>> I thought that limit was only to the OS.Thanks anyway.

Keith

--- In dogwaffle@yahoogroups.com, "staigermanus" <philip@...> wrote:
>
> PD Pro is a 32-bit application. I think you'll be able to have it go up to
around 3 to 3.2 GB
>
> Run the Task Manager and follow the memory usage of the process to see how it
adds up for 1000 frames, 1500 frames, 2000 etc...
>
> -Philip
>
>
>
> --- In dogwaffle@yahoogroups.com, "keith" <kavlor2003@> wrote:
> >
> > Just upgraded to 12 GB on WinXP 64bit Proffesional,had 6 GB previously.I
expected to be able to have twice as many frames loaded in memory but doesn't
seem to give me any more.At 640*480 I can get about 2400 frames before I get
'can't create anim'.Out of curiosity I ran a 2nd instance of Howler and was able
to create 2000 frames so that is 4400 frames between the 2 instances yet I can't
create that in just one instance alone.
> >
> > I have a AMD Phenom II x4 925 2.79 Ghz if thats any help.
> >
>

Since PD Pro is a 32-bit application, you're going to run into memory
limits no matter how much RAM you install.  You could try Large Address
Aware (http://www.techpowerup.com/forums/showthread.php?t=112556), which is
a good freeware application to help with this issue.  I haven't used it
with PD Pro, but I've successfully used it with Bryce 7.  This should allow
PD Pro to access up to 4 GB of RAM.  Since you've got 12 GB & WinXP-64,
you'll still have plenty left to run the OS.

--Charlie

On Tue, Mar 27, 2012 at 11:54 AM, staigermanus <philip@...>wrote:

> **
>
>
> PD Pro is a 32-bit application. I think you'll be able to have it go up to
> around 3 to 3.2 GB
>
> Run the Task Manager and follow the memory usage of the process to see how
> it adds up for 1000 frames, 1500 frames, 2000 etc...
>
> -Philip
>
>
> --- In dogwaffle@yahoogroups.com, "keith" <kavlor2003@...> wrote:
> >
> > Just upgraded to 12 GB on WinXP 64bit Proffesional,had 6 GB previously.I
> expected to be able to have twice as many frames loaded in memory but
> doesn't seem to give me any more.At 640*480 I can get about 2400 frames
> before I get 'can't create anim'.Out of curiosity I ran a 2nd instance of
> Howler and was able to create 2000 frames so that is 4400 frames between
> the 2 instances yet I can't create that in just one instance alone.
> >
> > I have a AMD Phenom II x4 925 2.79 Ghz if thats any help.
> >
>
>
>


[Non-text portions of this message have been removed]

We're already using "large address aware".  So the application is able to access
4 gigs, however note that any one block of memory in the program is still
limited to 2 gigs, so animations will top out at 2 gigs, while the program will
still be able to use more than that.




> Since PD Pro is a 32-bit application, you're going to run into memory
> limits no matter how much RAM you install.  You could try Large Address
> Aware (http://www.techpowerup.com/forums/showthread.php?t=112556), which is
> a good freeware application to help with this issue.  I haven't used it
> with PD Pro, but I've successfully used it with Bryce 7.  This should allow
> PD Pro to access up to 4 GB of RAM.  Since you've got 12 GB & WinXP-64,
> you'll still have plenty left to run the OS.
>
> --Charlie
>
> On Tue, Mar 27, 2012 at 11:54 AM, staigermanus <philip@...>wrote:
>
> > **
> >
> >
> > PD Pro is a 32-bit application. I think you'll be able to have it go up to
> > around 3 to 3.2 GB
> >
> > Run the Task Manager and follow the memory usage of the process to see how
> > it adds up for 1000 frames, 1500 frames, 2000 etc...
> >
> > -Philip
> >
> >
> > --- In dogwaffle@yahoogroups.com, "keith" <kavlor2003@> wrote:
> > >
> > > Just upgraded to 12 GB on WinXP 64bit Proffesional,had 6 GB previously.I
> > expected to be able to have twice as many frames loaded in memory but
> > doesn't seem to give me any more.At 640*480 I can get about 2400 frames
> > before I get 'can't create anim'.Out of curiosity I ran a 2nd instance of
> > Howler and was able to create 2000 frames so that is 4400 frames between
> > the 2 instances yet I can't create that in just one instance alone.
> > >
> > > I have a AMD Phenom II x4 925 2.79 Ghz if thats any help.
> > >
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>

I've uploaded another example with motion prediction, this one is slow motion on
headshots.

http://www.youtube.com/watch?v=wrLuRM46lzI


I also noticed this announcement:

Did you just upload an original short film, web-series episode or television
pilot? It may be eligible for Your Film Festival, a global competition to find
the world's best storytellers. Click here to learn more about how you could win
$500,000 to work with Ridley Scott and Michael Fassbender on your next project.

The 'click here' links points to this:
http://www.youtube.com/yourfilmfestival?feature=inp-up-yff

Good luck to you if you participate, and may the odds be ever in your favor, or
something like that :-)

I seem to remember that Philip once mentioned the Google Art Project
here. Anyway, I take at least him for interested.

The Google Art Project is a project to show the collections of museums
(and part of the White House) on the Web in high detail.

Being Dutch myself:

Currently six Dutch museums participate, as well as the Koninklijk
Paleis (Royal Palace) at Amsterdam (orginally the Town Hall).
It is among the places that you can virtually walk around in or
straightly look at the works of art.

Hope you'll find it inspiring.  :-)

<http://www.googleartproject.com/>

The Night Watch:
<http://www.googleartproject.com/collection/rijksmuseum/artwork/officers-and-oth\
er-civic-guardsmen-of-district-ii-of-amsterdam-under-the-command-of-captain-fran\
s-banninck-cocq-andlieutenant-willem-van-ruytenburch-known-as-the-night-watch-re\
mbrandt-harmensz-van-rijn/326424/>
(Yes, it's a large painting...)

--
Chris Laarman

claudio castelli wants you to try Dropbox! Dropbox lets you bring all your
photos, docs and videos with you anywhere and share them easily.

Get started here:
http://www.dropbox.com/link/20.TCP0kVKqWV/NjE4Mzg1MTk0Njc?src=referrals_bulk9&eh\
=d9acff2

- The Dropbox Team

____________________________________________________
To stop receiving invites from Dropbox, please go to
http://www.dropbox.com/bl/e6cd583338f1/dogwaffle%40yahoogroups.com

[Non-text portions of this message have been removed]

If you'd like to draw a famous character, here's a challenge:

http://ecaricatures.proboards.com/index.cgi?board=challenge&action=display&threa\
d=2989&page=1


happy drawing and waffling!

I have posted a few images that show new brush effects under development.

https://www.dropbox.com/gallery/8120854/1/DogwafflePreviews?h=ad1712

Some will create effects similar of an effect seen in Penny. Another is a
Gouache post effect.

stay tuned for more.

We are currently offering a special deal on PD Pro Howler 7.2 in order to raise
funds to replace some broken equipment. PD Pro howler 7.2 is our latest paint
application with new motion module for creating slow motion video from regular
video, multiple monitor support, image stabilization, rotoscoping and other new
features. We would like to sell up to 10 copies at $70 (regularly $139)

The offer can be found here http://www.wix.com/dan_ritchie/howlerpromotion

For more details on Howler, visit http://www.thebest3d.com/

http://www.youtube.com/watch?v=3MIdbfjEb90

this shows using the motion prediction module on a 3D logo

If you own PD Artist 7.1, you'll receive a free update to 7.2 just for asking.
Email me at dogwaffle@...

If you own 6.x and ordered it at DAZ there's also a special treat, fre upgrade
to v7 (we don't have v7 on the Daz store, we have v6 there, at the price of v7).
Long story....


Here's more news:

http://www.thebest3d.com/dogwaffle/newsletter/  look for --> #33

We're excited about what's next: Project "Broomhead" - take a peek and a few
teasers.

And there's a new video tutorial, another  motion prediction example, over a 3D
Logo.

There's also a promo on Artist and Howler through the end of the month, $20 off,
no coupons needed.

Happy painting and waffling!
(it's so cold today, I can barely move my fingers to type this :-)

Just curious if any wafflers here are also using Postworkshop, and have version
3?

http://thebest3d.com/postworkshop/index.html

Would love to have samples, feedback, testimonials of using the two together.

Happy filtering and painting!


-Philip

If you want to save a lot on a copy of Howler and help with developement
http://www.wix.com/dan_ritchie/howlerpromotion

I admit that 70 USD is quite a bargain, but are you prepared to shave
off at least a symbolic amount for an upgrade from Howler 6?

Vic

At 00:44 18/04/2012, you wrote:
>
>
>
>If you want to save a lot on a copy of Howler and help with
>developement
><http://www.wix.com/dan_ritchie/howlerpromotion>http://www.wix.com/dan_ritchie/\
howlerpromotion

You can do slightly better if you have v6 already. We offer a 70% discount
coupon. However, when you order from this special promo at Wix you'll know that
100% of the funds go to Dan for helping in the development. It's a good feeling
;-)

Either way, thanks for waffling!



--- In dogwaffle@yahoogroups.com, Vic Joseph <vic_ngreply@...> wrote:
>
> I admit that 70 USD is quite a bargain, but are you prepared to shave
> off at least a symbolic amount for an upgrade from Howler 6?
>
> Vic
>
> At 00:44 18/04/2012, you wrote:
> >
> >
> >
> >If you want to save a lot on a copy of Howler and help with
> >developement
>
><http://www.wix.com/dan_ritchie/howlerpromotion>http://www.wix.com/dan_ritchie/\
howlerpromotion
>

i would also be interested in an upgrade price for version 6, which I bought
just before ver 7's started coming out(Oct or Nov ??)

--- In dogwaffle@yahoogroups.com, Vic Joseph <vic_ngreply@...> wrote:
>
> I admit that 70 USD is quite a bargain, but are you prepared to shave
> off at least a symbolic amount for an upgrade from Howler 6?
>
> Vic
>
> At 00:44 18/04/2012, you wrote:
> >
> >
> >
> >If you want to save a lot on a copy of Howler and help with
> >developement
>
><http://www.wix.com/dan_ritchie/howlerpromotion>http://www.wix.com/dan_ritchie/\
howlerpromotion
>

Let's see, if I calculated that right, it should be around $42 for the upgrade
from 6 to 7.2, which is a bit lower than our regular upgrade price anyway.

Well, anyway, contact Phillip at dogwaffle@... for a discount coupon code.


--- In dogwaffle@yahoogroups.com, "staigermanus" <philip@...> wrote:
>
> You can do slightly better if you have v6 already. We offer a 70% discount
coupon. However, when you order from this special promo at Wix you'll know that
100% of the funds go to Dan for helping in the development. It's a good feeling
;-)
>
> Either way, thanks for waffling!
>
>
>
> --- In dogwaffle@yahoogroups.com, Vic Joseph <vic_ngreply@> wrote:
> >
> > I admit that 70 USD is quite a bargain, but are you prepared to shave
> > off at least a symbolic amount for an upgrade from Howler 6?
> >
> > Vic
> >
> > At 00:44 18/04/2012, you wrote:
> > >
> > >
> > >
> > >If you want to save a lot on a copy of Howler and help with
> > >developement
> >
><http://www.wix.com/dan_ritchie/howlerpromotion>http://www.wix.com/dan_ritchie/\
howlerpromotion
> >
>

Thanks Dan. Unfortunately my message to Phillip bounced:

----- The following addresses had permanent fatal errors -----
<dogwaffle@...>
      (reason: 554 delivery error: dd This user doesn't have a
yahoo.com account (dogwaffle@...)

Vic


At 02:49 19/04/2012, you wrote:
>
>
>Let's see, if I calculated that right, it should be around $42 for
>the upgrade from 6 to 7.2, which is a bit lower than our regular
>upgrade price anyway.
>
>Well, anyway, contact Phillip at
><mailto:dogwaffle%40yahoo.com>dogwaffle@... for a discount coupon code.
>
>--- In
><mailto:dogwaffle%40yahoogroups.com>dogwaffle@yahoogroups.com,
>"staigermanus" <philip@...> wrote:
> >
> > You can do slightly better if you have v6 already. We offer a 70%
> discount coupon. However, when you order from this special promo at
> Wix you'll know that 100% of the funds go to Dan for helping in the
> development. It's a good feeling ;-)
> >
> > Either way, thanks for waffling!
> >

Do you know the word, Emanata?



I expect there will be quite a few among my friends who will know it.



But if you do not, scroll all the way down and I have some links to the
better definitions.



Enjoy!



DrEddie

























(Look down here!)









http://en.wikipedia.org/wiki/The_Lexicon_of_Comicana



http://nancyfriedman.typepad.com/away_with_words/2008/07/word-of-the-week-em
anata.html



http://the-euclidean-fly.blogspot.com/2011/12/emanata.html





[Non-text portions of this message have been removed]

The address dogwaffle@... won't accept mail (from me, at
least), so I'll try putting this request on the forum. If I've
understood Dan correctly, I can get a discount code for Wix.
@Phillip: Will you please mail me the code?

friendly regards,
Vic Joseph

At 02:49 19/04/2012, you wrote:
>
>
>Let's see, if I calculated that right, it should be around $42 for
>the upgrade from 6 to 7.2, which is a bit lower than our regular
>upgrade price anyway.
>
>Well, anyway, contact Phillip at
><mailto:dogwaffle%40yahoo.com>dogwaffle@... for a discount coupon code.
>
>--- In
><mailto:dogwaffle%40yahoogroups.com>dogwaffle@yahoogroups.com,
>"staigermanus" <philip@...> wrote:
> >
> > You can do slightly better if you have v6 already. We offer a 70%
> discount coupon. However, when you order from this special promo at
> Wix you'll know that 100% of the funds go to Dan for helping in the
> development. It's a good feeling ;-)
> >
> > Either way, thanks for waffling!
> >
> >

Hi. The email address was incorrect. It is dogwaffle@... not
@yahoo.com

I also sent you a message through the groupmail. Contact me if you have further
questions.

-Philip



--- In dogwaffle@yahoogroups.com, Vic Joseph <vic_ngreply@...> wrote:
>
> The address dogwaffle@... won't accept mail (from me, at
> least), so I'll try putting this request on the forum. If I've
> understood Dan correctly, I can get a discount code for Wix.
> @Phillip: Will you please mail me the code?
>
> friendly regards,
> Vic Joseph
>
> At 02:49 19/04/2012, you wrote:
> >
> >
> >Let's see, if I calculated that right, it should be around $42 for
> >the upgrade from 6 to 7.2, which is a bit lower than our regular
> >upgrade price anyway.
> >
> >Well, anyway, contact Phillip at
> ><mailto:dogwaffle%40yahoo.com>dogwaffle@... for a discount coupon code.
> >
> >--- In
> ><mailto:dogwaffle%40yahoogroups.com>dogwaffle@yahoogroups.com,
> >"staigermanus" <philip@> wrote:
> > >
> > > You can do slightly better if you have v6 already. We offer a 70%
> > discount coupon. However, when you order from this special promo at
> > Wix you'll know that 100% of the funds go to Dan for helping in the
> > development. It's a good feeling ;-)
> > >
> > > Either way, thanks for waffling!
> > >
> > >
>

Hi Philip,

Thank you but I do not  subscribe to Yahoo! Mail.
Would you be so kind as to send your message to
my own email address (i.e. reply to this message).

regards, Vic


At 22:21 19/04/2012, you wrote:
>
>
>Hi. The email address was incorrect. It is
><mailto:dogwaffle%40thebest3d.com>dogwaffle@... not @yahoo.com
>
>I also sent you a message through the groupmail.
>Contact me if you have further questions.
>
>-Philip
>
>--- In
><mailto:dogwaffle%40yahoogroups.com>dogwaffle@yahoogroups.com,
>Vic Joseph <vic_ngreply@...> wrote:
> >
> > The address dogwaffle@... won't accept mail (from me, at
> > least), so I'll try putting this request on the forum. If I've
> > understood Dan correctly, I can get a discount code for Wix.
> > @Phillip: Will you please mail me the code?
> >
> > friendly regards,
> > Vic Joseph
> >
> > At 02:49 19/04/2012, you wrote:
> > >
> > >
> > >Let's see, if I calculated that right, it should be around $42 for
> > >the upgrade from 6 to 7.2, which is a bit lower than our regular
> > >upgrade price anyway.
> > >
> > >Well, anyway, contact Phillip at
> > ><mailto:dogwaffle%40yahoo.com>dogwaffle@... for a discount coupon code.
> > >
> > >--- In
> > ><mailto:dogwaffle%40yahoogroups.com><mailto:d
> ogwaffle%40yahoogroups.com>dogwaffle@yahoogroups.com,
> > >"staigermanus" <philip@> wrote:
> > > >
> > > > You can do slightly better if you have v6 already. We offer a 70%
> > > discount coupon. However, when you order from this special promo at
> > > Wix you'll know that 100% of the funds go to Dan for helping in the
> > > development. It's a good feeling ;-)
> > > >
> > > > Either way, thanks for waffling!
> > > >
> > > >
> >
>
>

Yeah, I didn't think this went through Yahoo mail, just the mail interface in
yahoogroups that lets you send a message directly to someone in the group to
their respective email address on record in the group subscription.

No worries. I found the same you have here in BMT from your original v4 upgrade
years back and a different email address from your Howler 1 order. I sent the
coupon to both. I hope you get them this time, one way or another. Let me know
if not.

-Philip


--- In dogwaffle@yahoogroups.com, Vic Joseph <vic_ngreply@...> wrote:
>
> Hi Philip,
>
> Thank you but I do not  subscribe to Yahoo! Mail.
> Would you be so kind as to send your message to
> my own email address (i.e. reply to this message).
>
> regards, Vic
>
>
> At 22:21 19/04/2012, you wrote:
> >
> >
> >Hi. The email address was incorrect. It is
> ><mailto:dogwaffle%40thebest3d.com>dogwaffle@... not @yahoo.com
> >
> >I also sent you a message through the groupmail.
> >Contact me if you have further questions.
> >
> >-Philip
> >
> >--- In
> ><mailto:dogwaffle%40yahoogroups.com>dogwaffle@yahoogroups.com,
> >Vic Joseph <vic_ngreply@> wrote:
> > >
> > > The address dogwaffle@ won't accept mail (from me, at
> > > least), so I'll try putting this request on the forum. If I've
> > > understood Dan correctly, I can get a discount code for Wix.
> > > @Phillip: Will you please mail me the code?
> > >
> > > friendly regards,
> > > Vic Joseph
> > >
> > > At 02:49 19/04/2012, you wrote:
> > > >
> > > >
> > > >Let's see, if I calculated that right, it should be around $42 for
> > > >the upgrade from 6 to 7.2, which is a bit lower than our regular
> > > >upgrade price anyway.
> > > >
> > > >Well, anyway, contact Phillip at
> > > ><mailto:dogwaffle%40yahoo.com>dogwaffle@ for a discount coupon code.
> > > >
> > > >--- In
> > > ><mailto:dogwaffle%40yahoogroups.com><mailto:d
> > ogwaffle%40yahoogroups.com>dogwaffle@yahoogroups.com,
> > > >"staigermanus" <philip@> wrote:
> > > > >
> > > > > You can do slightly better if you have v6 already. We offer a 70%
> > > > discount coupon. However, when you order from this special promo at
> > > > Wix you'll know that 100% of the funds go to Dan for helping in the
> > > > development. It's a good feeling ;-)
> > > > >
> > > > > Either way, thanks for waffling!
> > > > >
> > > > >
> > >
> >
> >
>

If you haven't seen Leaftracker's blog yet, full of Dogwaffle painting, enjoy
the latest, Summer Place.

http://leaftracker.blogspot.com/

Help me identify which filters are showing a seam (or more than one) down the
middle of an image when processing frames on the timeline (as seen in the
seam.avi video in the beta dropobox area.

Sorry, those last few messages were aimed at the beta list

I have created a new folder where we'll occasionally show new pictures made with
Broomhead

https://www.dropbox.com/gallery/8120854/1/Broomhead?h=f9a877

Nice work Philip! I had fun with Spherize when I first started
waffling (I think it was version 2). But the results were always
spoiled because it clips a bit off the top and the bottom of the
sphere. I hope you'll correct that soon.
regards, Vic

At 06:07 4-5-2012, you wrote:
>
>
>I have created a new folder where we'll occasionally show new
>pictures made with Broomhead
>
><https://www.dropbox.com/gallery/8120854/1/Broomhead?h=f9a877>https://www.dropb\
ox.com/gallery/8120854/1/Broomhead?h=f9a877
>

we're working on it. Well, Dan is. I'm the one who gets to drool before anyone
else :-)



--- In dogwaffle@yahoogroups.com, Vic Joseph <vic_ngreply@...> wrote:
>
> Nice work Philip! I had fun with Spherize when I first started
> waffling (I think it was version 2). But the results were always
> spoiled because it clips a bit off the top and the bottom of the
> sphere. I hope you'll correct that soon.
> regards, Vic
>
> At 06:07 4-5-2012, you wrote:
> >
> >
> >I have created a new folder where we'll occasionally show new
> >pictures made with Broomhead
> >
>
><https://www.dropbox.com/gallery/8120854/1/Broomhead?h=f9a877>https://www.dropb\
ox.com/gallery/8120854/1/Broomhead?h=f9a877
> >
>

Is anyone having trouble launching the batch browser?  It seems to be missing
from my installer build script.  I don't know if this is a recent beta issue or
if it made it into release builds.