Hello all, My towered A1200 recently developed a fault and started giving me a yellow screen. I went through the step by step process of removing all of the...
Does anyone have the instructions for installing the clock port A1200? I have purchased this item but have no manual. I installing into an A1200T with Z4...
... Unfortunately i can only remember the colours of screens that happen to me a bit so its not these: red = rom problem usually when softkicking green=chip...
... Yellow means the CPU caught an error before the guru system was started. Try cleaning the contacts on the CPU card. Cheers Neil -- Press any key to...
Hey Martin, ... AFAIK, yellow is for memory. Try cleaning the contacts on you accelerator and/or SIMMS. Have you nudged the case recently? The accelerator...
The general concensus seems to be that I should try some different memory, which I have, and to clean the contacts on the expansion board, which I will do. I...
... You've got a Viper board so you need to alter the jumpers on it to reflect the size of SIMM which is installed. You should have got some instructions with...
I having issues with x-surf working, says its unable to open Sana-ii device 'x-surf.device' unit 0. Does anyone have any ideas what may be causing this? I have...
... I had this once and found I needed to move the X-surf to another slot. Try without other cards to see of the .device opens, then add the other cards. ...
Hi, Does anyone know of an utility to repack lzx archives as lha archives? I searched around and only found lha -> lzx repackers. Thanks. -- [) /\ \/ ][ [)...
... You can always try making a script similar to this: makedir RAM:somename lzx x somename.lzx RAM:somename lha ar somename.lha RAM:somename (these options...
... Almost :) It's lha -r a somename.lha ... At least one of the archivers would inlcude the somename dir in the resulting archive, so it's probably better to...
Tried moving to diffent slots the machine either does not detect the multiface 3 card or refuses to boot by resetting itself. I have tried with just the...
I having problems with sound quality on my prelude, its making screetching sounds during playback with AHI. Does anyone know what my causing this.? Hardware ...
... That would suggest either a conflict with the cards or a hardware fault. ... Possibly, although I have these three cards in mine working OK. The order of...
Yep tried the below does not work. The buddha card keeps recycling the power on the machine if its in slot 3 or higher. I posted some help on the net and some...
... Even with no other cards inserted? That sounds like a Zorro busboard problem. The only other thing I can think of to try, is to remove the ROM from the...
Hello, its Philip of Amiga Flame This is the fifth year that Amiga Flame gives Amiga Gamers the opportunity to vote for the "Best Game of 2002". This year has...
Philip Cosby
philip@...
Jan 19, 2003 11:43 am
72656
Hello, its Philip of Amiga Flame Voting closed at 12pm on Saturday with the results counted it is now possible to present the Top 5 Amiga Games Of 2002. I...
Philip Cosby
philip@...
Jan 26, 2003 12:36 pm
72657
On 26-Jan-03, Philip Cosby said this about [afb] Top 5 Amiga Games Of 2002: PC> Voting closed at 12pm on Saturday with the results counted it is now PC>...
I have bought one of these cards but have no manual. I cannot get a CD-Rom to work in conjunction with the hard drive. I have set up termination correctly but...
Just to let anyone know that the problem i've been having with the x- surf not working is caused by the buddha card. The buddha card conflicts with the picasso...
Hi, What does it mean when i get this message in relation to the post below 'GVP 030 Combo + Scsi'. Sometimes workbench boots with this message and sometimes i...
The message i am getting is 'gvpscsi.device: unit 1' ' Unexpected Status $49/$46 ' Anyone know how to get rid of this? I can see my CD icon but this requester...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
