This is a list of factors expected to affect how fuel line magnets can be used. This info will change over time..... 1) what affects the fuel in the line is...
diy_magnet_use@yahoog...
Jun 1, 2006 12:25 pm
210
This is a FAQ for the DIY magnet use group at....http://groups.yahoo.com/group/diy_magnet_use/ It will be modified over time as new ideas and info become ...
diy_magnet_use@yahoog...
Jun 1, 2006 12:25 pm
211
Might finally have the raw gas issue solved. Seems to happen mostly when the car is started up cold...run for a minute or so and then shut off and allowed to...
This is a 6 month report on the results of using magnets on water lines. Generally I have some neo magnets on the main water line (copper) and some extra...
This is a list of factors expected to affect how fuel line magnets can be used. This info will change over time..... 1) what affects the fuel in the line is...
diy_magnet_use@yahoog...
Jul 1, 2006 10:17 am
214
This is a FAQ for the DIY magnet use group at....http://groups.yahoo.com/group/diy_magnet_use/ It will be modified over time as new ideas and info become ...
diy_magnet_use@yahoog...
Jul 1, 2006 10:17 am
215
Currently running 2 different tests on two cars. * testing an FA2000 clone on a 3L V6 EFI...along with an EFIE. Finally seem to have the fuel overload issue...
My work is getting rid of about 30 HD's and all have to be destroyed. I told the guy that is destroying then to save me the magnets. I now have about 8 sets of...
The first tank results for the Condensator are in. Got 38.8 mpg vs ~30 mpg for summer without fuel heat. A gain of around 29%. Looking good. Redid my V6...
This is a list of factors expected to affect how fuel line magnets can be used. This info will change over time..... 1) what affects the fuel in the line is...
diy_magnet_use@yahoog...
Aug 1, 2006 10:58 am
221
This is a FAQ for the DIY magnet use group at....http://groups.yahoo.com/group/diy_magnet_use/ It will be modified over time as new ideas and info become ...
diy_magnet_use@yahoog...
Aug 1, 2006 10:58 am
222
Im running on a small 1.3l gasoline engine. I have 3 pairs of magnets strapped on the line. My qns is, have anyone tried different orientation of pole and...
I tend to use sets of single magnets with S poles towards the fuel line...and with single magnet N poles mounted on the air intakes. As I recall...I tested...
i believe your direction is to get different magnetic charges on both the fuel and air. So that they can "attract" better in the combustion chamber. Hmm..i did...
I have goods news and I have bad news: Bad news...over 327 miles I "used" 11.5 gallons = 28.4 mpg. Good news...if I avg this with the last tank at 38.84...
http://news.yahoo.com/s/nm/20060817/sc_nm/technology_energy_dc_1 "DUBLIN (Reuters) - An Irish technology firm issued a challenge to the world's scientific...
You can find MANY explanations as to how fuel line magnets work in the patents and on the pages of the sites selling magnets. Unless you have knowledge of...
3 tank avg for the Condensator is in: tank 1....38.8 mpg < likely a fill where it shut off too soon? tank 2....28.4 < extra gas added to make up for previous...
This is a FAQ for the DIY magnet use group at....http://groups.yahoo.com/group/diy_magnet_use/ It will be modified over time as new ideas and info become ...
diy_magnet_use@yahoog...
Sep 1, 2006 10:05 am
231
This is a list of factors expected to affect how fuel line magnets can be used. There are many ASSUMPTIONS made here as far as what affects what and so...
diy_magnet_use@yahoog...
Sep 1, 2006 10:05 am
232
Test Drive The New Fivs Gen IV go to www.get113to138mpg.com and sign up for a free test drive in a 1983 Olds, or 1996 Buick 1983 olds gets 109 mpg hy. The...
Hello Allen, Nice to see you still around! I had intended on calling you again but things just hasn't worked out for me to. I still need you to explain to me...
After moving the PCV valve so it was between the vaporizer and the valve cover...I got a lower mpg result...probably due to more gas being pulled into the...
I still might try setting the gas flow down as much as possible and try this again...also will use larger ID hoses going to the vaporizer. This setup will...
For most cars...a pint pickle jar works pretty well. Just need a metal lid that has the rubber seal in it. I use a tapered puch to put two holes in the...
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the diy_magnet_use group. File : /DIY PCV...
diy_magnet_use@yahoog...
Sep 15, 2006 1:16 pm
239
Brand new...really new...spanking brand new...ACTIVITY. Houston...we HAVE activity!...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
