Hello all, Well, it's not often that the chance comes along to post the first message to a group, so here goes....... I'm located in Sydney and in the last few...
... Well I guess I'll go next. I use asterisk at home with a couple of softphones and a Sipura 3000. Currently using a combination of Freecall, Faktortel,...
I'm in the process of setting up a test server on a spare machine. I am using a couple of software/hardware SIP phones and a Cisco router for the PSTN...
Hi guys, I was thinking that I had this all sorted out. I setup my current linux box with *, buy a sipura-2000, connect up my dect cordless phone and join a...
Stace, There's 2 basic options - either buy a Sipura 3000 instead of the 2000 and plug the phone line into it, or put a X100P card in the Asterisk server. You...
Thanks Phil for the reply, I think I will go with option 2 and purchase the x100p card. Although I would expect now that if the power Goes down, so does my...
If you're using a cordless phone, you'll lose the phone when the power goes out anyway, regardless of how you connect the * box. If you do find a local...
Hi All, I have been buggerising withthis all night and I know it is something simple that I have missed. Basically from my * box I can call Firefly numbers and...
Hi guys, Having played with Broadsoft, and really liking it's web interface for setting up calls, address book etc etc, I began to wonder if anything like this...
Always leave an anologue phone plugged in parallel with your phone line, just as a backup. Maybe there is a relay that can switch your phone back to anologue ...
If you're using an X100P, you can plug in an analogue handset to the "phone" jack on it, and it will still be usable if the power goes out. Regards, Phil ... ...
Any idea on where to acquire an x100p card? I cannot seem to find any in Australia. _____ From: leopard1529 [mailto:leopard1529@...] Sent: Friday, 28...
There doesn't seem to be anywhere in Australia that sells them that I have found.... www.cuphone.com seems to sell something similar - although I'm not sure...
Hi everyone, I was wondering if anyone had any experience using both of these? I am currently using an X100P (for testing of course) and as predicted, the...
... The X100P has impedance fixed to that used in the US - 600ohms if I recall, and it can't be adjusted to suit Australian conditions (complex impedance,...
... The guys at ATP indicated to me that they were hoping for A-Tick by end of Feb. Cheers, Gavin -- Open Fusion P/L - Open Source Business Solutions [ Linux -...
Hi, I am new to Asterisk, Just setup Asterisk on Fedora box. No hardware/card setup yet on the box, I just want to test VOIP and I have both MITEL and Avaya IP...
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the asterisk-anz group. File :...
asterisk-anz@yahoogro...
Feb 2, 2005 10:37 pm
23
Through my travels across the big bad intarweb, I came across this: http://www.voip-info.org/wiki-Asterisk+Connecting+to+the+Cellular+Network It got me...
Nice idea, but what happens if you need to make more than one simultaneous mobile call? Is there a way you can 'program' the SIM into * so you can make ...
Jeffrey Morton
jeffrey.morton@...
Feb 6, 2005 9:00 pm
25
I think this looks like a very good option. AMP http://amp.coalescentsystems.ca/ ... for ... anything like...
Hi guys, I've just got an X100P card and thrown it into the machine, but I can't seem to make outgoing calls on it... When I try, I get the error: -- Executing...
When I added the following sip extensions on extensions.conf xten => 3,1,Dial(SIP/Phone3,20,tr) exten => 4,1,Dial(SIP/Phone4,20,tr) I got error message when I...
Try Exten => _5.,1,Dial(ZAP/1/${EXTEN}) This worked for myself _____ From: Steven Haigh [mailto:netwiz@...] Sent: Tuesday, 8 February 2005 11:57 PM To:...
Damn, I was beginning to think that this would never happen. I'm 27 already and until 6 months ago I didn't even have a girlfriend, and hadn't had one for at...
eric
ee6963c8f8391308247b2...
Feb 13, 2005 4:07 am
30
Hi , does any one know of any good PCI Basic Rate Interfaces for austraila to connect to asterisk ?...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
