Hmm.... there's more than a little hype here...
The input battery voltage (600 volts) dropped 1/10 of a volt _per
battery_ or 30 volts for the overall input voltage. The 5000 watt load
is NOT confirmed, since it ASSUMES that the generator with NO LOAD
consumes 3-4 KW. I don't believe this can be true. If it were true,
where is the 3-4 kW of generator heat going?? I think the generator
specs may be misinterpreted. This is may be due in part to the generator
being spec'ed for a Power Take Off application from an internal
combustion engine as opposed to an electric motor. It will always take a
larger IC engine to drive a generator than a motor - a motor can pull
more power from the line if temporarily overloaded or during startup
and the same thing may be true with Newman's motor with the massive
flywheel and bank of batteries serving as an energy reserve.

-- Bert --

overunity2001 wrote:

> On Saturday, December 13, 2003,
> Joseph Newman publicly demonstrated
> his newest Energy Machine unit in Naples, Florida.
> The results were fantastic!
>
> Joseph Newman demonstrates an
> electromagnetic energy generation system that
> "produces greater external energy output than external energy input".
> SEE IT IN OPERATION FOR YOURSELF
> LINKED TO THE WEBSITE LISTED BELOW!
>
> * * * * * * * * *
> See the latest video of the
> NEWMAN ENERGY MACHINE
> that will turn salt water to fresh water ---
> power homes, factories, ships, trains, planes, vehicles, and cities --
> -
> provide all the world's power supplies and eliminate pollution ---
> and re-charge its own power system at the same time!
>
> The process of going public and into mass world production is now
> underway.
>
> At the top of the website URL provided below, click on the link to
> the free video
> of the latest demonstration of this revolutionary technology:
>
> http://www.josephnewman.com
>
> The video shows the newest 7,000-lb Newman Energy Machine with a 450-
> lb flywheel
> and a 1,250-lb rotor physically connected to the shaft of a
> conventional electric generator
> that subsequently powers lights, televisions, clocks, etc.
>
> Total watts IN: 600 watts.
> Total watts OUT: 5,000+ watts.
>
> During the entire time the system was in operation, the input battery
> voltage
> dropped LESS THAN 1/10TH OF A VOLT!
>
> This technology can now be immediately implemented to power the
> world's energy needs
> and replace ALL conventional energy sources.
>
> * * * * * * * * *
>
> "I cannot conceive curved lines of force
> without the conditions of a PHYSICAL existence in that intermediate
> space."
> --- MICHAEL FARADAY
>
> "How few understand the PHYSICAL lines of force!
> They will not see them, yet all the researches on the subject
> tend to confirm the views I put forth many years since.
> Thompson of Glasgow seems almost the only one who acknowledges them.
> He is perhaps the nearest to understanding what I meant.
> I am content to wait convinced as I am of the truth of my views."
> --- MICHAEL FARADAY
>
>
> "In speaking of the Energy of the field, however,
> I wish to be understood LITERALLY.
> All energy is the same as MECHANICAL ENERGY,
> whether it exists in the form of motion or in that of elasticity, or
> in ANY other form.
> The energy in electromagnetic phenomena is MECHANICAL energy."
> --- JAMES CLERK MAXWELL
>
> "The Theory I propose may ... be called a Theory of the
> Electromagnetic Field
> because it has to do with the space in the neighborhood of the
> electric or magnetic bodies,
> AND IT MAY BE CALLED A DYNAMICAL THEORY, BECAUSE IT ASSUMES THAT
> IN THAT SPACE THERE IS MATTER IN MOTION,
> BY WHICH THE OBSERVED ELECTROMAGNETIC PHENOMENA ARE PRODUCED."
> --- JAMES CLERK MAXWELL
>
> * * * * * * * * *
> http://www.josephnewman.com
>
>
>
>
> To unsubscribe from this group, send an email to:
> free-energy-unsubscribe@yahoogroups.com
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/free-energy/
>
> To unsubscribe from this group, send an email to:
> free-energy-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
> .
>