Thanks but that's not installed, Office 2000 is, but it's not a new
installation.  It is so weird that it won't allow me to select
CorelPP.exe.  The closest I can get is AdobePhotoshop, but I prefer
CorelPhotoPaint for just quick edits and wish I didn't have to open that
program first to be able to use it.


  On Tue, 27 Oct 2009, Jan J. Kok
wrote:

JJK >>Could it be that you recently installed Office97 on your system? Or
JJK >>one of its programs, like Word97? Microsoft Photo Editor usualy
JJK >>came that way, bringing the default to open all jpg-files, unless you
JJK >>carefully avoided this. No need for an IT. Follow Lee's directions
JJK >>and it's all over, at least for the jpg-files. You probably also have to
JJK >>do the same for other kinds of graphic files, like tif- or pcx-files.
JJK >>
JJK >>Jan
JJK >>
JJK >>
JJK >>----- Original Message -----
JJK >>From: "Jenny Payne" <jpayne@...>
JJK >>To: <coreldraw@yahoogroups.com>
JJK >>Sent: Monday, October 26, 2009 7:25 PM
JJK >>Subject: Re: [coreldraw] default photo editor
JJK >>
JJK >>
JJK >>
JJK >>Thanks... yes, that would seem to be another way to do it.  But my
JJK >>computer (running XP) will not allow me to choose anything other than its
JJK >>own list of programs to open photos.  Which is odd, because PhotoPaint has
JJK >>been the default in the past.  I guess I need to get IT in here to look at
JJK >>it. :P
JJK >>
JJK >>Jenny
JJK >>
JJK >> On Mon, 26 Oct 2009, Lee Shell wrote:
JJK >>
JJK >>LS >>This may be have the same effect as you have already tried, but you
can
JJK >>try:
JJK >>LS >>My Computer
JJK >>LS >>Tools
JJK >>LS >>Folder Options
JJK >>LS >>File Types
JJK >>LS >>then set JPG to be PhotoPaint
JJK >>LS >>
JJK >>LS >>When I double-click a JPG, PhotoPaint opens.
JJK >>LS >>
JJK >>LS >> --
JJK >>LS >>Lee B Shell
JJK >>LS >>
JJK >>LS >>
JJK >>LS >>
JJK >>LS >>
JJK >>LS >>
JJK >>LS >>
JJK >>LS >>________________________________
JJK >>LS >>From: Jenny Payne <jpayne@...>
JJK >>LS >>To: CorelDraw list <coreldraw@yahoogroups.com>
JJK >>LS >>Sent: Monday, October 26, 2009 11:15:32 AM
JJK >>LS >>Subject: [coreldraw] default photo editor
JJK >>LS >>
JJK >>LS >>
JJK >>LS >>
JJK >>LS >>I'd like to be able to have Corel Photo Paint be my system's default
JJK >>photo
JJK >>LS >>editor, but keep having problems with this.  When I open a JPG, I
JJK >>LS >>right-click and choose "Open With" and set it to default to
JJK >>LS >>c:\coreldraw\ programs\ CorelPP.exe.  Yet each time, it still tries
to
JJK >>open
JJK >>LS >>with something called "Microsoft Photo Editor," which does not even
JJK >>appear
JJK >>LS >>to be installed on my machine, since nothing happens.  Is this
JJK >>happening
JJK >>LS >>to anyone else?  I thought about removing "Microsoft Photo Editor"
from
JJK >>my
JJK >>LS >>computer, but it is not listed in the control panel for
Adding/Removing
JJK >>LS >>programs...
JJK >>LS >>
JJK >>LS >>
JJK >>
JJK >>
JJK >>------------------------------------
JJK >>
JJK >>Yahoo! Groups Links
JJK >>
JJK >>
JJK >>
JJK >>
JJK >>
JJK >>
JJK >>------------------------------------
JJK >>
JJK >>Yahoo! Groups Links
JJK >>
JJK >>
JJK >>
JJK >>
JJK >>

Did you try Lee's directions?  I believe it's different from what you have been
doing, and I think it will work for you. (It's still attached, down at the
bottom.) You would need to do the same for the GIF file type and TIF or any
others you use.
Karen
====

--- In coreldraw@yahoogroups.com, Jenny Payne <jpayne@...> wrote:
>
>
> Thanks but that's not installed, Office 2000 is, but it's not a new
> installation.  It is so weird that it won't allow me to select
> CorelPP.exe.  The closest I can get is AdobePhotoshop, but I prefer
> CorelPhotoPaint for just quick edits and wish I didn't have to open that
> program first to be able to use it.
>
>
>  On Tue, 27 Oct 2009, Jan J. Kok
> wrote:
>
> JJK >>Could it be that you recently installed Office97 on your system? Or
> JJK >>one of its programs, like Word97? Microsoft Photo Editor usualy
> JJK >>came that way, bringing the default to open all jpg-files, unless you
> JJK >>carefully avoided this. No need for an IT. Follow Lee's directions
> JJK >>and it's all over, at least for the jpg-files. You probably also have to
> JJK >>do the same for other kinds of graphic files, like tif- or pcx-files.
> JJK >>
> JJK >>Jan
> JJK >>
> JJK >>
> JJK >>----- Original Message -----
> JJK >>From: "Jenny Payne" <jpayne@...>
> JJK >>To: <coreldraw@yahoogroups.com>
> JJK >>Sent: Monday, October 26, 2009 7:25 PM
> JJK >>Subject: Re: [coreldraw] default photo editor
> JJK >>
> JJK >>
> JJK >>
> JJK >>Thanks... yes, that would seem to be another way to do it.  But my
> JJK >>computer (running XP) will not allow me to choose anything other than
its
> JJK >>own list of programs to open photos.  Which is odd, because PhotoPaint
has
> JJK >>been the default in the past.  I guess I need to get IT in here to look
at
> JJK >>it. :P
> JJK >>
> JJK >>Jenny
> JJK >>
> JJK >> On Mon, 26 Oct 2009, Lee Shell wrote:
> JJK >>
> JJK >>LS >>This may be have the same effect as you have already tried, but you
can
> JJK >>try:
> JJK >>LS >>My Computer
> JJK >>LS >>Tools
> JJK >>LS >>Folder Options
> JJK >>LS >>File Types
> JJK >>LS >>then set JPG to be PhotoPaint
> JJK >>LS >>
> JJK >>LS >>When I double-click a JPG, PhotoPaint opens.
> JJK >>LS >>
> JJK >>LS >> --
> JJK >>LS >>Lee B Shell
> JJK >>LS >>
> JJK >>LS >>

Unfortunately, yes... several times. :/

--
Jenny
- - - - - - - - - - - - - - - - - - - - -

On Tue, 27 Oct 2009, krathbun wrote:

k >>Did you try Lee's directions?  I believe it's different from what you have
been doing, and I think it will work for you. (It's still attached, down at the
bottom.) You would need to do the same for the GIF file type and TIF or any
others you use.
k >>Karen
k >>====
k >>
k >>--- In coreldraw@yahoogroups.com, Jenny Payne <jpayne@...> wrote:
k >>>
k >>>
k >>> Thanks but that's not installed, Office 2000 is, but it's not a new
k >>> installation.  It is so weird that it won't allow me to select
k >>> CorelPP.exe.  The closest I can get is AdobePhotoshop, but I prefer
k >>> CorelPhotoPaint for just quick edits and wish I didn't have to open that
k >>> program first to be able to use it.
k >>>
k >>>
k >>>  On Tue, 27 Oct 2009, Jan J. Kok
k >>> wrote:
k >>>
k >>> JJK >>Could it be that you recently installed Office97 on your system? Or
k >>> JJK >>one of its programs, like Word97? Microsoft Photo Editor usualy
k >>> JJK >>came that way, bringing the default to open all jpg-files, unless
you
k >>> JJK >>carefully avoided this. No need for an IT. Follow Lee's directions
k >>> JJK >>and it's all over, at least for the jpg-files. You probably also
have to
k >>> JJK >>do the same for other kinds of graphic files, like tif- or
pcx-files.
k >>> JJK >>
k >>> JJK >>Jan
k >>> JJK >>
k >>> JJK >>
k >>> JJK >>----- Original Message -----
k >>> JJK >>From: "Jenny Payne" <jpayne@...>
k >>> JJK >>To: <coreldraw@yahoogroups.com>
k >>> JJK >>Sent: Monday, October 26, 2009 7:25 PM
k >>> JJK >>Subject: Re: [coreldraw] default photo editor
k >>> JJK >>
k >>> JJK >>
k >>> JJK >>
k >>> JJK >>Thanks... yes, that would seem to be another way to do it.  But my
k >>> JJK >>computer (running XP) will not allow me to choose anything other
than its
k >>> JJK >>own list of programs to open photos.  Which is odd, because
PhotoPaint has
k >>> JJK >>been the default in the past.  I guess I need to get IT in here to
look at
k >>> JJK >>it. :P
k >>> JJK >>
k >>> JJK >>Jenny
k >>> JJK >>
k >>> JJK >> On Mon, 26 Oct 2009, Lee Shell wrote:
k >>> JJK >>
k >>> JJK >>LS >>This may be have the same effect as you have already tried, but
you can
k >>> JJK >>try:
k >>> JJK >>LS >>My Computer
k >>> JJK >>LS >>Tools
k >>> JJK >>LS >>Folder Options
k >>> JJK >>LS >>File Types
k >>> JJK >>LS >>then set JPG to be PhotoPaint
k >>> JJK >>LS >>
k >>> JJK >>LS >>When I double-click a JPG, PhotoPaint opens.
k >>> JJK >>LS >>
k >>> JJK >>LS >> --
k >>> JJK >>LS >>Lee B Shell
k >>> JJK >>LS >>
k >>> JJK >>LS >>
k >>
k >>
k >>
k >>------------------------------------
k >>
k >>Yahoo! Groups Links
k >>
k >>
k >>
k >>
k >>

Sorry to hear that. Then maybe you will have to actually reinstall PhotoPaint.
I'm guessing, like others, that the file type association got changed on you
from something that was installed or updated, and installing PhotoPaint now
ought to reverse that back to the way you want it.
Karen


--- In coreldraw@yahoogroups.com, Jenny Payne <jpayne@...> wrote:
>
>
> Unfortunately, yes... several times. :/
>
> --
> Jenny
> - - - - - - - - - - - - - - - - - - - - -
>
> On Tue, 27 Oct 2009, krathbun wrote:
>
> k >>Did you try Lee's directions?  I believe it's different from what you have
been doing, and I think it will work for you. (It's still attached, down at the
bottom.) You would need to do the same for the GIF file type and TIF or any
others you use.
> k >>Karen

F-i-n-a-l-l-y figured this out... here's the fix in case anyone else has
the problem.

open Corel Photo Paint
go to
tools > options > global > associate
and set the preference there.

Jenny

Hi again,

Another CorelDraw problem I've noticed is the inability to move elements
by hand in Print Preview mode.  This is only when the image is tiled, and
it only seems to be happening since the latest Windows updates.  Has
anyone found a fix to this?

(CorelDraw 12, Windows XP here)

Jenny

Glad you found the solution!  Thanks for letting us all know.
Karen

--- In coreldraw@yahoogroups.com, Jenny Payne <jpayne@...> wrote:
>
>
> F-i-n-a-l-l-y figured this out... here's the fix in case anyone else has
> the problem.
>
> open Corel Photo Paint
> go to
> tools > options > global > associate
> and set the preference there.
>
> Jenny
>

Will Corel Draw 12 work well with Windows 7?  Thanks,  Jake

OK, here's another one that drives me crazy...Separation function cannot be
assigned a hot key.  I use this all day long and would love to have the option
to assign a single hot key to apply this function but it doesn't work.  I have
to use a symbol assigned for the separation tool.

--- In coreldraw@yahoogroups.com, "Bill" <billha88@...> wrote:
>
> Ok, I like many things that Draw does but I am going to devote this thread to
a list of functions that are lacking or could be improved upon.  Everyone feel
free to add to this list or to correct me if I am mistaken.  I guess it would be
beneficial to also make a list of the strong functions but problems are always
more interesting and worth discussion.  I am working with Draw 11 so possibly
these features have been added since then.
>
> Here goes:
>
> 1. As far as I know there is no function in Draw that finds the same
attributes (ex. fill) in all objects in a file as there is in Illustrator.
>

In Corel 12, I have a custom property bar for "text" that I've created.  I have
intended to have pop up seperately from the rest of my property bars.  I've made
sure in TOOLS to: SAVE SETTINGS AS DEFAULT.

When I log out at night and log back in the next day, the saved setting does not
take place and goes back to an area that I don't want.  Any ideas?

Thanks in advance.

Paul

Hello,


I have created a custom page, but for some reason I can not seem to set this
page as the default for when I select a new page.

Does anyone know if this is possible?

Thank you,

Fred

Open the file that you want to save as the default.

Select  - Tools heading at the top of Corel Draw window

Select - Save as Default option under tools.



________________________________
From: sma_sb <sma1974@...>
To: coreldraw@yahoogroups.com
Sent: Wed, November 11, 2009 10:20:56 AM
Subject: [coreldraw] Setting the default page size


Hello,

I have created a custom page, but for some reason I can not seem to set this
page as the default for when I select a new page.

Does anyone know if this is possible?

Thank you,

Fred







[Non-text portions of this message have been removed]

Thank you Bill - you have no idea how long I have been trying to get this!

--- In coreldraw@yahoogroups.com, Bill Harris <billha88@...> wrote:
>
> Open the file that you want to save as the default.
>
> Select  - Tools heading at the top of Corel Draw window
>
> Select - Save as Default option under tools.
>
>
>
> ________________________________
> From: sma_sb <sma1974@...>
> To: coreldraw@yahoogroups.com
> Sent: Wed, November 11, 2009 10:20:56 AM
> Subject: [coreldraw] Setting the default page size
>
>
> Hello,
>
> I have created a custom page, but for some reason I can not seem to set this
page as the default for when I select a new page.
>
> Does anyone know if this is possible?
>
> Thank you,
>
> Fred
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

Hello,

I have a problem in that I want to create a bunch of files that have names where
I need the area on the sides to be cut out, but the tops need to be attached. I
can do this manually but it takes a very long time to process a single word and
I was wondering if there is a faster process?

As this description is probably somewhat confusing, I have uploaded a file to:
Files\Fred's examples\ScreenHunter_01 Nov. 14 10.13.jpg for your review.

Thank you,

Fred Wildauer

hi

I want to design one magazine in Persian language.

Is there any special version for supporting persian language?

I have already typed the matter in MSWord.

Is there any one who will help me?

Aisha

Two ways to do it:

Type your text.

Put your rectangle in the proper spot.

Click on your text. Hold down the shift key, and select the rectangle.

Click the trim icon on the interactive tool bar. Delete the original text.

OR

Type your text.

Put your rectangle in the proper spot.

Click on your text. Hold down the shift key, and select the rectangle.

Click the front minus back icon on the interactive tool bar.

I usually use the first method because I can never remember whether to use front
minus back or back minus front.

Jill
ListDespot


----- Original Message ----
From: sma_sb <sma1974@...>

Hello,

I have a problem in that I want to create a bunch of files that have names where
I need the area on the sides to be cut out, but the tops need to be attached. I
can do this manually but it takes a very long time to process a single word and
I was wondering if there is a faster process?

As this description is probably somewhat confusing, I have uploaded a file to:
Files\Fred's examples\ScreenHunter_01 Nov. 14 10.13.jpg for your review.

Thank you,

Fred Wildauer

Hello,

This is sort of difficult to explain, I am trying to find the setting that
defines the increments for which you can move an object either via a pointing
device or arrows.

I am using CD12 and the distance between increments is somewhat large.

Thank you,

Fred Wildauer

Thank you very much Jill!

That was exactly what I was looking for! I can now create in minutes what used
to take over well over an hour!


--- In coreldraw@yahoogroups.com, Jill Tallman <lettuce_in_fl@...> wrote:
>
> Two ways to do it:
>
> Type your text.
>
> Put your rectangle in the proper spot.
>
> Click on your text. Hold down the shift key, and select the rectangle.
>
> Click the trim icon on the interactive tool bar. Delete the original text.
>
> OR
>
> Type your text.
>
> Put your rectangle in the proper spot.
>
> Click on your text. Hold down the shift key, and select the rectangle.
>
> Click the front minus back icon on the interactive tool bar.
>
> I usually use the first method because I can never remember whether to use
front minus back or back minus front.
>
> Jill
> ListDespot
>
>
> ----- Original Message ----
> From: sma_sb <sma1974@...>
>
> Hello,
>
> I have a problem in that I want to create a bunch of files that have names
where I need the area on the sides to be cut out, but the tops need to be
attached. I can do this manually but it takes a very long time to process a
single word and I was wondering if there is a faster process?
>
> As this description is probably somewhat confusing, I have uploaded a file to:
Files\Fred's examples\ScreenHunter_01 Nov. 14 10.13.jpg for your review.
>
> Thank you,
>
> Fred Wildauer
>

you want to change your nudge. this is from X3, because I don't have anything
older here. with nothing selected, hover over your property bar icons. one of
them should pop up a tool-tip that says Nudge Offset. change to the amount you
want.

OR

right click on the ruler and select ruler setup. you can change your nudge
there.

HTH

Jill
ListDespot


----- Original Message ----
From: sma_sb sma1974@...

Hello,

This is sort of difficult to explain, I am trying to find the setting that
defines the increments for which you can move an object either via a pointing
device or arrows.

I am using CD12 and the distance between increments is somewhat large.

Thank you,

Fred Wildauer

Look under Tools/ Options/ Rulers ...

See the attachment.

I have to change this all the time ... so I totally understand your need.

DrEddie

***************


From: sma_sb
Sent: Monday, November 16, 2009 6:28 AM
To: coreldraw@yahoogroups.com
Subject: [coreldraw] Setting the movement increments?



Hello,

This is sort of difficult to explain, I am trying to find the setting that
defines the increments for which you can move an object either via a pointing
device or arrows.

I am using CD12 and the distance between increments is somewhat large.

Thank you,

Fred Wildauer





[Non-text portions of this message have been removed]

I strongly suggest that you make a hot key for this function.  I use the nudge
key more then any other tool in Draw.  Once you  access the nudge tool as
indicated below you will be able to use your hot key to do the same thing.  I
have the "N" key assigned to the nudge tool.  I just hit the "N" key and the
nudge dialogue box pops up and I can change this increment to whatever amount I
need.

Tools - Options - Workspace - Customization - Commands - select binoculars
symbol and type nudge - this will locate the nudge tool for you - assign a key
to the nudge tool - click ok.




________________________________
From: Jill Tallman <lettuce_in_fl@...>
To: coreldraw@yahoogroups.com
Sent: Mon, November 16, 2009 10:00:23 AM
Subject: Re: [coreldraw] Setting the movement  increments?


you want to change your nudge. this is from X3, because I don't have anything
older here. with nothing selected, hover over your property bar icons. one of
them should pop up a tool-tip that says Nudge Offset. change to the amount you
want.

OR

right click on the ruler and select ruler setup. you can change your nudge
there.

HTH

Jill
ListDespot

----- Original Message ----
From: sma_sb sma1974@gmail. com

Hello,

This is sort of difficult to explain, I am trying to find the setting that
defines the increments for which you can move an object either via a pointing
device or arrows.

I am using CD12 and the distance between increments is somewhat large.

Thank you,

Fred Wildauer







[Non-text portions of this message have been removed]

This is probably very simple but I can't remember how to take the word "Merry
Christmas" and make it look like a wave.  THANKS Debbie

you can either choose 'text to a curve in the font menu that you draw or go to
the envelope tool.

--- On Thu, 11/19/09, DebbieR <debbierinehart93@...> wrote:


From: DebbieR <debbierinehart93@...>
Subject: [coreldraw] text wave
To: coreldraw@yahoogroups.com
Date: Thursday, November 19, 2009, 1:50 PM


 



This is probably very simple but I can't remember how to take the word "Merry
Christmas" and make it look like a wave. THANKS Debbie











[Non-text portions of this message have been removed]

Heya everyone,

Does anyone have any vectorized Calvin & Hobbes or just Calvin graphics that
they could e-mail me? (Hopefully, pc compatible CDR or EPS files.)

My wife & daughters love them and want me to make some decals for them.


Thanks,
Matt

Hi Matt,
I sure do, I will go look for them now.
Do you have anything you would like to trade?
I would love to find some snowmobile racing eps or corel files.
I am always looking for someone to trade files with.
Sheri


From: BlueSkyGem
Sent: Monday, November 23, 2009 9:45 AM
To: coreldraw@yahoogroups.com
Subject: [coreldraw] Calvin & Hobbes



Heya everyone,

Does anyone have any vectorized Calvin & Hobbes or just Calvin graphics that
they could e-mail me? (Hopefully, pc compatible CDR or EPS files.)

My wife & daughters love them and want me to make some decals for them.

Thanks,
Matt





[Non-text portions of this message have been removed]

Hmmm.  I don't happen to have any snowmobile graphics.  (I might have
something in my CD clipart file though.



--- In coreldraw@yahoogroups.com, "Sheri" <sheri@...> wrote:
>
> Hi Matt,
> I sure do, I will go look for them now.
> Do you have anything you would like to trade?
> I would love to find some snowmobile racing eps or corel files.
> I am always looking for someone to trade files with.
> Sheri
>
>
> From: BlueSkyGem
> Sent: Monday, November 23, 2009 9:45 AM
> To: coreldraw@yahoogroups.com
> Subject: [coreldraw] Calvin & Hobbes
>
>
>
> Heya everyone,
>
> Does anyone have any vectorized Calvin & Hobbes or just Calvin
graphics that they could e-mail me? (Hopefully, pc compatible CDR or EPS
files.)
>
> My wife & daughters love them and want me to make some decals for
them.
>
> Thanks,
> Matt
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

Please don't ask for copyrighted artwork on the list!

Joel A. Ohmer
Graphic Artist/Illustrator
Ohmer! Design
985.438.0169
www.ohmerdesign.com
www.myspace.com/ohmerdesign


On Mon, Nov 23, 2009 at 8:45 AM, BlueSkyGem <tornadointhesky@...>wrote:

>
>
> Heya everyone,
>
> Does anyone have any vectorized Calvin & Hobbes or just Calvin graphics
> that they could e-mail me? (Hopefully, pc compatible CDR or EPS files.)
>
> My wife & daughters love them and want me to make some decals for them.
>
> Thanks,
> Matt
>
>
>


[Non-text portions of this message have been removed]

Oops!  Sorry.  I hoped that since this is for my family and not to be
sold I was ok.

(I retract my request.)


--- In coreldraw@yahoogroups.com, Joel Ohmer <joel.ohmer@...> wrote:
>
> Please don't ask for copyrighted artwork on the list!
>
> Joel A. Ohmer
> Graphic Artist/Illustrator
> Ohmer! Design
> 985.438.0169
> www.ohmerdesign.com
> www.myspace.com/ohmerdesign
>
>
> On Mon, Nov 23, 2009 at 8:45 AM, BlueSkyGem tornadointhesky@...wrote:
>
> >
> >
> > Heya everyone,
> >
> > Does anyone have any vectorized Calvin & Hobbes or just Calvin
graphics
> > that they could e-mail me? (Hopefully, pc compatible CDR or EPS
files.)
> >
> > My wife & daughters love them and want me to make some decals for
them.
> >
> > Thanks,
> > Matt
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>

i understand ... i just don't want the list coming under any scrutiny by the
litigious vermin that scour YahooGroups. :o)

Joel A. Ohmer
Graphic Artist/Illustrator
Ohmer! Design
985.438.0169
www.ohmerdesign.com
www.myspace.com/ohmerdesign


On Tue, Nov 24, 2009 at 9:12 AM, BlueSkyGem <tornadointhesky@...>wrote:

>
>
>
> Oops! Sorry. I hoped that since this is for my family and not to be
> sold I was ok.
>
> (I retract my request.)
>
>
> --- In coreldraw@yahoogroups.com <coreldraw%40yahoogroups.com>, Joel Ohmer
> <joel.ohmer@...> wrote:
> >
> > Please don't ask for copyrighted artwork on the list!
> >
> > Joel A. Ohmer
> > Graphic Artist/Illustrator
> > Ohmer! Design
> > 985.438.0169
> > www.ohmerdesign.com
> > www.myspace.com/ohmerdesign
> >
> >
> > On Mon, Nov 23, 2009 at 8:45 AM, BlueSkyGem tornadointhesky@...wrote:
>
> >
> > >
> > >
> > > Heya everyone,
> > >
> > > Does anyone have any vectorized Calvin & Hobbes or just Calvin
> graphics
> > > that they could e-mail me? (Hopefully, pc compatible CDR or EPS
> files.)
> > >
> > > My wife & daughters love them and want me to make some decals for
> them.
> > >
> > > Thanks,
> > > Matt
> > >
> > >
> > >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>


[Non-text portions of this message have been removed]

Ozark Thread Works is looking for talented artist's to join our design team.

We provide embroidery and monogramming services to small business, bands, clubs,
and individuals. As a supplier of embroidered apparel, caps and miscellaneous
items we are always looking for the next great design.

We are looking for freelance artist who are interested in having their work
displayed in other non-traditional formats (decorated apparel, patches, etc.). 
If accepted to join our team, we look forward to a long term working
relationship. Act now as we have a limited number of openings.

For more information visit our website:
http://www.ozarkthreadworks.com/Designstudio.html
Click on the Design Studio tab and read the PDF file for terms/conditions.

Thank you,
Bryon Hunter
www.ozarkthreadworks.com