Hi again everyone & happy new year!,

Thanks for the replies. I am going to run up the latest version of
Asterisk and Dundi (Zaptel), will see I get on then.

Also I will disable echo and see how it goes. How exactly do you do this?

I will post my progress. Just wondering should be ably too upgrade the
box or just install the OS from scratch and then run up Asterisk
again. I am a bit of a NOOB when it comes to linux.

Cheers

Rich.



--- In asterisk-anz@yahoogroups.com, "Halomoan Chow" <halomoan@...> wrote:
>
> Hi Even I'm not in Australia, but my TDM400 works beautifully.
> First, make sure your line with analog phone.
> Second, disable all echo cancellation (TDM400 uses software echo
> cancellation with might have bug) to rule out the problem is not
caused by
> echo cancellation.
> Third, contact Digium for replacement card.
>
> Halomoan
>
> Halomoan
>
> On Tue, Jan 6, 2009 at 5:36 AM, Denis Hancock <denishancock@...>wrote:
>
> > Hi Richard,
> >
> > I've not experienced this problem but something off the cuff may
be an echo
> > cancellation problem ???
> > Generally though I dont have problems with these cards using the
latest
> > Trix setup
> > All The Best
> >
> >
> > TheMenace
> >
> >
> >
> >
> > ________________________________
> > From: Richard Lane <richardlane@...>
> > To: asterisk-anz@yahoogroups.com
> > Sent: Monday, 5 January, 2009 9:40:35 PM
> > Subject: [asterisk-anz] Audio Issues with TDM400P in Australia
> >
> >
> > Hi
> >
> > I posted the following message on the asterisk.org forums with no
> > replies so I thought I would post the message here to see if
anyone can
> > help me.
> >
> > I have a CentOS 5.2 box running asterisk 1.4.21.2 and zaptel
1.420-1. I
> > have a TDM400P PCI card with 1x FXS and 1x FXO. I have the system
> > configured in such a way that I can call from the FXS port to the FXO
> > which is plugged into my POTS from Telstra from provider. I also
have a
> > VOIP account using SIP and connect to CNET (collectors network) with
> > IAX2 and SIP.
> >
> > My issue I have noticed is when talking to some parties (generally
> > through the FXO port) the line goes quiet and then comes back to
normal
> > and then goes quiet again. I am not sure why this happening and it is
> > frustrating me somewhat.
> >
> > I wonder if the problem that I have is getting the zap drivers to set
> > the card to Australia mode. I have setup the /etc/modprobe.
d/zaptel file
> > to specify "options wctdm opermode=AUSTRALIA" but when I run ztcfg -vv
> > and look at the ports I have kewlstart configured on the ports but no
> > AUSTRALIA.
> >
> > In zaptel.conf I have configured loadzone=au and defaultzone= au and
> > fsoks=1 and fsxks=2.
> >
> > In the zapata.conf file in the asterisk directory I have setup normal
> > line options but nothing seems related to Australia.
> >
> > Anyone seen this before or can suggest something for me to try. I
would
> > greatly appreciate it.
> >
> > Cheers
> >
> > Rich
> >
> >
> >
> >
> > Stay connected to the people that matter most with a smarter
inbox.
> > Take a look http://au.docs.yahoo.com/mail/smarterinbox
> >
> > [Non-text portions of this message have been removed]
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>