What did the log say for the user when they hit the site?



________________________________

From: dansguardian@yahoogroups.com [mailto:dansguardian@yahoogroups.com]
On Behalf Of Bruce Sackett
Sent: Wednesday, June 30, 2010 6:06 PM
To: dansguardian@yahoogroups.com
Subject: [dansguardian] Trouble with a website - can only access if PC
is in exceptioniplist





Hit an odd one today - I have someone trying to access a website that
seems
to ONLY work if I add a computer to exceptioniplist.

If I remove the PC from exceptioniplist, it cannot display, like the PC
is
not even connected to the internet.

The one catch I'm seeing as a hint is that the internal subnet is
10.0.0.XXX, and the site is actually on 192.XXX.XXX.XXX - not a local
subnet, but close - I'm worried I missed some config option that is
making
dansguardian look in the wrong location for the site?

Bruce Sackett

Office Equipment Company

bruce@... <mailto:bruce%40oecnw.com>

541.342.3325

[Non-text portions of this message have been removed]




--
This message has been scanned for viruses and
dangerous content by MailScanner <http://www.mailscanner.info/> , and is

believed to be clean.


[Non-text portions of this message have been removed]

Found it and for posterity sakes I'll post the solution here.



The issue deals with the group names.  The group names within the
dansguardianf1, f2, f3, etc... an be customized.  However, the
filtergrouplist must have user=filter1, user=filter2 where filter1 =
dansguardianf1, filter2=dansguardianf2, etc...



________________________________

From: dansguardian@yahoogroups.com [mailto:dansguardian@yahoogroups.com]
On Behalf Of Scott
Sent: Monday, June 28, 2010 9:27 AM
To: dansguardian@yahoogroups.com
Subject: RE: [dansguardian] multiple group issue





I used this one:

http://contentfilter.futuragts.com/wiki/doku.php?id=group_configuration

________________________________

From: dansguardian@yahoogroups.com
<mailto:dansguardian%40yahoogroups.com>
[mailto:dansguardian@yahoogroups.com
<mailto:dansguardian%40yahoogroups.com> ]
On Behalf Of John D. Spinuzzi
Sent: Monday, June 28, 2010 8:16 AM
To: dansguardian@yahoogroups.com <mailto:dansguardian%40yahoogroups.com>

Subject: Re: [dansguardian] multiple group issue

Scott,

Can you please post a link to the document you followed?

On Jun 27, 2010, at 10:01 PM, "Scott" <halo@...
<mailto:halo%40netprof.us>
<mailto:halo%40netprof.us> > wrote:

>
>
>
>
> I just set up another dansguardian proxy with multiple groups using
> ntlm
> auth. The authorization works great and shows the user's name in the
> log files. I followed the steps to automate the importing of the
> users
> into the group file and verified that the file is built properly.
> However, I soon discovered that everyone was being placed into the
> default group when looking at the log files. I've verified that the
> linux box is inserted and samba is able to view the AD tree/users/
> groups
> without any issues. The log shows the user name which does match the
> group in filtergroupslist. I don't see any errors in any of the logs
> that would point me in any particular direction. Does anyone either
> know what might be going on or how I can further troubleshoot this
> issue?
>
>
>
> Thanks
>
> Scott
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner <http://www.mailscanner.info/> ,
> and is
>
> believed to be clean.
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> For unsubscribing, mailing list rules and posting guidelines please
> see:
> http://dansguardian.org/?page=mailinglistYahoo! Groups Links
>
>
>
>

--
This message has been scanned for viruses and
dangerous content by MailScanner <http://www.mailscanner.info/> , and is

believed to be clean.

[Non-text portions of this message have been removed]




--
This message has been scanned for viruses and
dangerous content by MailScanner <http://www.mailscanner.info/> , and is

believed to be clean.


[Non-text portions of this message have been removed]

Please The following website are inaccessible:

www.cedarfort.com

www.ensignbooks.com





Using latest version of DG and squid



Both sites are in the exception site list as well



Any ideas?





Donnie  Morris



Confetti Antiques & Books

273 North Main Street

Spanish Fork, UT 84660

USA

801-798-0137

  <http://www.confettibooks.com/> www.confettibooks.com - New, Used, Rare and
Out of Print Books (LDS/Mormon)

www.confettiantiques.com - LDS / Books/ Antiques News, information and More.

Follow us on Twitter -  <http://twitter.com/confettibooks>
http://twitter.com/confettibooks

Tues - Saturday 10am - 6pm Mountain

Mondays - Sometimes (call ahead)





[Non-text portions of this message have been removed]

Hi

I considering setting up a filtering squid proxy again but I thought I
ask first how good the current AD block list is.
I was using SquidGuard back in 2005, here is the head of that rulefile:

#
# !!! WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING !!!
#
# This list is entierly a product of a dumb robot (squidGuardRobot-2.3.7).
# We strongly recommend that you review the lists before using them!
# Don't blame us if there are mistakes, but please report errors with
# the online tool at http://www.squidguard.org/blacklist/
#
# !!! WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING !!!
#
# This list was compiled in 0:50:39 on 2005.10.08 00:50:53.
# This list was compiled from 0 link sources and 2202 links,
# of which 917 tested successfully.

Anyways they were crappy back then and now it doesn't even exist so I
thought I give a shot for DG because it's might be better.
Or is there better AD block modul/ ad domain list than what DG can offer?

Thanks
Jax

I do not want to receive messages from dansguardian@yahoogroups.com.

It is possible to remove my address.

--- En date de : Mer 7.7.10, Jax <cybercorecentre@...> a écrit :

De: Jax <cybercorecentre@...>
Objet: [dansguardian] How good is dansguardians blocklist atm (2010 July)
À: dansguardian@yahoogroups.com
Date: Mercredi 7 juillet 2010, 4h40







 









       Hi



I considering setting up a filtering squid proxy again but I thought I

ask first how good the current AD block list is.

I was using SquidGuard back in 2005, here is the head of that rulefile:



#

# !!! WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING !!!

#

# This list is entierly a product of a dumb robot (squidGuardRobot-2.3.7).

# We strongly recommend that you review the lists before using them!

# Don't blame us if there are mistakes, but please report errors with

# the online tool at http://www.squidguard.org/blacklist/

#

# !!! WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING !!!

#

# This list was compiled in 0:50:39 on 2005.10.08 00:50:53.

# This list was compiled from 0 link sources and 2202 links,

# of which 917 tested successfully.



Anyways they were crappy back then and now it doesn't even exist so I

thought I give a shot for DG because it's might be better.

Or is there better AD block modul/ ad domain list than what DG can offer?



Thanks

Jax























[Non-text portions of this message have been removed]

--- En date de : Mer 7.7.10, bouzembrak nasser <sfortonato78@...> a
écrit :

De: bouzembrak nasser <sfortonato78@...>
Objet: Re : [dansguardian] How good is dansguardians blocklist atm (2010 July)
À: dansguardian@yahoogroups.com
Date: Mercredi 7 juillet 2010, 12h46







 









       I do not want to receive messages from dansguardian@yahoogroups.com.



It is possible to remove my address.



--- En date de : Mer 7.7.10, Jax <cybercorecentre@...> a écrit :



De: Jax <cybercorecentre@...>

Objet: [dansguardian] How good is dansguardians blocklist atm (2010 July)

À: dansguardian@yahoogroups.com

Date: Mercredi 7 juillet 2010, 4h40



 



Hi



I considering setting up a filtering squid proxy again but I thought I



ask first how good the current AD block list is.



I was using SquidGuard back in 2005, here is the head of that rulefile:



#



# !!! WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING !!!



#



# This list is entierly a product of a dumb robot (squidGuardRobot-2.3.7).



# We strongly recommend that you review the lists before using them!



# Don't blame us if there are mistakes, but please report errors with



# the online tool at http://www.squidguard.org/blacklist/



#



# !!! WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING !!!



#



# This list was compiled in 0:50:39 on 2005.10.08 00:50:53.



# This list was compiled from 0 link sources and 2202 links,



# of which 917 tested successfully.



Anyways they were crappy back then and now it doesn't even exist so I



thought I give a shot for DG because it's might be better.



Or is there better AD block modul/ ad domain list than what DG can offer?



Thanks



Jax



[Non-text portions of this message have been removed]

























[Non-text portions of this message have been removed]

I began writing a perl script that would take the "easyfilter" list from
AdBlockPlus for firefox and turning it into a regex list for dansguardian. I
never finished the script though. I think that would be a very powerful way
to block ADs since the list is updated regularly. I'm just not uber enough
to code it.
-Doug






On Tue, Jul 6, 2010 at 10:40 PM, Jax <cybercorecentre@...> wrote:

>
>
> Hi
>
> I considering setting up a filtering squid proxy again but I thought I
> ask first how good the current AD block list is.
> I was using SquidGuard back in 2005, here is the head of that rulefile:
>
> #
> # !!! WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING !!!
> #
> # This list is entierly a product of a dumb robot (squidGuardRobot-2.3.7).
> # We strongly recommend that you review the lists before using them!
> # Don't blame us if there are mistakes, but please report errors with
> # the online tool at http://www.squidguard.org/blacklist/
> #
> # !!! WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING !!!
> #
> # This list was compiled in 0:50:39 on 2005.10.08 00:50:53.
> # This list was compiled from 0 link sources and 2202 links,
> # of which 917 tested successfully.
>
> Anyways they were crappy back then and now it doesn't even exist so I
> thought I give a shot for DG because it's might be better.
> Or is there better AD block modul/ ad domain list than what DG can offer?
>
> Thanks
> Jax
>
>


[Non-text portions of this message have been removed]

Yeah this was my feeling as well. ADblock plus+Flashblock+Noscript
ubers this DG and squidguard too.
Then I don't bother :)

On Wed, Jul 7, 2010 at 8:58 PM, portglas@... <portglas@...> wrote:
> I began writing a perl script that would take the "easyfilter" list from
> AdBlockPlus for firefox and turning it into a regex list for dansguardian. I
> never finished the script though. I think that would be a very powerful way
> to block ADs since the list is updated regularly. I'm just not uber enough
> to code it.
> -Doug
>
>
>
>
>
>
> On Tue, Jul 6, 2010 at 10:40 PM, Jax <cybercorecentre@...> wrote:
>
>>
>>
>> Hi
>>
>> I considering setting up a filtering squid proxy again but I thought I
>> ask first how good the current AD block list is.
>> I was using SquidGuard back in 2005, here is the head of that rulefile:
>>
>> #
>> # !!! WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING !!!
>> #
>> # This list is entierly a product of a dumb robot (squidGuardRobot-2.3.7).
>> # We strongly recommend that you review the lists before using them!
>> # Don't blame us if there are mistakes, but please report errors with
>> # the online tool at http://www.squidguard.org/blacklist/
>> #
>> # !!! WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING !!!
>> #
>> # This list was compiled in 0:50:39 on 2005.10.08 00:50:53.
>> # This list was compiled from 0 link sources and 2202 links,
>> # of which 917 tested successfully.
>>
>> Anyways they were crappy back then and now it doesn't even exist so I
>> thought I give a shot for DG because it's might be better.
>> Or is there better AD block modul/ ad domain list than what DG can offer?
>>
>> Thanks
>> Jax
>>
>>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> For unsubscribing, mailing list rules and posting guidelines please see:
> http://dansguardian.org/?page=mailinglistYahoo! Groups Links
>
>
>
>

Hi,

i would like you to assist me in configuring dansguardian to give access to
users based on time. I would like to give to users access to restricted websites
at lunch time and after lunch. I have two groups: one group is having more
access privileges than the second(this one in blanket).
I did some configurations on the bannedsites files and greysites files by
enabling them based on time but it seems it cannot run on 2 different set of
time (meaning between: 12h-14h and 18h-19h) at the same time. it runs one of the
set.
My question is there a way of doing this with dansguardian? If yes how do i have
to configure this?

Thank you in advance

I'm sure there's a more elegant method, but I think you could do this with a
couple of shell scripts that swap out group lists based on a cron job.

Assuming you're running in a *nix environment, of course.

Mark in Virginia

>
>
> Hi,
>
> i would like you to assist me in configuring dansguardian to give
> access to users based on time. I would like to give to users access
> to restricted websites at lunch time and after lunch. I have two
> groups: one group is having more access privileges than the
> second(this one in blanket).
> I did some configurations on the bannedsites files and greysites
> files by enabling them based on time but it seems it cannot run on
> 2 different set of time (meaning between: 12h-14h and 18h-19h) at
> the same time. it runs one of the set.
> My question is there a way of doing this with dansguardian? If yes
> how do i have to configure this?
>
> Thank you in advance
>
>
>
>
>
> Reply to sender |
>
> Reply to group |
> Reply via web post |
> Start a New Topic
>
>
> Messages in this topic
> (1)
>
>
> Recent Activity:
>
>
> -

Back on this subject after a bit of a hiatus.  Here is an example of a site I
would like to block – http://www.vector-logos.com/mg_goods_ru.htm or
http://vnemira.ru/a-freeadds/tov but I’m having trouble creating phraselists.
I copy text from the page, (Знакомства, Russian for “dating”) 
such as  past it into a phraselist file and get ‘????????’ instead of the
actual font characters.



Now whatever is causing this, I don’t know. I thought it’s because my linux
firewall distro doesn’t have the font installed. Apparently not… But what IS
the problem?



Thanks,


Dave



From: dansguardian@yahoogroups.com [mailto:dansguardian@yahoogroups.com] On
Behalf Of deepbassnine
Sent: Tuesday, June 22, 2010 11:17 AM
To: dansguardian@yahoogroups.com
Subject: [dansguardian] Re: Blocking this site





--- In dansguardian@yahoogroups.com <mailto:dansguardian%40yahoogroups.com> ,
"Dave Burkholder" <dave@...> wrote:
>
> I wasn’t clear; I know I could block the domain. But I want to block
that type of content via Phraselists regardless of domain. Is there some way of
installing extra font packs for DG? Or am on the wrong trail altogether?

Catching phrases from websites has nothing to do with fonts. Fonts are the
graphical representation of Characters.
Interesting for DG is the character encoding, which maps characters to their
binary representation. Ages ago the most used encoding was simply ASCII, but
today it's a little more complicated. While many american and european sites use
ISO-8859-1, the universal UTF-8 encoding gets more and more popular.
http://cred-fin.ru/ uses UTF-8.
In general, DG doesn't care about encoding, which can be called a feature, not a
bug. You can write phraselists in any encoding a site may probably use.
If you wish to block content using different encodings on different sites, you
have to add the phrases in all possible encodings to the appropriate lists.
In this example, http://cred-fin.ru/, you just have to make sure, your russian
phraselists are UTF-8 encoded (as far as I can see, it is a financial site, so I
don't know, why blocking it at all).

Cheers,
seBASStian





[Non-text portions of this message have been removed]

Hello,

I recently set up a web proxy using Dansguardian and squid on ubuntu 9.10. I
used some regular expressions to block the whole Internet except for a few sites
that i unblocked using the ExceptionSiteList(domains).  But i ran in to a small
problem. both maps.google.com and mapquest.com don't function correctly.
Mapquest only loads a line or two of the header text and then quits. 
Maps.google.com loads, but when you type in an address and hit the map button it
just sits and hangs. both Google.com and mapquest.com are listed in the
exception list.  I cant seem to figure out how to make these sites load
correctly.  I looked around on the Internet and didn't run in to anything
helpful. is there something i am over looking?

Thanks,

Richard.

Monitor the log files when you're visiting one of those sites. At the
command line, type in



tail -f /var/log/dansguardian/access.log



then then visit maps.google.com and see what logs get spit out. That will
give us a clue what's happening.



Thanks,



Dave



From: dansguardian@yahoogroups.com [mailto:dansguardian@yahoogroups.com] On
Behalf Of tbr_random
Sent: Monday, July 12, 2010 1:35 AM
To: dansguardian@yahoogroups.com
Subject: [dansguardian] mapquest and google maps





Hello,

I recently set up a web proxy using Dansguardian and squid on ubuntu 9.10. I
used some regular expressions to block the whole Internet except for a few
sites that i unblocked using the ExceptionSiteList(domains). But i ran in to
a small problem. both maps.google.com and mapquest.com don't function
correctly. Mapquest only loads a line or two of the header text and then
quits. Maps.google.com loads, but when you type in an address and hit the
map button it just sits and hangs. both Google.com and mapquest.com are
listed in the exception list. I cant seem to figure out how to make these
sites load correctly. I looked around on the Internet and didn't run in to
anything helpful. is there something i am over looking?

Thanks,

Richard.



[Non-text portions of this message have been removed]

I ran the command "tail -f /var/log/dansguardian/access.log"  and then looked in
to the /var/log/dansguardian/access.log while loading the sites.  I discoved
that the reason why the images and pages where only half loading is because the
images are linked from other sites. sites that are not in the exception list.
The regular expressions i used to block the internet are as follows
(/*.com/*)
(/*.net/*)
(/*.org/*)
(/*.info/*)
(/*.mobi/*)

there are a few more i didn't list.  My plan was to block the entire Internet
except for  about 100 web pages. These would be listed in the exceptions list.
but now i see that this will prevent images and content on the Allowed sites
from loading, if they are linked to from an external source.  I don't think i
can adequately go through and add all the sites and references to other sites
that these allowed sites require. Or that i would always know what they where
for that matter.  Here is a clip from the log file when Mapquest.com was
accessed.


2010.7.12 19:44:33 - 192.168.1.15 http://new.mapquest.com *EXCEPTION* Exception
site match. GET 6793 0  1 200 -   -
2010.7.12 19:44:34 - 192.168.1.15
http://vtiles04.mqcdn.com/tiles/std/vx/map?s=29337258&y=7&x=11 *DENIED* Banned
Regular Expression URL: (/*.com/*) GET 0 0 Banned Regular Expression URLs 1 403
-   -
2010.7.12 19:44:34 - 192.168.1.15
http://vtiles04.mqcdn.com/tiles/std/vx/map?s=29337258&y=6&x=11 *DENIED* Banned
Regular Expression URL: (/*.com/*) GET 0 0 Banned Regular Expression URLs 1 403
-   -
2010.7.12 19:44:34 - 192.168.1.15
http://vtiles04.mqcdn.com/tiles/std/vx/map?s=29337258&y=5&x=11 *DENIED* Banned
Regular Expression URL: (/*.com/*) GET 0 0 Banned Regular Expression URLs 1 403
-   -
2010.7.12 19:44:34 - 192.168.1.15
http://vtiles04.mqcdn.com/tiles/std/vx/map?s=29337258&y=4&x=11 *DENIED* Banned
Regular Expression URL: (/*.com/*) GET 0 0 Banned Regular Expression URLs 1 403
-   -
2010.7.12 19:44:34 - 192.168.1.15
http://vtiles01.mqcdn.com/tiles/std/vx/map?s=29337258&y=7&x=0 *DENIED* Banned
Regular Expression URL: (/*.com/*) GET 0 0 Banned Regular Expression URLs 1 403
-   -
2010.7.12 19:44:34 - 192.168.1.15
http://vtiles01.mqcdn.com/tiles/std/vx/map?s=29337258&y=6&x=0 *DENIED* Banned
Regular Expression URL: (/*.com/*) GET 0 0 Banned Regular Expression URLs 1 403
-   -
2010.7.12 19:44:34 - 192.168.1.15
http://vtiles01.mqcdn.com/tiles/std/vx/map?s=29337258&y=5&x=0 *DENIED* Banned




Is there a way to allow everything on a site that is in the exception list even
the images and data pulled to the allowed site from an external source?   I
think i can just add mqcdn.com to the exception list and fix the mapquest.com
problem. but a few of the other sites have data thats pulled from multiple
sources.

Is there a better way to achieve what i am trying to do?  or did i possibly make
an error in my theory of banning all allowing only the few sites that are
needed?

Thank you for your time and input,

Richard






________________________________
From: Dave Burkholder <dave@...>
To: dansguardian@yahoogroups.com
Sent: Mon, July 12, 2010 6:29:56 AM
Subject: RE: [dansguardian] mapquest and google maps


Monitor the log files when you're visiting one of those sites. At the
command line, type in

tail -f /var/log/dansguardian/access.log

then then visit maps.google.com and see what logs get spit out. That will
give us a clue what's happening.

Thanks,

Dave

From: dansguardian@yahoogroups.com [mailto:dansguardian@yahoogroups.com] On
Behalf Of tbr_random
Sent: Monday, July 12, 2010 1:35 AM
To: dansguardian@yahoogroups.com
Subject: [dansguardian] mapquest and google maps

Hello,

I recently set up a web proxy using Dansguardian and squid on ubuntu 9.10. I
used some regular expressions to block the whole Internet except for a few
sites that i unblocked using the ExceptionSiteList(domains). But i ran in to
a small problem. both maps.google.com and mapquest.com don't function
correctly. Mapquest only loads a line or two of the header text and then
quits. Maps.google.com loads, but when you type in an address and hit the
map button it just sits and hangs. both Google.com and mapquest.com are
listed in the exception list. I cant seem to figure out how to make these
sites load correctly. I looked around on the Internet and didn't run in to
anything helpful. is there something i am over looking?

Thanks,

Richard.

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]

O DansGuardinan esta bloqueando os contatos do Yhaoo! Mail

URL dos contatos:

http://address.yahoo.com/

would use Blacket Block mode instead regular expressions to achieve a
whitelist. In the /etc/dansguardian/bannedsitelist file, you’ll find this
section:



#Blanket Block##.  To block all sites except those in the

#exceptionsitelist and greysitelist files, remove

#the # from the next line to leave only a '**':

#**



Change #** to ** and VOILA, you’ll have Blanket Block mode.



>>I don't think i can adequately go through and add all the sites and references
to other sites

>>that these allowed sites require. Or that i would always know what they where

>>for that matter.



That’s one of the major hassles of the whitelist / Blanket Block mode. You do
have to physically enter every site you want to use, whether you directly enter
the site into the browser address bar, or whether the site is used somewhere in
the webpage code.



Thanks,



Dave



From: dansguardian@yahoogroups.com [mailto:dansguardian@yahoogroups.com] On
Behalf Of Richard Parkins IV
Sent: Monday, July 12, 2010 11:07 PM
To: dansguardian@yahoogroups.com
Subject: Re: [dansguardian] mapquest and google maps





I ran the command "tail -f /var/log/dansguardian/access.log" and then looked in
to the /var/log/dansguardian/access.log while loading the sites. I discoved
that the reason why the images and pages where only half loading is because the
images are linked from other sites. sites that are not in the exception list.
The regular expressions i used to block the internet are as follows
(/*.com/*)
(/*.net/*)
(/*.org/*)
(/*.info/*)
(/*.mobi/*)

there are a few more i didn't list. My plan was to block the entire Internet
except for about 100 web pages. These would be listed in the exceptions list.
but now i see that this will prevent images and content on the Allowed sites
from loading, if they are linked to from an external source. I don't think i
can adequately go through and add all the sites and references to other sites
that these allowed sites require. Or that i would always know what they where
for that matter. Here is a clip from the log file when Mapquest.com was
accessed.

2010.7.12 19:44:33 - 192.168.1.15 http://new.mapquest.com *EXCEPTION* Exception
site match. GET 6793 0 1 200 - -
2010.7.12 19:44:34 - 192.168.1.15
http://vtiles04.mqcdn.com/tiles/std/vx/map?s=29337258
<http://vtiles04.mqcdn.com/tiles/std/vx/map?s=29337258&y=7&x=11> &y=7&x=11
*DENIED* Banned
Regular Expression URL: (/*.com/*) GET 0 0 Banned Regular Expression URLs 1 403
- -
2010.7.12 19:44:34 - 192.168.1.15
http://vtiles04.mqcdn.com/tiles/std/vx/map?s=29337258
<http://vtiles04.mqcdn.com/tiles/std/vx/map?s=29337258&y=6&x=11> &y=6&x=11
*DENIED* Banned
Regular Expression URL: (/*.com/*) GET 0 0 Banned Regular Expression URLs 1 403
- -
2010.7.12 19:44:34 - 192.168.1.15
http://vtiles04.mqcdn.com/tiles/std/vx/map?s=29337258
<http://vtiles04.mqcdn.com/tiles/std/vx/map?s=29337258&y=5&x=11> &y=5&x=11
*DENIED* Banned
Regular Expression URL: (/*.com/*) GET 0 0 Banned Regular Expression URLs 1 403
- -
2010.7.12 19:44:34 - 192.168.1.15
http://vtiles04.mqcdn.com/tiles/std/vx/map?s=29337258
<http://vtiles04.mqcdn.com/tiles/std/vx/map?s=29337258&y=4&x=11> &y=4&x=11
*DENIED* Banned
Regular Expression URL: (/*.com/*) GET 0 0 Banned Regular Expression URLs 1 403
- -
2010.7.12 19:44:34 - 192.168.1.15
http://vtiles01.mqcdn.com/tiles/std/vx/map?s=29337258
<http://vtiles01.mqcdn.com/tiles/std/vx/map?s=29337258&y=7&x=0> &y=7&x=0
*DENIED* Banned
Regular Expression URL: (/*.com/*) GET 0 0 Banned Regular Expression URLs 1 403
- -
2010.7.12 19:44:34 - 192.168.1.15
http://vtiles01.mqcdn.com/tiles/std/vx/map?s=29337258
<http://vtiles01.mqcdn.com/tiles/std/vx/map?s=29337258&y=6&x=0> &y=6&x=0
*DENIED* Banned
Regular Expression URL: (/*.com/*) GET 0 0 Banned Regular Expression URLs 1 403
- -
2010.7.12 19:44:34 - 192.168.1.15
http://vtiles01.mqcdn.com/tiles/std/vx/map?s=29337258
<http://vtiles01.mqcdn.com/tiles/std/vx/map?s=29337258&y=5&x=0> &y=5&x=0
*DENIED* Banned

Is there a way to allow everything on a site that is in the exception list even
the images and data pulled to the allowed site from an external source? I
think i can just add mqcdn.com to the exception list and fix the mapquest.com
problem. but a few of the other sites have data thats pulled from multiple
sources.

Is there a better way to achieve what i am trying to do? or did i possibly make
an error in my theory of banning all allowing only the few sites that are
needed?

Thank you for your time and input,

Richard

________________________________
From: Dave Burkholder <dave@...
<mailto:dave%40thinkwelldesigns.com> >
To: dansguardian@yahoogroups.com <mailto:dansguardian%40yahoogroups.com>
Sent: Mon, July 12, 2010 6:29:56 AM
Subject: RE: [dansguardian] mapquest and google maps

Monitor the log files when you're visiting one of those sites. At the
command line, type in

tail -f /var/log/dansguardian/access.log

then then visit maps.google.com and see what logs get spit out. That will
give us a clue what's happening.

Thanks,

Dave

From: dansguardian@yahoogroups.com <mailto:dansguardian%40yahoogroups.com> 
[mailto:dansguardian@yahoogroups.com <mailto:dansguardian%40yahoogroups.com> ]
On
Behalf Of tbr_random
Sent: Monday, July 12, 2010 1:35 AM
To: dansguardian@yahoogroups.com <mailto:dansguardian%40yahoogroups.com>
Subject: [dansguardian] mapquest and google maps

Hello,

I recently set up a web proxy using Dansguardian and squid on ubuntu 9.10. I
used some regular expressions to block the whole Internet except for a few
sites that i unblocked using the ExceptionSiteList(domains). But i ran in to
a small problem. both maps.google.com and mapquest.com don't function
correctly. Mapquest only loads a line or two of the header text and then
quits. Maps.google.com loads, but when you type in an address and hit the
map button it just sits and hangs. both Google.com and mapquest.com are
listed in the exception list. I cant seem to figure out how to make these
sites load correctly. I looked around on the Internet and didn't run in to
anything helpful. is there something i am over looking?

Thanks,

Richard.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]

Hi all,

First time poster here. We have three DG servers, serving three
different sites. One has stopped working. Here is an excerpt from
/var/log/messages:


Jul 14 08:18:44 north-filter last message repeated 46 times
Jul 14 08:19:54 north-filter last message repeated 32 times
Jul 14 08:21:12 north-filter last message repeated 13 times
Jul 14 08:22:13 north-filter last message repeated 26 times
Jul 14 08:23:14 north-filter last message repeated 1159 times
Jul 14 08:23:31 north-filter last message repeated 545 times
Jul 14 08:23:31 north-filter squid[3432]: Squid Parent: child process
3434 exited with status 0
Jul 14 08:23:31 north-filter dansguardian: Error connecting to proxy
Jul 14 08:23:32 north-filter last message repeated 18 times
Jul 14 08:23:32 north-filter squid[4611]: Squid Parent: child process
4613 started
Jul 14 08:23:32 north-filter dansguardian: Error connecting to proxy
Jul 14 08:24:03 north-filter last message repeated 839 times
Jul 14 08:25:04 north-filter last message repeated 1706 times
Jul 14 08:26:05 north-filter last message repeated 1979 times
Jul 14 08:27:06 north-filter last message repeated 1745 times
Jul 14 08:28:07 north-filter last message repeated 1616 times

I have confirmed squid is indeed running. I've googled but not come up
with anything other than tips pointing to squid not running. This is DG
2.8.0. Any ideas?

Thank you!

Len Bonk
Department of Technology
Community Unit School District 200
(630)682-2478

Hi everyone
I have problem with dansguardian (2.10) with yahoo attachments,
1- i can download yahoo attachments smaller than 3MB but I cant download
attached larger than 4MB.
�
dansguadrian--->squid---->internet
default group only no auth.
i added yahoo.com and its related ip's in the exceptionsitelist file.
�
can someone help me?
�
thanks for all
�




[Non-text portions of this message have been removed]

On Wed, Jul 14, 2010 at 11:31:46AM -0700, salah khater wrote:
> Hi everyone
> I have problem with dansguardian (2.10) with yahoo attachments,
> 1- i can download yahoo attachments smaller than 3MB but I cant download
attached larger than 4MB.
>  
> dansguadrian--->squid---->internet
> default group only no auth.
> i added yahoo.com and its related ip's in the exceptionsitelist file.
>  
> can someone help me?
>  
> thanks for all
>  
>
>


I asked about the same question( ) but didn't get any reply, this is what I do
now:

squid(first instance) --> DG --> squid(second instance)
          |                                   |
          ----------for the yahoo.com domain---



HTH


samlt

What version of Squid are y'all using?
-----------
Doug





On Fri, Jul 16, 2010 at 9:56 AM, SamLT <samuel.lethiec@...> wrote:

>
>
>
> On Wed, Jul 14, 2010 at 11:31:46AM -0700, salah khater wrote:
> > Hi everyone
> > I have problem with dansguardian (2.10) with yahoo attachments,
> > 1- i can download yahoo attachments smaller than 3MB but I cant download
> attached larger than 4MB.
> >
> > dansguadrian--->squid---->internet
> > default group only no auth.
> > i added yahoo.com and its related ip's in the exceptionsitelist file.
> >
> > can someone help me?
> >
> > thanks for all
> >
> >
> >
>
> I asked about the same question( ) but didn't get any reply, this is what I
> do
> now:
>
> squid(first instance) --> DG --> squid(second instance)
> | |
> ----------for the yahoo.com domain---
>
> HTH
>
> samlt
>
>
>


[Non-text portions of this message have been removed]

Compiled dansguardian for IPCop release 1.9.11. When I installed on a production
machine it gave this error. When I switch squid off it runs, however no
blocking.

squid version 2.7stable9-2
I think the problem with dansguardian not squid becouse when bypass dansguardian
the
file downloded normaly.

thank u

--- On Fri, 7/16/10, portglas@... <portglas@...> wrote:

From: portglas@... <portglas@...>
Subject: Re: [dansguardian] yahoo attachment larger than 3MB
To: dansguardian@yahoogroups.com
Date: Friday, July 16, 2010, 8:14 AM

What version of Squid are y'all using?
-----------
Doug





On Fri, Jul 16, 2010 at 9:56 AM, SamLT <samuel.lethiec@...> wrote:

>
>
>
> On Wed, Jul 14, 2010 at 11:31:46AM -0700, salah khater wrote:
> > Hi everyone
> > I have problem with dansguardian (2.10) with yahoo attachments,
> > 1- i can download yahoo attachments smaller than 3MB but I cant download
> attached larger than 4MB.
> >
> > dansguadrian--->squid---->internet
> > default group only no auth.
> > i added yahoo.com and its related ip's in the exceptionsitelist file.
> >
> > can someone help me?
> >
> > thanks for all
> >
> >
> >
>
> I asked about the same question( ) but didn't get any reply, this is what I
> do
> now:
>
> squid(first instance) --> DG --> squid(second instance)
> | |
> ----------for the yahoo.com domain---
>
> HTH
>
> samlt
>
>�
>


[Non-text portions of this message have been removed]



------------------------------------

For unsubscribing, mailing list rules and posting guidelines please see:
http://dansguardian.org/?page=mailinglistYahoo! Groups Links








[Non-text portions of this message have been removed]

Tested with squid3 3.0.STABLE19-1 and squid-3.1.3-2, here is my original
question for more information:
    http://permalink.gmane.org/gmane.comp.web.dansguardian.general/2318


I've actually made good use of the first squid instance, but this bug should
probably be fixed anyway, feel free to ask if you need more information.


On Fri, Jul 16, 2010 at 11:57:52PM -0700, salah khater wrote:
> squid version 2.7stable9-2
> I think the problem with dansguardian not squid becouse when bypass
dansguardian the
> file downloded normaly.
>
> thank u
>
> --- On Fri, 7/16/10, portglas@... <portglas@...> wrote:
>
> From: portglas@... <portglas@...>
> Subject: Re: [dansguardian] yahoo attachment larger than 3MB
> To: dansguardian@yahoogroups.com
> Date: Friday, July 16, 2010, 8:14 AM
>
> What version of Squid are y'all using?
> -----------
> Doug
>
>
>
>
>
> On Fri, Jul 16, 2010 at 9:56 AM, SamLT <samuel.lethiec@...> wrote:
>
> >
> >
> >
> > On Wed, Jul 14, 2010 at 11:31:46AM -0700, salah khater wrote:
> > > Hi everyone
> > > I have problem with dansguardian (2.10) with yahoo attachments,
> > > 1- i can download yahoo attachments smaller than 3MB but I cant download
> > attached larger than 4MB.
> > >
> > > dansguadrian--->squid---->internet
> > > default group only no auth.
> > > i added yahoo.com and its related ip's in the exceptionsitelist file.
> > >
> > > can someone help me?
> > >
> > > thanks for all
> > >
> > >
> > >
> >
> > I asked about the same question( ) but didn't get any reply, this is what I
> > do
> > now:
> >
> > squid(first instance) --> DG --> squid(second instance)
> > | |
> > ----------for the yahoo.com domain---
> >
> > HTH
> >
> > samlt
> >
> > 
> >
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> For unsubscribing, mailing list rules and posting guidelines please see:
> http://dansguardian.org/?page=mailinglistYahoo! Groups Links
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

i dont understand what u were saying Dave

On 7/10/10, Dave Burkholder <dave@...> wrote:
> Back on this subject after a bit of a hiatus.  Here is an example of a site
> I would like to block – http://www.vector-logos.com/mg_goods_ru.htm or
> http://vnemira.ru/a-freeadds/tov but I’m having trouble creating
> phraselists. I copy text from the page, (Знакомства, Russian for
“dating”)
> such as  past it into a phraselist file and get ‘????????’ instead of the
> actual font characters.
>
>
>
> Now whatever is causing this, I don’t know. I thought it’s because my
linux
> firewall distro doesn’t have the font installed. Apparently not… But what
IS
> the problem?
>
>
>
> Thanks,
>
>
> Dave
>
>
>
> From: dansguardian@yahoogroups.com [mailto:dansguardian@yahoogroups.com] On
> Behalf Of deepbassnine
> Sent: Tuesday, June 22, 2010 11:17 AM
> To: dansguardian@yahoogroups.com
> Subject: [dansguardian] Re: Blocking this site
>
>
>
>
>
> --- In dansguardian@yahoogroups.com <mailto:dansguardian%40yahoogroups.com>
> , "Dave Burkholder" <dave@...> wrote:
>>
>> I wasn’t clear; I know I could block the domain. But I want to block
>> that type of content via Phraselists regardless of domain. Is there some
>> way of installing extra font packs for DG? Or am on the wrong trail
>> altogether?
>
> Catching phrases from websites has nothing to do with fonts. Fonts are the
> graphical representation of Characters.
> Interesting for DG is the character encoding, which maps characters to their
> binary representation. Ages ago the most used encoding was simply ASCII, but
> today it's a little more complicated. While many american and european sites
> use ISO-8859-1, the universal UTF-8 encoding gets more and more popular.
> http://cred-fin.ru/ uses UTF-8.
> In general, DG doesn't care about encoding, which can be called a feature,
> not a bug. You can write phraselists in any encoding a site may probably
> use.
> If you wish to block content using different encodings on different sites,
> you have to add the phrases in all possible encodings to the appropriate
> lists.
> In this example, http://cred-fin.ru/, you just have to make sure, your
> russian phraselists are UTF-8 encoded (as far as I can see, it is a
> financial site, so I don't know, why blocking it at all).
>
> Cheers,
> seBASStian
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>

Dave- Sounds like the text editor you are using won't take those characters.
Maybe try editing the phrase file in a modern text editor that supports the
encoding then upload the file to the dans box.

--
Doug

-----Original Message-----
From: busisiwe myeza siwe <bsmyezas@...>
Date: Monday, Jul 19, 2010 10:35 am
Subject: Re: [dansguardian] Re: Blocking this site
To: dansguardian@...: dansguardian@yahoogroups.com



i dont understand what u were saying Dave

  On 7/10/10, Dave Burkholder <dave@...> wrote:
> Back on this subject after a bit of a hiatus.  Here is an example of a site
> I would like to block  -  http://www.vector-logos.com/mg_goods_ru.htm or
> http://vnemira.ru/a-freeadds/tov but I - m having trouble creating
> phraselists. I copy text from the page, (Знакомства, Russian for  -
dating - )
> such as  past it into a phraselist file and get  - ????????’ instead of the
> actual font characters.
>
>
>
> Now whatever is causing this, I don - t know. I thought it’s because my
linux
> firewall distro doesn - t have the font installed. Apparently not... But what
IS
> the problem?
>
>
>
> Thanks,
>
>
> Dave
>
>
>
> From: dansguardian@yahoogroups.com [mailto:dansguardian@yahoogroups.com] On
> Behalf Of deepbassnine
> Sent: Tuesday, June 22, 2010 11:17 AM
> To: dansguardian@yahoogroups.com
> Subject: [dansguardian] Re: Blocking this site
>
>
>
>
>
> --- In dansguardian@yahoogroups.com <mailto:dansguardian%40yahoogroups.com>
> , 'Dave Burkholder' <dave@...> wrote:
>>
>> I wasn�€™t clear; I know I could block the domain. But I want to block
>> that type of content via Phraselists regardless of domain. Is there some
>> way of installing extra font packs for DG? Or am on the wrong trail
>> altogether?
>
> Catching phrases from websites has nothing to do with fonts. Fonts are the
> graphical representation of Characters.
> Interesting for DG is the character encoding, which maps characters to their
> binary representation. Ages ago the most used encoding was simply ASCII, but
> today it's a little more complicated. While many american and european sites
> use ISO-8859-1, the universal UTF-8 encoding gets more and more popular.
> http://cred-fin.ru/ uses UTF-8.
> In general, DG doesn't care about encoding, which can be called a feature,
> not a bug. You can write phraselists in any encoding a site may probably
> use.
> If you wish to block content using different encodings on different sites,
> you have to add the phrases in all possible encodings to the appropriate
> lists.
> In this example, http://cred-fin.ru/, you just have to make sure, your
> russian phraselists are UTF-8 encoded (as far as I can see, it is a
> financial site, so I don't know, why blocking it at all).
>
> Cheers,
> seBASStian
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>

How to use squid to� assign qouta for subnet.
I have 3 subnets and I want to give each subnet qouta,
ex: subnet1 have quota 20GB for week
�subnet2 have 30Gb per week
�subnet3 have 25GB per month

thanks for all






[Non-text portions of this message have been removed]

i recently purchased a small asus netbook and the previous owner said it was
only used once and it was still in box, unfortunately for me i dont think
this was true. with your very strong filtering i can't search anything
without it blocking me and calling it pornography. this is great for kids
but not me. please help me find out how to remove this filtering program. my
name is brandon, thankyou. ps--someone named jason was already signed in to
your mailing list members area on yahoo when i was linked.


[Non-text portions of this message have been removed]

If you want to shut dansguardian off you can type this in the command line.
"sudo /etc/init.d/dansguardian stop" with out the quotes. I am assuming your
running Linux and dans guardian is installed locally. You can also unset the
proxy in your webbrowser so that it doesn't go through dansguardian.

Richard Parkins IV
Founder/CEO Parkins Research Group PRG
ParkinsSecurity.com
CHECK OUT:
Http://rateMybeggar.com
Http://parkinssecurity.com


Sent from my iPhone

On Jul 21, 2010, at 10:11 AM, brandon Shokoohee <brandonlhc@...> wrote:

> i recently purchased a small asus netbook and the previous owner said it was
> only used once and it was still in box, unfortunately for me i dont think
> this was true. with your very strong filtering i can't search anything
> without it blocking me and calling it pornography. this is great for kids
> but not me. please help me find out how to remove this filtering program. my
> name is brandon, thankyou. ps--someone named jason was already signed in to
> your mailing list members area on yahoo when i was linked.
>
> [Non-text portions of this message have been removed]
>
>


[Non-text portions of this message have been removed]

thank you but i am very computer declined. i have always ran windows, i am
not familiar with linux. i cant find the "command line" to type the info you
gave me, also i can't locate proxy settings in my browser. your help is
appreciated.


On Wed, Jul 21, 2010 at 12:41 PM, Richard Parkins IV
<tbr_random@...>wrote:

>
>
> If you want to shut dansguardian off you can type this in the command line.
> "sudo /etc/init.d/dansguardian stop" with out the quotes. I am assuming your
> running Linux and dans guardian is installed locally. You can also unset the
> proxy in your webbrowser so that it doesn't go through dansguardian.
>
> Richard Parkins IV
> Founder/CEO Parkins Research Group PRG
> ParkinsSecurity.com
> CHECK OUT:
> Http://rateMybeggar.com
> Http://parkinssecurity.com
>
> Sent from my iPhone
>
>
> On Jul 21, 2010, at 10:11 AM, brandon Shokoohee
<brandonlhc@...<brandonlhc%40gmail.com>>
> wrote:
>
> > i recently purchased a small asus netbook and the previous owner said it
> was
> > only used once and it was still in box, unfortunately for me i dont think
> > this was true. with your very strong filtering i can't search anything
> > without it blocking me and calling it pornography. this is great for kids
> > but not me. please help me find out how to remove this filtering program.
> my
> > name is brandon, thankyou. ps--someone named jason was already signed in
> to
> > your mailing list members area on yahoo when i was linked.
> >
> > [Non-text portions of this message have been removed]
> >
> >
>
> [Non-text portions of this message have been removed]
>
>
>


[Non-text portions of this message have been removed]

> On Jul 21, 2010, at 10:11 AM, brandon Shokoohee
<brandonlhc@...<brandonlhc%40gmail.com>>
> wrote:
>
> > i recently purchased a small asus netbook and the previous owner said it
> was
> > only used once and it was still in box, unfortunately for me i dont
think
> > this was true. with your very strong filtering i can't search anything
> > without it blocking me and calling it pornography. this is great for
kids
> > but not me. please help me find out how to remove this filtering
program.
> my
> > name is brandon, thankyou.


http://www.woot.com/Forums/ViewPost.aspx?PostID=3386230
<http://www.woot.com/Forums/ViewPost.aspx?PostID=3386230&PageIndex=13&ReplyC
ount=529#post3396365> &PageIndex=13&ReplyCount=529#post3396365

So, let's summarize how to remove dansguardian from our EEEs:

Ctrl-Alt-T gets you a terminal.

sudo dpkg --purge dansguardian squid squid-common That will get rid of the
offending packages + configuration.

sudo rm /etc/policycontrol/firewall.conf and reboot.

That will get rid of the system forcing you through the (now missing) proxy.