Folks, after experiencing a fortunately-minor heart attack last Saturday that put me through two hospitals in five days, I want to reduce my unnecessary...
I wish a completely good recovery and good luck. We are going to missed you. rosarite ... From: Tom Becker <gtbecker@...> To: basicx@yahoogroups.com ...
Best of luck, Tom. Welcome to the world of "mostly lurking". Stop by and say "hey" once in a while. Thx for all your work over the years and, again, best of...
May God Bring you all you desire! To: basicx@yahoogroups.com From: rosarite@... Date: Sat, 5 Jul 2008 17:38:32 -0400 Subject: Re: [BasicX] With kind...
Hi Tom, Thanks for the wonderful contributions you have made to this group over the years. I hope and pray all goes well for you. Thanks and Regards, Ian P.S....
Tom, Thank you for your support of the BasicX group, you will be missed! I've been working on other projects at NetMedia and haven't been putting the time I...
Hello! ... I'm also trying to get the EB500 to work with the Basicx. I do have the led lighting up on the EB500 indicating a connection. This is what I found: ...
Digging through some old notes I found this graph that someone might find useful. http://tech.groups.yahoo.com/group/basicx/files/BX24/ BX24_TvsF.GIF Tom...
Hello, I would like to know what would be the best approach to switch a 2 to 3A, 24Vdc load on and off using the basicx 24. I have looked at a transistor but I...
Hi, You can use a mosfet transistor with a transistor between the BX 24 and the mosfet as isolation or like you said a relay but a solid state relay. You can...
Switch a relay coil using a transistor. Like here: http://www.wam.umd.edu/~toh/ElectroSim/relay.html ... [Non-text portions of this message have been removed]...
You may be right about using a relay. Short of using an amp to drive the correct transistor I was wondering if you could do the switching in the AC mode. I...
What is the load? Two or three Amps isn't difficult at all if it is a resistive load, a little more difficult if it is an inductive load. I PWM an 8-Amp 12v...
Thanks everyone for the input. I decided to go with a solid-state relay similar to the omron g3tc series. It is designed for microcontrollers. FlyerX...
Is there any advantage to swinging the gate with full supply voltage? I have a 600 volt 12 amp MOSFET that I'm driving with a 10V supply feeding a two...
I just recieved my BasicX-24 development kit and am having some problems setting the RTC. I've loaded the serial 2x16 LCD demo and it works great! The...
Greetings, This is my first post here so please be gentle. I'm trying to control my iRobot Create (www.irobot.com/create) with my BasicX BX-24 and I'm not...
Seems like you've done all the right things as far as the programming and troubleshooting go. One thing I can suggest is that you try sending a non-inverted...
Hello Is it possible to wait for 1min for keypress. And if the chip get a keypress on its input within 1minute then we have to jump to a location, else after...
According to schematics BX24P uses ATmega8535 chip, wich has hardware I2C support. I wonder, has anybody tried to use this interface from BasicX program? As I...
Hi all..This is Omair and I'm new here..I'm working on my final yr project and need the KXP74 Tri-axis 2 giga accelerometer by KIONIX..I've given them a mail...
Omair, BNB Optoelectronics of Korea sells the KIONIX 74 and will ship to you http://www.bnbopto.co.kr/contact_01.htm ... [Non-text portions of this message...
