I have the rip for the color stylus 7880, and I purchased a 9900 in December 2008. There are lots of other rips out there to try, but nothing that has the...
... I don't have a 9900 (yet), but I know of someone using ImageNest (http://www.bluecubit.com/imagenest-large.html) and a ColorBurst RIP on the Mac....
Have a problem. I am getting on a black and white print, horizontal lighter areas on the right hand side of the print. The lines are about 8 inches from the...
Hey all! I've been using Imageprint 7 for 8 months now on a relatively new HP Vista64 system with Trend Micro antivirus. Just about every time I use...
I have imageprint on a mac printing to a Epson9600. when I print using the step/repeat feature the printing stops at about 20% any ideas out there why?...
I am using IP 8.0 on an Intel Mqc Pro with 16 Gb RAM, under Snow Leopard. My Epson 3800 printer is connected via Ethernet cable. Until recently, everything was...
Mike- Are you sure the IP address did not change during SL upgrade? If so, I would advise making the ip address a static one. You don't mention any socket...
Thanks Tom. I tried Socketfix, but no luck. Still get the error (but no socket error). The odd thing is IPprint has worked perfectly on Snow Leopard for the...
Mike, At the risk of offering up a standard tech support response, have you tried completely uninstalling IP8 and re-installing it? I was having problems...
This problem just started. Up to 4 days ago, I wasn't having the problem. I have tried rebooting the computer and the printer, removing and reinserting the key...
sounds like a mismatch in the IP settings and the printer actual... I would be sure all jobs are cancelled, then go through each setting one by one... I...
I tried this, but it didn't work. To make sure it wasn't the printer, I printed direct from another software and it printed with no problems, so it must be...
Hi Tom, I did as you suggested, but I still have the problem. I use this same software to print to another printer and have no problems at all. I also sent a...
Wendy, ImagePrint has been very kind to me when I've misplaced the encryption code and needed their help. Just give them a call. You may need to prove you are...
Wendy- I think you can just go to the Colorbyte web site and get a new encryption by entering your registered email address and the dongle number. tom...
I just got a new mac... came with osX 10.6 (software update to 10.6.1). Did the migration assistant to the new mac via firewire400-800 cable. Everything...
Image print is one of the few image apps that worked well for me on snow leopard. The socket problem is easily fixed. In the image print folder there is an app...
All of us have had the same problem. You may find using the socket fix applet works for you. When I contacted Colorbyte, they suggested the following: 1) Move...
I am printing on a 9800 and running 10 inch wide roll paper through the printer. Need to make 100 8x10 prints. So I figured I would run 10 inch paper roll...
Todd, What OS? Borderless? How do you have your printer configured? Eric Neilsen Eric Neilsen Photography 4101 Commerce Street, Suite 9 Dallas, TX 75226 ...
I've spent way more time than I should trying to read the help PDF. I know it's got to be a simple setting. I'll double all my cuts if I have to slice 100...
Snap to grid? What happens if you have the snap to grid function on? I am a few version back, but I'd start with that. I don't recall seeing your printer...
Seems to work the same, haven¹t had any issues yet. -- Best Regards Keith Douglas Keith Douglas Photography 730 Middle Street Suite A Ft. Lauderdale, FL 33312...
