Sandy, get at least 8 switches, 10 will give you 2 spares in case you drop the unit and rip off a lever. I am now recommending 30 to 50 gf switches, 16 is too...
Found the following on their website under sales: Marquardt switches are components of finished products and must be replaced by the finished product...
All, Well frogged my way through the DFU and Bootloader stuff. Not too bad for a newbie. One misplaced file and an outdated device name, figured 'em out,...
John and others, I have seen the posts about hand held pointers. Apparently the Twiddler developers had concerns about response speed in the mouse pointer...
... ... 3. YouTube - Douglas Engelbart : The Mother of All Demos (1/9) "On December 9, 1968, Douglas C. Engelbart and the group of 17 researchers working with...
I'm not totally sure I understand the question Sandy. There is of course a mouse mode in my current code. It uses the same 7 keys as the keyboard. You toggle...
BTW, now that I think of it, unless you're particularly interested in playing with the game controller mode of chordite051.hex, you'll likely prefer...
All, Soldered on the adapters, tested for shorts with my trusted DMM916. It puts a max of 4-4.5 volts across a resistance, max current is 10 mA. Measured...
John, Thanks for the recommendation. Yes, I did desire the mouse to be active all the time. Or at least simultaneous with keyboard input, maybe a toggle...
Bummer. I'd try a hex reload anyway. Who knows. And just as another shot in the dark you might try adding about a 5 or 10K external pullup resistor on bit 3....
It's impractical to use the current Chordite mouse mode for editing. For example the key sequence to select and copy would look like this (you can find the...
Just started looking into this idea recently, and love it so far. Only drawback is I know next to nothing about electronics or programming. I currently don't...
Steelwolf, Hello! I was worried about the programming too, but it is not too bad. The AT90USBKEY is a nifty little board that can be programmed multiple times....
One point of confusion is sort of built into technical English usage. We use the word programming to mean (at least) two different things: (1) writing source...
I should say first we are a programmer who programs a program, then we use a programmer to program a programmable chip on a development (or demo) board. That's...
Well, typically it's clear from the context. A person programming is a person writing source code, while a device programming is a device applying the proper...
Just finished working my way through the archives. Just to establish a good starting point, am i correct in guessing that the instructions in the description...
The instructions in the group description are still current, with the single caution that the SS-01GL13-F switches mentioned in the referenced notes are now...
Thanks very much, will have to knock a few priorities out of the way before i can start this then, but hopefully i'll be back in touch before too long :)...
Ah, 370 seems to be one I wrote. Good thing I went to yahoo and checked. I have two arduinos hand have progressed only as far as making them blink LEDs. When...
Switches are $1-$2 each. Only a few of those listed could I find in small quantities. The AT90USBKEY is $30 Wire, connectors, a few $ each. One thought about...
A few days ago one of my keys stopped working so I replaced it only to find the new one didn't work either; the problem was in the wiring. I use 10-conductor...
It's out the side. I have no clips. It looked to me like it either comes out the side of the connector or it comes out the side of the clip so I didn't (&...
Very interesting http://www.iu.hio.no/~frodes/numpad.html For my own purposes, I think I'd like to see a one-handed version of this. Ideally I'd like to tie...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
