Jon and Jerry, I do this all the time and it is really quite easy to do. Go to the materials.dat file in Chief's main folder, all the line types are stored in...
Thank you, I did it with good results!! Bill Shideler <billshideler@...> wrote:Jon and Jerry, I do this all the time and it is really quite easy to do....
Jon, I am glad I could help......And as usual, this is something I picked up from Tim O'D. 8^) Bill Shideler Homes By Design http://www.HomesByDesign.ws ...
Thanks guys Thought it might be a work around but just didn't have time to fiqure it out. I'll try that mike sound fairly easy. Thanks again Hans ... You just ...
I am not able to lower the "Starts At______ off default 1st flr" field in 9.5 Wall Specification Dialog. That is: the dimension defaults to "114" and will not...
Verified. Read below. Steps work, exactly as described. Andrew ... Sent: November 1, 2005 11:38 AM Subject: [betazens] Yahoo! groups and cookies A friend sent...
When placing a Bay or Bow window in a wall, the area of wall above and below the window displays the same material as the "main" wall of the house (in this...
If you have Spybot in the advance mode, you will get notifications of items being blocked everytime you log on to yahoo, wheter is yahoo or third party...
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the chief-users group. File : /CAD SYSTEM...
chief-users@yahoogrou...
Nov 1, 2005 7:41 pm
79596
Hi Folks Trying 10.0 again,,, quick question, I'm in plan view with show sheet enabled. Shouldn't I be able to select the sheet and move it or is this only...
Hey novice, get in CAD mode. ... East Bay Design 231.322.8702 www.eastbaydesign.net Hi Folks Trying 10.0 again,,, quick question, I'm in plan view with show...
Jim I tried that! Still no worky! I can select the sheet in layout but not in plan view in either mode. This is like starting all over again,,,,,,, :-( Novice ...
Ray in plan view I think the only thing you can do is center your floor plan on the drawing sheet when it is shown or you can hide the sheet if that is what...
Ray, not sure I understand the question, however, I don't think you can move the sheet in the drawing itself, if you mean arranging it on the screen. Kathy ......
Ray, The 'sheet' is on the 'default CAD layer. Make sure you have that layer turned on & unlocked. You can see the sheet even if you have that layer turned...
James, You don't need to be in cad mode to select the drawing sheet. Kathy, In plan mode, you can select the drawing sheet and drag it around your drawing. ...
Ray I guess you're right. I thought I remembered selecting the sheet in plan view and moving it,,, tired brain cells. I went so far as to give Chief a quick...
Glenn I've clicked on the sheet so many times my finger is getting tired! :-) Zoomed in, zoomed out, drawing mode, cad mode, tapped on the screen, kicked the...
Can someone with a HP 450c please help me with the settings, I can't select the roll function in the print driver and all it with let do in print on 8 1/2 x...
Terry Wittman
TERRYWITTMAN@...
Nov 1, 2005 9:34 pm
79607
Ray, I actually just tried it and it does work. Click on the edges of the drawing sheet, and it highlights with grips and a grab marker in the middle which...
Try it again, Ray. It CAN be selected!! Used to have to be in CAD mode, but now it doesn't matter what mode you're in. Did you check the 'default CAD layer'?...
Jim Geeeeees,, that was it Jim. The next sound you hear will be the cap coming off my bottle of Dewar's. ... Thanks everyone, still a novice Ray God Bless...
Tim I drew basically what you described and didn't have any problems. The stair connected to the porch at porch level which was lower than floor level 0. So,...
I used to be employed by a "Builder Bob".............He was a great guy and fun to work with, I really miss him. So, what is your name? Bill Shideler Homes By...
Living Area text keeps adding to it self over lapping on the layout. I think it's when I send the plan to layout then open and close it from the layout window...
Is there a way to calibrate the colour so the prints match what is seen on the screen. I am using a HP100 and the prints are darker with a faint hint of green....
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
