G'day one and all, I now have my Panasonic system working behind our new TrixBox Server via a sangoma A102 over to our Onramp 10 service to telstra, everything...
I'm assuming the panasonic pbx is connected via PRI crossover to the Asterisk PBX which is then connected to Onramp. Might be worth checking that your clock...
Hi Joel, I'm very interested in the integration with Asterisk and the NEX XEN. I have a client that has one of these PBX's and I would like to integrate...
A question from a new Asterisk user: how do you adjust the call completion delay? We have had a couple of complaints from people at the "receiving" end of the...
I found a reference on the sangoma site as far as a master clock source on my B Span for the crossover to the PABX so I have enabled this, unfortunately it...
Adrian, All you need to do is ring your friendly NEC dealer and they can sell you a CO card. CO stands for central office; we also call them PSTN trunk cards. ...
Hello, my company is developing multiline (2, 4, 6, 8) Skype<->Asterisk Linux gateway. Is there commercial interest for such gateway? Regards, Roman Skvirsky...
Hi there, I'm an IT journalist doing some research into Open Source networking - Asterisk and hopefully Vyatta (open source routers). I found this forum via...
Hi guys, I am currently having troubles with our current voip setup. I am runing Asterisk 1.2.9.1 on a PBX that i have built, running Trixbox. The box is a P4...
Hi Dan, Have you first tried the fwd gateway? 1800 number. Its free, try that first to see if your getting the iax and the line quality. Then you can compare...
... I have tried the various numbers, and yes i can get out and make calls and recieve calls. The main problem is when we do make/recieve calls we get these...
You may want to look at what codecs your system and the attached phones are supporting. With another service providor I found that changing the actual codec...
First off let me say that I know this board is for Australia/New Zealand users, however, I have spent a lot of time on the trixbox.org and google looking for...
Howdi, I'm running two setups - a Faktortel account I'm about to retire, and an Internode 'NodePhone' service I'm lethargically swinging over to. I'm getting...
Jedd, ... The first issue with nodephone is that the password is separate from an ADSL service, so make sure that you are using the same password that you...
... I have Nodephone running via my Asterisk instance, as well as FWD and an internal VoIP arrangement. Internode will only use SIP, and have no intention of...
Andrew, Trevor, Thank you very much for your assistance -- shall have a play with those configurations this evening. Andrew - the inter-stuff would be handy, I...
... The Asterisk folks have this Dundi protocol, which is intended to provide this service - essentially, a distributed discovery service for phone numbers and...
SIP PBX has completely redesigned http://www.sippbx.info <http://www.sippbx.info/> Thier focus is geared toward providing free information on sip pbx systems...
I am currently building Trxibox to utilise in our company. I have been told that it should be possible to first setup the new box with our existing LG aria 16...
... All comments will be appreciated Ive gone a bit down that path. what I can add is that a good start is using a Sipura SPA-3000 to bridge the systems. I...
Hi List, Has anyone got a running asterisk connecting to pacific internet's voice service? (http://www.pacific.net.au/voice/vocal/) Im looking for config...
Yes I have. You need to use Asterisk 1.2.8 Brad ... From: Machon, Shane To: asterisk-anz@yahoogroups.com Sent: Thursday, September 14, 2006 8:41 AM Subject:...
Hi Brad, Im using asterisk 1.2.9, the changelog of 1.2.8 doesnt seem to mention anything regarding this. Can you post or email me offlist your asterisk...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
