Hey all, Does anyone have any advice on how to attach the cooper mask to the back of crows head? or any pictures of how to exactly position it on the back of...
Drill a hole in the center of the chinguard, and one in the back of the beak, and attach the mask with a short, heavy bolt and nut and two 1" washers. I used...
well i have my crow pin cut and im using a 1 inch piece of elastic for the beak. i havent glued the bottom on because im going to prime it first. I got me some...
On the show, Crow had two holes in the top of the beak, and two in the bottom, and the black elastic ran through those. Hooks may also work, though the vinyl...
great description. I was at my local hardware store today and noticed that the cpvc 1/2 inch t and the pvc 1/2 inch t are considerably different in size. I ...
Hi ya Group. Was wondering if our old friend Tom Seiler is still lurking in our midst. Tom if you still read this group. Could you plz email me privately? I...
I have drilled out one floralier tray, thinned out a 3/4 pvc to fit snuggly into the tray from the bottom up. My question is the bottom piece to crows neck is...
1/2" PVC won't fit inside 3/4" PVC. If you're going that route, you need CPVC instead. The PVC-only method is a 1/2" PVC running the whole length, no 3/4" ...
Ah yes, I recall that. Either way, for the more sophisticated internal construction, he'll have to ditch the PVC he has now and either use CPVC, or 200psi...
Here is what i did. I used a 3/4 pvc. I shaved this down so it fit into the floralier base snuggly. I took a 3/4 cpvc connector and cut it in half, and shaved...
I've started a new, almost completely useless page cataloguing Tom Servo's various heads seen on the show. This might be of some use to anyone who may be...
I think you did a really nice job on this Rob. There was a time, very briefly during season one that Servo had what looked like a Carousel "knock-off" for a...
... Ditto that. ... I think this non painted red dome also popped up on occasion during later seasons as well, although I may be confusing it with scary flesh...
Great job Rob, I have some pix at http://www.joecrow.com/servohead.htm that you can have if you want. I never published the page, but it is available through...
Thanks, Joe! These are great, I'll get them added soon. ... -- Rob http://rtf.phonelosers.org - personal page http://pod-six.net - all things "Sealab 2021" ...
I noticed the "stepped" bottoms on some of those dispensers. Were they used on the show, or are they just some new variation on the dispensers? Is that maybe...
Joe comes through again! Rob T Firefly <rtf@...> wrote: Thanks, Joe! These are great, I'll get them added soon. ... -- Rob http://rtf.phonelosers.org...
Actually I think the stepped dispensers are the originals The domes "unscrew" And I haven't seen any of them in a long, long time They pre-date the newer...
... It's the knock off dispenser. They're rather hard to find... I don't lurk ebay as much as I used to, but in the past 4 years, I've only seen 1... and it...
Hi everybody, There's a picture I created for our group and I wanted to know if you think it wold look good for the homepage. I think it will display better...
Here's a new and strange dispenser I just stumbled onto... http://www.target.com/gp/detail.html?asin=B00009Q9CN -- Rob http://rtf.phonelosers.org - personal...
That's cool! It's like the deluxe version! If ever anyone wanted to make a chrome-plated Tom Servo, that's a good place to start! Larry Rob T Firefly...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
