I have not yet seen update information on Vista compatible installation; is this available yet (I have not been able to use Dolphin Cad/Cam since upgrading and...
I have drawn a locomotive wheel and not clear about the way to machine out the spokes ( I have an X3 cnc mill) . Does anybody out there live in or close to...
Hi Wade, I am in County of Somerset UK thanks for your interest Alan In message <005701c853e4$659ac5b0$6401a8c0@lightspeed>, Wade Wendorf <wwendorf@...>...
Alan A few years ago I assisted a customer in machining castings for Locomotive wheels. The spokes were produced by using a combination of Area Clear and...
Can some one explain why select tool is refering to ball nose etc before I select tool Thanks Alan [Non-text portions of this message have been removed]...
Hi While not having used dolphin for a while I noticed that the version has changed and as I am about to move computers I was wondering how do I go about...
... Older versions of PartMaster are not normally available for download. If the computer you are moving to is running Vista you will need PartMaster V10 as no...
Hi John On the Launcher properties it says Version 4.1.222.0 would this be the same version as the program itself? I am not sure what is the latest version I...
I have looked around some to see if anyone has tried to run Partmaster in a Linux operating system. I did not see anything directly saying "yes" or "no". So...
... help. ... Dolphin PartMaster CAD (and other PartMaster modules) only come in Windows flavors (W9x, W2k, WXp and Vista)so if you wanted to try it out on...
For those that might be interested, I'm running PartMaster on a Macintosh that is hosting WXp under Parallels software. It works fine. Cheers, Dave. Re:...
You must define a tool first before selecting or it is going to default to a ball nose. So "Define Tool" and then "Select Tool" I hope this helps. ... before...
Thanks for coming back to me. I am working with version 8, the problem I have is I cant remove the ball nose end mill do you have a contact Tel no Thanks Alan ...
Alan, Where are you located? In the USA or UK? If you are in the UK it is going to be better to get a hold of the Dolphin over there. If you are in the USA...
I posted on CNCZONE.COM about getting some assitance in changing the dimensions in a drawing. I can draw the lines but can't change the dimensions. Support...
I want to draw the set of indexable turning tools that I purchased from enco. I know I had a tutorial for this at one point in time but I cannot seem to find...
I'm making a hole with goround (cutter more than hole size) then putting another hole in the bottom of the previous hole, now if I set worksurface at the...
whoops, think I've cracked it :) the feed change plane wasn't coming up to the rapid traverse plane I had set - Doh! ok, I'm going back in the cupboard now ;) ...
I'm not going completely mad... Feed rate change height is not being consistently taken as the thing/position Feedrate change height in goround is in relation...
I've just started to have a problem when importing a dolphin drawing into CAM, such as modifying a drawing then replacing the existing one in CAM. I now get an...
... drawing into CAM, such as modifying a drawing then replacing the existing one in CAM. ... or never been run on this machine please run partmaster CAD...
... Just checked and similar here with 10.0.1006, I get "cannot find the file specified" followed by "Partmaster CAD is not installed, or has never been run...
Steve I have passed this on, we will get back to you when we can. michael _____ From: dolphincadcam@yahoogroups.com [mailto:dolphincadcam@yahoogroups.com] On...
What is the best way to machine a concave surface over a rectangular area? Using the slot method with a curved profile and a number of slots stepping along the...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
