Some of the St701's focus screen is NOT splitting, it is the micro prism format, but some are still the splitting ones. I have two of them ,one is the earlier...
Dear All, I have recently purchased a used st 901 camera in e-bay. The camera work correctly in manual mode, but doesn't work in automatic mode. (1. The...
I was about to change it today to my AZ-1 as it sometimes leaves shutter on for longer times than should. I opened the base, and found no electrolytic cap,...
That printed circuit board is very different to the one in the AX's. Are you sure its a tantalum?, hard to tell from your shot but it looks like a small...
It is tantalum, and soldered afterwards, that is for sure. The problem is that the microfaraday- value is no longer readable, so I can't be sure it's the...
Most cameras with a split image screen also have a small area of microprism. You just have to look at the right part of the screen. The split-image focussing...
These cameras are notoriously unreliable. They were never fully developed before Fujica stopped producing screw-mount cameras. Are you sure your batteries are...
Hi... My name is Randy, I'm kind of a Camera Collector. I have every Minolta SRT made ,an XG1n, some Pentax, Yashica, Mamiya, and so on. I happened to pick up...
Dear All. I use good 6v battery. The shutter opens and then does not close in automatic mode with battery. but, opens and close without battery. So I think...
Hi, I have STX-1n. Can I put porst lens to my camera ? how about quality of the lens if compare with fujica lens ? Once again, at ebay there was a lens...
... found ... once ... Hi, Juhani. I have two AZ-1 cameras. Opened both to check the capacitors. It does look like a tantalium, a black thingy, rectangular...
It's to allow you to mount your standard lens in reverse for ultra- macro work ... try holding your standard lens "backwards" on the front of your camera and...
A salutary reminder to those of us who regularly sell on Ebay - always give a good accurate description of the item. I sold a reversing ring last year and made...
Subject: Fujica ST-705w Wind Lever and ST-605 Battery Cover I have a nice ST-705w chrome body that lost its advance winding lever. I'd like to locate another...
... ##Sounds bad, as L6 nor L5 means zero to me. And yours has also had them changed... Hope that there is one AZ-1 in group where the value is still visible,...
... By not tighting it up when it becomes loose. I loaned my STX-1 to my brother's family for a trip one time and it came back missing a screw in the body...
Hi John: You lent the camera to them for a trip. There is your answer for "what they did". Optics screws, while riding around in a vehicle, love to back out of...
I saw some discussion and I want to buy a camera with a center micro-prism, but I didn't see a final answer so I'll ask: ??? Which camers'a have the...
Subject: Lost Advance Lever Randy, the lever mechanism on the ST-705w either backed up on it's threads and fell off or, the prior owner took it off for some...
So, does anyone else have AZ-1 here who could look under base plate for that capacitor? There is a picture of it in "Photos" / "juhamak" and I should need to...
That capacitor ("shutter delay capacitor") is used to adjust the exposure at EV 15. It was available in 3 values to adjust the EV error - 0.01 mf , 0.022mf and...
Ciao Juhani, happy new year. I read your post now. I opened my Az-1 base plate for you, here's what I can see about the capacitor: having the camera with the...
Hello to all the group. In the Photos section (in cookyae folder) I have upload a scan of the Fujinon M42 wideangle 28mm with the silver aperture ring I was ...
... other ... Sorry about the previous message. I don't know why it dropped my added text. The silver aperture rings are from the days of the original ST-701s....
Thank you both, I will take the old one away and try to meter it if it still gives readings, and go to our local "Radio shack" with the colour codes as extra...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
