I've got some light guide from Maplin which I have been successfully using for TOSLink cables, using the blanking plugs from the transmitters and receivers....
428
rdmckee@...
May 15, 2001 11:13 pm
I have an AV310 Audio Excel Soundcard. When using midi I have no problem with output being received. I cannot get midi input from my YaYamaha keyboard to be...
429
Rich Hanson
richard@...
May 16, 2001 6:37 pm
On Tue, 15 May 2001 23:12:57 -0000, you banged out the following ... Not a helpful answer this, but I have a similar problem with my AV510 - it will receive...
430
Rich Hanson
richard@...
May 16, 2001 6:37 pm
On Sun, 06 May 2001 20:49:52 +0100, you banged out the following ... Well, I gave up looking and went out and bought a ready-made cable. -- Rich Hanson ...
431
Adrian Casper
adrian@...
May 16, 2001 7:25 pm
... I hope you found assembled fibre optic cable prices have come down since about a couple of years ago when these things were scarce and maplin light guide...
432
Rich Hanson
richard@...
May 16, 2001 7:38 pm
On Wed, 16 May 2001 20:31:26 +0100, you banged out the following ... This was a JVC one, bought from Currys for £12.99. You could get an IXOS brand for...
433
nixster@...
May 24, 2001 10:14 pm
... From the looks of the announcements on the C-Media site, some chips have been (illegally) re-marked as Yamaha. Nixster....
434
Mario Miljavac
mario.miljavac@...
May 26, 2001 3:17 pm
unsubscribe mario.miljavac@......
435
Tom Browne
Tbrowne@...
May 26, 2001 5:20 pm
http://www.dearhoney.idv.tw/SoundCard/CMI8338_8738/FakeYMF754/ Here you can see some pictures comparing the real thing (which AFAIK is pretty rare anyway,...
436
Tom Browne
Tbrowne@...
May 26, 2001 5:27 pm
http://home1.8d8d.com/Life/Club/subdanny.in2000.com/yam754.JPG Anyone who's seen an 8738 board will see this is almost straight copy of the reference design...
437
Adrian Casper
adrian@...
May 26, 2001 5:58 pm
Tom wrote - ... There are a lot of scams around which this one joins. The fools who have done this are somewhat dim thinking that this would pass off...
438
Pavel Král
p.kral@...
May 26, 2001 9:42 pm
unsubscribe p.kral@......
439
BrinDaNOiZe
BrinDaNOiZe@...
May 29, 2001 3:02 am
What's up all, I'm hoping one of you guys has the knowledge to help me out. I recently purchased an SPDIF Optical module from PCChips since I have a PCChips...
440
Francis Cheng
dmd_sg@...
May 29, 2001 3:05 am
Hi there.. Do you have the manual with you? I remembered reading something about adjusting some jumpers on the sound card to enable these optical outputs. Hope...
441
Reichenbach, Joerg (J...
jreichenbach@...
May 29, 2001 6:36 am
Hi there, if you're MoBo has an CMI chip on it you have to use the CMI drivers and the Mixer for Windows. If I remember it correctly there is some advanced...
442
rahim@...
May 29, 2001 8:58 am
I bought one of the above cards from Dabs.com (for about 12GBP including delivery) with the intention of using its S/PDIF output to pass both AC3 and normal...
443
Francis Cheng
dmd_sg@...
May 29, 2001 9:10 am
Hi Rahim.... You ought to have the latest driver and application. Get the latest from http://www.leadtek.com.tw/old/e4xsounddl.htm IT is using the 8738 chipset...
444
Stuart Gerber
stuart@...
May 29, 2001 3:42 pm
I recently tried to push a WAV file in 3 different programs through SPDIF OUT on the cmi8738 card for the first time since i switched to the working win2k...
445
BrinDaNOiZe
BrinDaNOiZe@...
May 29, 2001 3:48 pm
"From: Francis Cheng Hi there..Do you have the manual with you? I remembered reading something about adjusting some jumpers on the sound card to enable these...
446
Reichenbach, Joerg (J...
jreichenbach@...
May 30, 2001 6:33 am
... There are of course converter circuits from Coax SPDIF -> optical and the other way round... however if you buy them they're rather expensive... You can...
447
rahim@...
May 30, 2001 8:52 pm
Thanks for that. However, I tried installing those drivers (after removing the old ones) and then installed the applications (over the top of the old ones)...
448
Francis Cheng
dmd_sg@...
May 31, 2001 7:29 am
Hi Rahim I am using WinME... I found out that even the latest WinMe driver doesn't work for me. I have to use 6.13 win9x driver to resolve all problems. Maybe...
449
rahim@...
Jun 1, 2001 9:01 am
I presume you mean the WDM driver as the version numbers of the W9x driver don't go that high yet - I couldn't find the 6.13 version of the WDM driver but I...
450
Duncan Martin
duncan@...
Jul 7, 2001 8:19 pm
Hi all, Went to a fair in Stratford today and lots of people were selling Yamaha cards with 8738 chips. Don't know if this is the same 'scam' that Cmedia were...
451
Michael Decerbo
mdecerbo@...
Jul 11, 2001 10:20 pm
I'm not sure if this has been mentioned already, but the Zoltrix Nightingale Pro 6 seems to be available from inpax.com, at ...
453
kennethhos@...
Jul 14, 2001 10:21 am
Hi..... After many "years" of frustation I found this: http://www2.novac.co.jp/driver/r2000_drv.html It is some new drivers for the 8738 and now I have BOTH...
454
hankarhu@...
Jul 19, 2001 7:45 pm
Tom, and others, Sorry to return to this posting after a long time. However, this topic has been recently debated at ...
455
efom@...
Jul 21, 2001 3:28 am
Hi Everybody My name is Daniel and im from Barbacena, Brasil I have an onboard CMI-8338, and im trying to make it work under DOS, but im not getting sucess. I...
456
Tom Browne
Tbrowne@...
Jul 21, 2001 7:32 am
Have you tried the Midiman DIO2448 drivers? - Tom. ... From: <hankarhu@...> To: <cmi833X@yahoogroups.com> Sent: Thursday, July 19, 2001 8:44 PM ...
457
hankarhu@...
Jul 21, 2001 10:23 am
Tom, thanks for your message, yes I have tried. Windows (2000) reports that the driver functions properly, but this driver apparently isn't compatible with the...
