Hi,

I have an issue where I don't seem to be able to dial mobile phones
from my Primary Rate service supplied by telstra.

I can dial any local numbers using 9 digits (73001xxxx) interstate I
have to dial 39415xxxx (no leading zero) and for mobiles I have tried
0417xxxxxx, 417xxxxxx, neither of which worked, just get back a
"Channel 1/1, span 1 got hangup request, cause 31".

Telstra claim that it is my equipment as the service is fully open,
so I am looking for some hints as to what I need to do to debug the
issue. I have googled around but not really found anything useful.

So I guess I might have 2 issues that might be related.
1. only having to dial 39415xxxx instead of 03 9415 xxxx
2. not being able to dial mobiles at all.

Any help greatly appreciated.
My environment is :-
Digium TE110p (the card I got on Bootcamp)
Centos 4.6
asterisk-1.4.18
zaptel-1.4.9
libpri-1.4.3

Zaptel.conf
span=1,1,0,ccs,hdb3,crc4
bchan=1-15
dchan=16
bchan=17-31
loadzone = au
defaultzone=au


Zapata.conf
;
; Zapata telephony interface
;
; Configuration file
;
; You need to restart Asterisk to re-configure the Zap channel
; CLI> reload chan_zap.so
;will reload the configuration file,
;but not all configuration options are
; re-configured during a reload.



[trunkgroups]
trunkgroup => 1,16
spanmap => 1,1,1

[channels]

context=inside

; Setup for the Primary rate card
echocancel=yes
echocancelwhenbridged=no
echotraining=yes
switchtype=EUROISDN
context=from_outside
signalling=pri_cpe
group=3
channel => 1-15
channel => 17-31
callerid=asrecieved
pridialplan=unknown
prilocaldialplan=unknown
overlapdial=yes

signalling=fxo_ls
rxwink=300; Atlas seems to use long (250ms) winks
hidecallerid=no
callwaiting=yes
restrictcid=no
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1

immediate=no

Relevant part of the dial plan
exten => _xxxxxxxxxx,1,noop(${EXTEN} --- ${CALLERID(num)})
exten => _xxxxxxxxxx,n,set(CALLERID(num)=73231${CALLERID(num)})
exten => _xxxxxxxxxx,n,dial(zap/g3/${EXTEN:-9})
exten => _[345]xxxxxxx,1,noop(${EXTEN} --- ${CALLERID(num)})
exten => _[345]xxxxxxx,n,set(CALLERID(num)=73231${CALLERID(num)})
exten => _[345]xxxxxxx,n,dial(zap/g3/7${EXTEN})