Hello All! I have an idea converting lazer cutter into 3D metal printer or anything melt in heat with lazer light. is that good idea? or 3 axis simple router...
Someone has made the same 3d printer using the same process that zcorp uses, but instead of using the binder on the cartridge they mixed it with the powder and...
So im trying to figure out what I can use that will come close to matching my INK In trying to find something with a surface tension of around 42,00mN/m and A...
HELP Me Please!!!! Im green as they come with programming, i connected the programmer which i purchased online, plugged in my chip, in BASCOM-AVR opened up ...
I eventually found my programmer in the list, connected it all up best i can tell, hit the switch...... nothing. I think when i get some more time ill draw...
Most inkjet printers have only 1 black and 3 colors = 4 colors. But for 3D color prints we need additional clear ink. So what should we do? Looking for...
I'm using 2.5 amps per fase step drives running at 1/2step , I've made my own step drives based on a3977 chip. motors I'm using right now are vextra size 23...
There are many very good inputs here I am reading, thinking, and planning... One issue that I have not seen any comment on and I wonder how it is handled: In a...
Hello, I'm building a 3D printer for my final year at uni and had a couple of question I hope you guys could answer: - Most modern printers use DC motors with...
http://tech.groups.yahoo.com/group/diy_3d_printing_and_fabrication/files /Project1%20Source%20English/ I'm hoping it's helpful for those who can code, but...
Has anyone considered using cement powder for building, it has built in hardening ability and you may be able to cast metals directly into it. It may be useful...
OK heres my idea/question What about those All In One Printer/Scanners Heres what I'm thinking. It already has a scanner inside running off the same...
General question to all, If im using the paper feed stepper to advance the print gantry as directed by the printers circuitboard, is there any problem with ...
hi to all, im new at this group. just jumping in the conversation.... anyone has tried/consider use a toner cartdrige to deliver the powder to the printing...
Is it possible to create a Universal Program to import models and print them on all machines? How I see The program. You Open it. Click on "File" Click on...
2. My search for the correct material and binder mix gave me this + Ra Posted by: "gotmeaname" gotmeaname@... gotmeaname Date: Thu Nov 13, 2008 7:57 am...
I did play with some of the stuff mentioned here, but nothing did work ok. I did mix some PVA with plaster and it does't help at all no strength increase on...
Plaster types- Ultra Cal 30, Hydro Stone, Plaster of Paris. ... Water Soluble Adhesive (Binder) 3 to 20 parts by weight anywhere from 3 to 20 parts "Polyvinl...
To All: This a bit off topic, however, I would like to propose the establishment of a web page/wiki for those individuals who are actively working on a...
Hi at all, i am Rai from Germany (sorry if i wrote a bad english) I found this group just today, but i worked since a few months, independent and without...
Hello all, I am new to the group and appreciate all the hard work that has been shared here. Me and a friend will be building a pair of matching machines here...
Using a Lexmark 715Printer (USB printer) Xylotex Servo Controller Under Ubuntu over Parallel port Its a work in progress right now with any luck we will get...
I'm a CGI modeler and real world sculptor. I really want to build an RP machine so I can make real world objects from my digital creations. I found this site...
Hi! I would like to share my new 3D printer project (codename: Solid Avenger): http://projects.altronix.se/#6.7 Any comments and suggestions are welcome, there...
Just saw this and thought it might interest the group: <http://blog.makezine.com/archive/2008/10/print_3d_objects_from_goo.html?CMP=OTC-0D6B48984890>...
