In a message dated 6/30/2004 12:18:30 PM Eastern Standard Time, botbuilders@yahoogroups.com writes: In case anyone is interested, I put up some photos of my...
Poor guy should have stuck with blenders. ... -- Rob http://rtf.phonelosers.org - personal page http://pod-six.net - all things "Sealab 2021" AIM: Rob T...
Joe, Charles here, the spring guy. I don't know if you got my e-mail but I need some Tom Parts. Drop me a line when you can so we can work out the details ...
I had really high interest rates on my home loan. I saved thousands of dollars on home payments. And you can too. Interest rates are as low as can be, And Yes...
In a message dated 7/11/2004 4:20:19 AM Eastern Daylight Time, pwjdi35js4@... writes: I had really high interest rates on my home loan. I did too......
sirmegagigan@...
Jul 11, 2004 3:03 pm
7156
At 11:03 AM 7/11/2004, you wrote: In a message dated 7/11/2004 4:20:19 AM Eastern Daylight Time, pwjdi35js4@... writes: I had really high interest rates...
All this Crow beak talk brings up an interesting point... Did it ever look to anyone else like sometimes Crow's beak was made of two seperate parts, rather...
It never looked like it was still attached. it wasn't still attached. If you unattached it, and put it slightly inside and back, it does look like it's too...
That's right -- always two pieces, the bottom part set in and back a couple of millimetres. This leaves a slight gap between the front 'teeth' when the jaw is...
Hello Bot Builders, Working on my first tom servo. I got his dome off, head leveled eye-hook installed. However, on my "test" head (the one I messed up before)...
i used a simple low volt drill and bored holes close together , then smacked it with a hammer. then sanded it smooth. did the trick...
chrsblck@...
Jul 21, 2004 1:22 am
7169
... THis seems like it'd cause a lot of friction, which will wear your string out a lot faster. A good way to poke the recommended hole in the beak, is with...
To make the hole in the back of the beak, I used an X-Acto knife with a long pointy blade -- turned the hole on one side until it just appeared on the other...
To cut the PVC-t, I cut a triangle out of the top with a hack saw and then gradually cut slivers off of each side to form more of a trapezoid. It took a while...
... Well, the bowling pin sorta looks like Crow.. only the wrong color.. and the floralier look like the one I have. Now lets see if anyone bids on it :). 5 to...
Actually... everything on that crow is dead on. Look at the auction it's a KTMA Crow, not a season 1 and above crow. The only thing wrong with it is the ...
sirmegagigan@...
Jul 26, 2004 5:54 pm
7177
I cant find it anywhere locally (Home Depot, Lowes, even the local paint store). Is there a reasonable substitute available? Thanks, Jeff...
... Krylon changed their "Safety Yellow" a few years ago. It's now an OSHA paint. Catalog says: R00439 – formerly 00439 – OSHA Safety Yellow – Matches...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
