... One that's good for international work is the Phihong PSC20R-180, takes 100 to 240 VAC and 50 or 60Hz. I think we sell it for $50 (I can check on Monday)...
I have used Jameco p/n 380191, Mean Well GS25U18-P1J switching power supplys for my Dugan E-1's internationally many times in the past 5+ years w/ great...
... Gee, maybe I should sell a plug-in reproducing the awful automatic mixing performance of the Altec 1628. -Dan p.s. if you're anywhere near the Bay Area, do...
For my annual open house, I wanted to demonstrate a prototype of my new Model E-3, an automatic mixing controller designed to be used as an insert to input...
I have 2 MY16 cards in an LS9 (v1.30). The first card reset fine, however the second card always says "Unreachable: NO" and won't take new parameters. I have...
So the Dugan Updater can detect the card. What are the network parameters? After the 3-second Network Reset, did you try power cycling the console and check...
... Sure, you can use split insert cables, what are the connectors on the console end? ... The Model D-2 is balanced analog i/o, but the E-1 with the proper...
... I recommend using a Model D-2. Ask the truck to supply the requisite number of bantam-to-XLR male and female cables. The D-2 has separate processor and...
The router used in the system had an IP address of 192.168.0.1. I did the network reset and power cycle several times, and the card never took any IP Changes....
Hi guys, Just got my E1, set it up according to the manual, actually read it!, and while it seems to be working I'm hearing a noise in the background which...
... I demonstrated my controllers with Cooper mixers at trade shows for many years. Is the noise there in channel bypass? ... Use the Firmware Updater program...
Hi Dan, Thanks for the quick response. No the noise does go away in bypass mode. As a matter of fact to the best of my recollection, of the four channels that...
Please move the channels to 5 to 8 and see if the problem is isolated to 1 and 3. Also please try shuffling the channels to see if the problem always stays...
Out of curiosity Ken, do you have a computer connected to the E-1 when you hear the "cricket" noise? I wonder if you are hearing noise from a laptop power...
Thanks guys, I'll be looking at all of those things today on the job. One thought is that I am powering the E1 from a common sound cart power supply which...
Good news, I now have a beautifully functioning E1, the problem was the power supply. I got on the job this morning and the first thing I did was confirm the...
... Dear Oliver, I haven't a clue. I have no experience with the Mutec converter. The E-1 reacts to loss of digital sync by flashing all the mute buttons, not...
Please download the latest firmware update tool and make sure that the unit has the latest firmware. Can you duplicate the problem consistently? Which sequence...
255
duganusers@yahoogroup...
Mar 29, 2012 4:05 pm
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the duganusers group. File :...
Hi, Thanks a lot for your quick response! I just updated the first unit and will check later if the problem is still there. As I left the second unit as is, I...
Dear Dugan users, We found a bug in the firmware in E-1s no. 417 and higher. Those are the ones with the locking power connector. Bypass buttons don't work...
Minor clarification. The bypass problem happens only if you use the hardware front panel. Bypass works correctly if changed from the Java control panel. Sam ...
Hi Sam, Problem solved! Thanks a lot! After updating the E1 (SN#444) with the latest firmware, everything works just as it should. I left our second unit with...
Oops, the Update Utility is supposed to show your E1 as E1A. Oh well, will fix that in the next release. It should show up as Model-E1A in the new Java control...
New features are added to the E-1A and the Model-MY card. One of the new feature required some explanations before the updated manual is available. This is not...
The GUI seems to be showing the incorrect setting of the Native / Legacy Switch. It shows "Native" mode when the card is physically switched to "Legacy", and...
