... hi Gary, your instructions were very clear and I succeeded in removing the top. The ST605n is much nicer to open up than the over-engineered Praktica MTL3....
I will scan the instructions possibly tonight. Can you send me your email. Send it to gp57@.... This way I can send the scans directly to you. I still...
Fujinon 3,5-4,5/43-75mm for X-bayonet, lens in Germany but ships internationally, I have bought one item from her and everything went fluently (paid sending...
Thanks for the help I didn't realize that I need to press the shutter release button at the same time I held down the meter button on the camera...it works ...
... a STX-1 with 43-75mm Fuji-zoom :) It was in local "ebay" and I did get it for a ridiculous 39 euros (approx 42 USD) incl postage so better to be with a...
I have a STX-2, I read the file about the adapters but the X-D adaptor described fits the AX and STX-1 only, it seems to me there is no adaptor for my camera....
I picked up a zeiss jena 2.4/35mm flektogon electric the other day and I notice now there is a compatability issue with my ST705 so I thought I'd pass on. The...
... I noticed the same issue with the Zeiss Jena 3.5/135mm Sonnar (non-electric) on my ST605n. Same thing: the diaphragm stops down a tiny bit (to around f/4...
I do use Tamron on my AZ-1, and I had same problem with a too long stop-down pin. It was very easy to gently file down the pin a bit shorter, once and a while...
Hi Marco, The Adaptall II should be ok for the stx2 (check at http://www.toptown.com/nowhere/kypfer/fujica.htm) 'cause they mount the same Fujinon X Bayonet. I...
I have just recieved an AX-5 with a 50mm f:1.6 lens. the camera is in excelent working condition except one thing that troubles me. all the black foam around...
Very common problem and easily cured! Search ebay for a seller "interslice" and get the seal kit ($9,90-kit is good). Kit has good instructions included. My...
-Yes, I had the same problem with my non electric lens. The solution? Took it apart and filed down the pin a tiny bit. Now it works like a chartm. One of...
-Yes, I had the same problem with my non electric lens. The solution? Took it apart and filed down the pin a tiny bit. Now it works like a chartm. One of...
I have a Fujica ST 605 and a Fujica AZ-1 that I have flashes for. The question is that I have a Focal Multi-Dedicated flash model number DA2000 and I don't...
I have an Auto Sears Tele-Zoom 90-230mm and a Sears/Takumar 60-300mm lens that I bought off of e-bay. I can use them successfully, but it would be nice to know...
I have a Fujica ST-605 and an AZ-1. Both have filthy view finder screens. I would like to know if anyone has advice on how to cleen these and how to get to...
Kimmarie, you said that you didn't know that you have to hold down the aperature button and the shudder release at the same time. You only have to do this when...
Thanks Tommy I did find this site before and got the ST801 manual down loaded...but thanks so much for thinking of me. It really is nice having so much...
My wife's AX-5 has a multidedicated "wild-one", it has "F" for Fujica and none of the others (O/N/M/P) works. BUT, AZ-1 is more delicate, and her flash doesn't...
Taking the top off was discussed some weeks ago here, go to archive and you will find it. If I remember correctly it was Gary who gave good instructions? JH ...
Hi Hongjun This is the site that Tommy sent me and at the bottom of it you will find a link to the ST801 manual that can be downloaded from the internet. Hope...
I just inherited a Fujica ST-901 without instructions and do not know how to operate the camera. I replaced the battery and it seems to work on automatic...
... Tommy, Follow the Yellow Brick Road! PLACE CAMERA WITH LENS FACING AWAY AND YOU LOOKING AT THE BACK. 1. You have 2 screws, one on the right side of camera...
So, I may add one more question... My STX-1 seems to need meter calibration, there's 3 potentiometers next to prism but which of them to turn, do you have any...
Thanks Gary this will be very helpful. It is also fiting that you wrote yellow brick road because I live in Kansas..(pause for laughter)...Tommy out... ... ...
Thank you very much, but I don't understand what DOP measurement means, can you explane it to me? I'm italian too. Ciao Marco ... the same ... also like ... ...
Hi folks, can't believe I've stumbled on some Fujica enthusiasts!. Here's my story: I have a 'new' STX-1 still in original box from the shop with all the bits...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
