy.
The second type of renewable energy is wind energy. By using a residential wind
turbine system, you can reduce your electric bill considerably. The wind system
is constricted of a wind mill and a turbine. As the wind blows, the kinetic
energy of the wind is transformed into electricity via wind turbine. If the wind
is fast enough, then the residential system will produce enough electricity for
your home. If the wind speed is below the required amount, then the system will
be offline and you will use electricity from your local utility company.
However, in case the wind speed is high enough to produce more electricity then
you can use at that time, you can even sell that excess electricity to your
local utility company in most states.
For residential use, you can also use geothermal energy for your heating needs.
Although geothermal energy can not be used to produce electricity, it can be
used to efficiently heat your house. In some geothermal systems, it is even
possible to cool your house.
As you can see, using renewable energy can be very advantageous to provide
electricity to your home or to heat up your home. Although the initial costs of
your residential renewable energy system can be high, in 10 years or so, you
will have gotten back your initial investment and you will continue to save
money on your power bills. In addition, you can avail yourself of federal
incentives and most importantly your home will gain in value when you decide to
sell your home in the future.
Slash Your Power Bills by 80% Or Even Eliminate Them Completely -
http://powerforhome.key.to/
Novacell has introduced Novacell Portable Solar Charger that will able provide electric power for recharged your gadget batteries and is able to literally be put into your pockets because of its small and you can taken anywhere if you need it. Read more at http://earthalternate.blogspot.com/
Attempts to obtain clean and green energy to save the earth could be done in order to reduce footprints carbon.The International Air Transport Association (IATA) is committed to find a biofuel in 2010 for commercial aviation and will soon be realized.Read more at http://earthalternate.blogspot.com/
The first solar-powered plane will soon be on trial with the prototype in the water base near Zurich next week. Read more at http://earthalternate.blogspot.com/
It is just the same with efficient hydrogen production
and many other effective forms of energy. We could all be driving cars
running on tap water now but many people have been killed or threatened
with such by those who make huge profits from the energy industry.
Energy (oil gas electricity) is power and control and those who have
it are more powerful than governments and in fact own most ever
goverments in the world therefore run the world there way, this is why
they have nearly every country in the world in debt to the same group
of people who own the energy industry. A same group of people who do
not put there name on any businesses own more than half the industry in
the world and have a lot of control over those they dont own and there
ultimate goal is total world control. They own the pharmacuetical
industry almost totally most of the worlds steel industry coal industry
and now own most of the worlds service industries ie water sewerage
telecom and so on so they are very powerful.
You can build a motor generator that works and some work very well,
but if you put your hand up and make a lot of noise about it you may
find not every one is pleased about what you have done and if you try
to commercialise it they will put road block in your way, I would love
to see these technolegies used on a world wide scale as so many of the
worlds problems can be easily solved with them but some have already
tried and died in the process or been frightened off so this is why
very promising projects dissappear quickly after they surface. I know
of many that this has happened to here in New Zealand and it is noe
better in most other countries of the world.
This does not stop you from doing it for yourself your family and some
friends but if you want to go world wide you must know that there will
be serious opposition to your project, but if you can do it, go for
it you would get my encouragement and that of many others in this group.
All the best
Russ P.
alongaga wrote:
Hi Guys ;
If it is for real, it just blow my mind that this so great machine was
stopped from being put for further R&D and manufacture for the
great of human kind from people who are selfish. I just don't
understand why it cannot made it happen. I don't understand why we
should be afraid of the threat. Aren't this great machine should have a
fair share of fortune in the world?
best regards
Alongaga
--- In adamsmotor@yahoogroups.com,
Russel Prier <russelp@...> wrote:
>
> Hi Guys,
>
> Robert Adams had drawn up plans to do just this, I have seen those
> plans but he did not followthrough with them because at the time
several
> oil companies were watching him and had already made it plain to
him
> that there would be consequences if he was to hurt there industry.
Is
> it possible? Yes it is. The concept is very scalable although some
> people say it is not, as I have seen motor-generators that put out
> miniscule amouts of power and others that can put out a megawatt
or
> there abouts equivalent of energy and many in between sizes of
motors.
> The larger motor that Robert built was by no means the upper limit
as
> once you have some empirical formula worked out you could build
any size
> you wanted to.
>
> mac mac wrote:
> >
> >
> > ... Dear, person ... That would be the aim some members are
hoping to
> > achieve. Now ask yourself this, "what can I do with this idea
.. "
> >
> >
> >
> > On 6 Nov 2009, at 2:37 AM, Alongaga Jonos wrote:
> >
> >>
> >>
> >> Dear guys;
> >> I have a question. Does this machine can be use for
> >> powering an electric vehicles.
> >>
> >> regards
> >>
> >> Alongaga Jonos
> >>
> >
> >
> >
> > __________ Information from ESET Smart Security, version of
virus
> > signature database 4574 (20091104) __________
> >
> > The message was checked by ESET Smart Security.
> >
> > http://www.eset.com
>
__________ Information from ESET Smart Security, version of virus
signature database 4577 (20091105) __________
Now in every major supermarket in UK has been installed a network of electric car recharging points outside the stores.So that consumers can recharge their electric car while shopping. Read more at http://earthalternate.blogspot.com/
With energy prices on the rise, there are ways for the average household to cut
back on their energy bills when they need it most.
At the moment, the UK has committed to reducing the amount of energy we use by
60 per cent before 2050. This lofty goal is one that needs to see people across
the UK chipping in - and as energy bills climb there's more of an incentive to
save energy.
One solution to high energy bills is choosing to install insulation in your
home. Insulation helps keep heat in during the colder months, meaning you won't
have to use extra energy to warm your home. In addition, it helps keep rooms
cool during the summer, meaning you won't have to run your air conditioner or
cooling system as often.
Experts say that insulation is vital for many households when it comes to saving
money on energy bills during the credit crunch. Insulating your walls and in
your loft will help prevent air from escaping, and will also help you save money
along the way.
In addition to heating, bills are increasing because we use energy throughout
our homes and lives. When it comes to saving money, you can easily reduce your
energy bills by taking a close look at how you light your home. Using energy
efficient light bulbs, as well as remembering to turn off your lights when you
leave the room, are quick and easy ways to drastically reduce your energy costs.
Also be sure to close your curtains. This simple move helps save energy when you
shut them in the evening, as they help keep the heat in your home. When you
decide to buy new appliances, look for energy efficiency labels, and only run
appliances like dishwashers and laundry machines with full loads.
When it comes time to leave the house, there are still measures you can take in
the office and outside which can help reduce your energy consumption and bills.
Leave the car at home - using less petrol to drive to work saves you money when
you choose to take alternative transport like the bus or walking.
When you're at work, remember to switch off your computer and to only print what
you need. This saves you money in paper costs, ink and power spending.
With the cost of living set to rise during the recession, there are ways to
reduce your costs. As you can see, there are simple ways to save energy that
will allow you to save money - and the environment - through smart, easy
choices.
Create Electricity At Home: http://www.homeenergymi.tk/
Hi Guys ;
If it is for real, it just blow my mind that this so great machine was
stopped from being put for further R&D and manufacture for the great of human
kind from people who are selfish. I just don't understand why it cannot made it
happen. I don't understand why we should be afraid of the threat. Aren't this
great machine should have a fair share of fortune in the world?
best regards
Alongaga
--- In adamsmotor@yahoogroups.com, Russel Prier <russelp@...> wrote:
>
> Hi Guys,
>
> Robert Adams had drawn up plans to do just this, I have seen those
> plans but he did not followthrough with them because at the time several
> oil companies were watching him and had already made it plain to him
> that there would be consequences if he was to hurt there industry. Is
> it possible? Yes it is. The concept is very scalable although some
> people say it is not, as I have seen motor-generators that put out
> miniscule amouts of power and others that can put out a megawatt or
> there abouts equivalent of energy and many in between sizes of motors.
> The larger motor that Robert built was by no means the upper limit as
> once you have some empirical formula worked out you could build any size
> you wanted to.
>
> mac mac wrote:
> >
> >
> > ... Dear, person ... That would be the aim some members are hoping to
> > achieve. Now ask yourself this, "what can I do with this idea .. "
> >
> >
> >
> > On 6 Nov 2009, at 2:37 AM, Alongaga Jonos wrote:
> >
> >>
> >>
> >> Dear guys;
> >> I have a question. Does this machine can be use for
> >> powering an electric vehicles.
> >>
> >> regards
> >>
> >> Alongaga Jonos
> >>
> >
> >
> >
> > __________ Information from ESET Smart Security, version of virus
> > signature database 4574 (20091104) __________
> >
> > The message was checked by ESET Smart Security.
> >
> > http://www.eset.com
>
Robert Adams had drawn up plans to do just this, I have seen those
plans but he did not followthrough with them because at the time
several oil companies were watching him and had already made it plain
to him that there would be consequences if he was to hurt there
industry. Is it possible? Yes it is. The concept is very scalable
although some people say it is not, as I have seen motor-generators
that put out miniscule amouts of power and others that can put out a
megawatt or there abouts equivalent of energy and many in between sizes
of motors. The larger motor that Robert built was by no means the
upper limit as once you have some empirical formula worked out you
could build any size you wanted to.
mac mac wrote:
... Dear, person ... That would be the aim some members are
hoping to achieve. Now ask yourself this, "what can I do with
this idea .. "
On 6 Nov 2009, at 2:37 AM, Alongaga Jonos wrote:
Dear guys;
I have a question. Does this machine
can be use for powering an electric vehicles.
regards
Alongaga Jonos
__________ Information from ESET Smart Security, version of virus
signature database 4574 (20091104) __________
A creative idea can occur in any form in the search for alternative energy sources that eco friendly.Like about a successful bridge built by the bridge designer Tiago Barros and Jorge Pereira. The brigde called Cross-Wind Bridge, in Lisbon will light up the brigde in the night by itself.Read more at http://earthalternate.blogspot.com/
MFCs(Microbial Fuels Cells) batteries that work with bacteria and other microbes have been created by Harvard scientists working under the Lebone banner. Read more at http://earthalternate.blogspot.com/
Finally our dream to be able to make waste water into ethanol to fuel vehicle engines will soon be realized.Recently 2 companies,Qteros and Applied CleanTech (ACT)a recycling company commodity in israel have collaborated to utilize ACT's Recyllose-based feedstock,produced from urban waste water solids to further increase the efficient and low cost of produce ethanol. Read more at http://earthalternate.blogspot.com/
Plug-in vehicles containing a battery for energy storage. But as far as renewable energy no energy storage. We can do one thing: using electric cars and trucks to store energy from renewable energy. We can use intermittent renewables energy to our advantage. We can extent this green electricity to our home. A plug from car to house can power-up a house overnight. Read more at http://earthalternate.blogspot.com/
Superconductor materials have no electrical resistance and paves way for electrons to travel through them freely.A small amount of lithium if we add hydrogen, and if we keep the pressure on about a quarter of a pressure (hydrogen is converted to a metal) hydrogen is transformed into a metal with superconductivity properties. Read more at http://earthalternate.blogspot.com/
Making a home more energy-efficient will be worth the investment, especially
over time. Not only will you be doing your part for the environment, you could
save hundreds, even thousands of dollars on utility bills over the years you
stay in your home. And, an energy-efficient home is much easier to sell when the
time comes.
You might not want to just launch an effort to make your home more
energy-efficient in one fell swoop, but as you make repairs, do upgrades and
maybe do a little remodeling, the small additional costs will be recouped faster
than you might expect. After all, some of the things you can do to make your
home more energy efficient don't cost much at all, especially if you are
upgrading anyway.
For example, adding weather stripping to doors and windows will probably cost
you less than $50. You could save more than that in the next year in reduced
energy bills because your home is losing less heated or cooled air. Installing
window film on your east- and west-facing windows will probably cost you less
than $100 if you do it and less than $250 if you have a professional do the job.
It will reduce your heating and cooling bills and prevent fading of your carpet
and furniture caused by intense sunlight saving more than your investment in one
or 2 years.
Switching from incandescent light bulbs to compact fluorescent bulbs will cost
you a little more when you first buy the bulbs, but you will save on electricity
and you will replace the bulbs far less frequently.
Adding storm doors and windows will save on both heating and cooling costs by
reducing the amount of conditioned air that is lost and reducing the amount of
outside air that sneaks in. If your budget is tight, you can try doing what our
grandfathers did when they wanted storm windows - make you own storm windows.
You just need a little lumber, a few nails and some heavy plastic.
If you are replacing appliances, it is worth it to insist on energy-efficient
models and options, such as vent-free moisture sensing dryers, front loading
washers, and refrigerators with through-the-door ice and water. If you are
replacing a water heater, an attic fan or a heating/cooling system, you can
certainly buy replacements that are more energy-efficient. You might replace
your water heater with either instant water heaters or a solar water heater;
replace an electric attic fan with a solar-powered fan. Replace your heating and
cooling equipment with a single, energy-efficient heat pump. To really save, try
choosing a programmable zoned system with timers that allow you to control the
temperature in various parts of the house according to your family's needs.
Replacing a toilet? Choose a dual-flush toilet to save water usage.
When it is time to replace your roof, choose a metal roof for your replacement.
Metal roofs are less expensive and very energy-efficient. If you don't want a
metal roof, you can always install attic foil to prevent heat loss.
All of these options are great choices, both for the environment and for your
family. But don't forget to look for possible rebates and tax breaks.
Many utility companies offer rebates to customers who install energy-efficient
appliances and lights. Just give your utility company a call and ask. Then be
sure you understand the standards to qualify for the rebates.
If you install a whole-house voltage surge suppressor or disaster-proof
features, be sure to check with your insurance company to see if you will be
entitled to any reduction in your insurance rates.
Investigate energy-efficient financing for your upgrades if you are making your
home more energy-efficient. Check on FHA Energy-Efficient Mortgages, FHA Section
203(k) Rehabilitation Mortgage Insurance, etc.
And don't forget the opportunities to save on your taxes.
If you will use a remodeled or added room as a home office, be sure to deduct
the appropriate percentage of utilities, etc. each year as a business expense.
Get to know the U.S. Energy Policy Act of 2005. It allows homeowners to take tax
credits for remodeling that improves the energy efficiency of your primary
residence. The maximum credit you can take is $500, but you can take credits
for:
10% of cost up to $500 for energy-efficient exterior door or storm doors 10% of
cost up to $500 for a qualified metal roof 10% of cost up to $500 for adding
insulation expected to last at least 5 years $300 for qualified central air
conditioning, heat pumps or geothermal heat pumps up to $150 for a qualified
gas, oil or propane furnace or hot water boiler up to $300 for a qualified gas,
oil, propane or electric heat pump water heater up to $2,000 for solar water
heating
Making your home more energy-efficient can be good for the environment, good for
your family (and your wallet), and good for the resale value of your home. Do
your research and shop carefully when you are making upgrades in your home.
Going green will usually pay for itself within 5 to 10 years in reduced energy
bills.
Copyright 2007 by ABCD Publishing
Do It Yourself Solar Power under $200 - http://www.solardiy.tk/
The part I am seeking is a part that screws to the side of the rotor with three screws and fits over the drive shaft. It also has a screw that locks it in place on the drive shaft.
I am not quite sure what part you are talking about but
have always just used a litle epoxy glue to hold the rotor to the
shaft. Rick is selling parts and kits for a lot of the bedini stuff
now.
I dont see it here either but it may be part of one of these kits and
you could ask him if he has it.
Russ P.
fiditti wrote:
Bedini is using a keyed part that allows him to connect his magnet
holding disk/wheel/rotors to the drive shaft. The part is connected to
the disk via three bolts. Most of his spinning rotors utilize these
parts. I need to order some of these parts from McMasterCarr and don't
know what to call them. I'd appreciate it if you would give me the name
of the part. Thanks in advance!!
Regards,
Fiditti
__________ Information from ESET Smart Security, version of virus
signature database 4498 (20091011) __________
Bedini is using a keyed part that allows him to connect his magnet holding
disk/wheel/rotors to the drive shaft. The part is connected to the disk via
three bolts. Most of his spinning rotors utilize these parts. I need to order
some of these parts from McMasterCarr and don't know what to call them. I'd
appreciate it if you would give me the name of the part. Thanks in advance!!
Regards,
Fiditti
Robert Adams and Harold Aspen had a patent for a multi
rotor Motor Generator very similar to what we have just been looking
at. Harold filed the patent in the UK but the technology that would
make it work was Roberts and Harold had been so impressed with it he
came out to New Zealand and spent quite a bit of time with Robert and
went back to England and tried to rewrite the rules of physics but
no-one wants to listen. In the early 70s Harold published a couple of
books one was called "Physics without Eistein" and is a very
comprehensive and more accurate descriptoin of how things work the was
Einstiens Theory or Laws of physics. Robert claimed that he could
break every Law of Physics Einstien put up in his Laboratory in
Whakatane and that is proving to be the case with many recent
dicoveries in the world of physics laterly. Roberts Motor generators
did break nearly every existing Law of electricity and physics and it
takes quite a bit of thinking and looking at what they did you really
get your head arond the fantastic output to input ratio they operated
at.
DAVID FINE wrote:
Russel,
Thanks for your information on core winding. I appreciate it very much.
It sounds like these guys have three stationary disks with 5
electro-magnets each with three corresponding rotors with two permanent
magnets each. I haven't seen an Adam's motor with just two magnets on
a rotor before. Is this the way you read it? Thanks for your help.
Regards,
Fiditti
__________ Information from ESET Smart Security, version of virus
signature database 4491 (20091008) __________