Mike,

Can you send me a sample $PRAVE message or $PRAVE specification so we can be
sure we are creating the correct syntax?

Also, will this work with version 12?

THanks,

Garret

--- In global_mapper@yahoogroups.com, "ibidem_76" <garret.duffy@...> wrote:
>
> Thanks Mike, that's a great help.  We will look into it.
>
> Garret
>
> --- In global_mapper@yahoogroups.com, "Global Mapper Support" <global_mapper@>
wrote:
> >
> > Garret,
> >
> >
> >
> > Currently Global Mapper can only track one NMEA stream, but there is a way
> > to combine multiple vessels into a single NMEA stream using $PRAVE sentences
> > and then Global Mapper can track multiple at a time. Is there any support
> > for combining the NMEA streams and massaging them a bit on your systems?
> >
> >
> >
> > Thanks,
> >
> >
> >
> > Mike
> >
> > Global Mapper Guru
> >
> > gmsupport@
> >
> > http://www.globalmapper.com
> >
> >
> >
> > From: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
> > On Behalf Of ibidem_76
> > Sent: Friday, November 11, 2011 2:57 AM
> > To: global_mapper@yahoogroups.com
> > Subject: [global_mapper] Feature Request: track more than one GPS vessel
> > simultaneously
> >
> >
> >
> >
> >
> > Hi,
> >
> > If you want Global Mapper to be used more in the marine community, it would
> > be great if you could enable functionality to track more than one GPS
> > vessel, e.g. mothership and ROV (that is the situation we are working in).
> > Each vessel has separate NMEA string going in to a different COM port, could
> > that be a way for GM to distinguish between the two?
> >
> > Thanks,
> >
> > Garret
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>

Mike,

Is the Raveon specification OK?  Will it work with v. 12?

Garret
--- In global_mapper@yahoogroups.com, "ibidem_76" <garret.duffy@...> wrote:
>
> Mike,
>
> Can you send me a sample $PRAVE message or $PRAVE specification so we can be
sure we are creating the correct syntax?
>
> Also, will this work with version 12?
>
> THanks,
>
> Garret
>
> --- In global_mapper@yahoogroups.com, "ibidem_76" <garret.duffy@> wrote:
> >
> > Thanks Mike, that's a great help.  We will look into it.
> >
> > Garret
> >
> > --- In global_mapper@yahoogroups.com, "Global Mapper Support"
<global_mapper@> wrote:
> > >
> > > Garret,
> > >
> > >
> > >
> > > Currently Global Mapper can only track one NMEA stream, but there is a way
> > > to combine multiple vessels into a single NMEA stream using $PRAVE
sentences
> > > and then Global Mapper can track multiple at a time. Is there any support
> > > for combining the NMEA streams and massaging them a bit on your systems?
> > >
> > >
> > >
> > > Thanks,
> > >
> > >
> > >
> > > Mike
> > >
> > > Global Mapper Guru
> > >
> > > gmsupport@
> > >
> > > http://www.globalmapper.com
> > >
> > >
> > >
> > > From: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
> > > On Behalf Of ibidem_76
> > > Sent: Friday, November 11, 2011 2:57 AM
> > > To: global_mapper@yahoogroups.com
> > > Subject: [global_mapper] Feature Request: track more than one GPS vessel
> > > simultaneously
> > >
> > >
> > >
> > >
> > >
> > > Hi,
> > >
> > > If you want Global Mapper to be used more in the marine community, it
would
> > > be great if you could enable functionality to track more than one GPS
> > > vessel, e.g. mothership and ROV (that is the situation we are working in).
> > > Each vessel has separate NMEA string going in to a different COM port,
could
> > > that be a way for GM to distinguish between the two?
> > >
> > > Thanks,
> > >
> > > Garret
> > >
> > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
>

Is the "From ID" used in GM to distinguish between vessels?  Is the "To ID" used
at all?

Thanks!
G

--- In global_mapper@yahoogroups.com, "ibidem_76" <garret.duffy@...> wrote:
>
>
> Mike,
>
> Is the Raveon specification OK?  Will it work with v. 12?
>
> Garret
> --- In global_mapper@yahoogroups.com, "ibidem_76" <garret.duffy@> wrote:
> >
> > Mike,
> >
> > Can you send me a sample $PRAVE message or $PRAVE specification so we can be
sure we are creating the correct syntax?
> >
> > Also, will this work with version 12?
> >
> > THanks,
> >
> > Garret
> >
> > --- In global_mapper@yahoogroups.com, "ibidem_76" <garret.duffy@> wrote:
> > >
> > > Thanks Mike, that's a great help.  We will look into it.
> > >
> > > Garret
> > >
> > > --- In global_mapper@yahoogroups.com, "Global Mapper Support"
<global_mapper@> wrote:
> > > >
> > > > Garret,
> > > >
> > > >
> > > >
> > > > Currently Global Mapper can only track one NMEA stream, but there is a
way
> > > > to combine multiple vessels into a single NMEA stream using $PRAVE
sentences
> > > > and then Global Mapper can track multiple at a time. Is there any
support
> > > > for combining the NMEA streams and massaging them a bit on your systems?
> > > >
> > > >
> > > >
> > > > Thanks,
> > > >
> > > >
> > > >
> > > > Mike
> > > >
> > > > Global Mapper Guru
> > > >
> > > > gmsupport@
> > > >
> > > > http://www.globalmapper.com
> > > >
> > > >
> > > >
> > > > From: global_mapper@yahoogroups.com
[mailto:global_mapper@yahoogroups.com]
> > > > On Behalf Of ibidem_76
> > > > Sent: Friday, November 11, 2011 2:57 AM
> > > > To: global_mapper@yahoogroups.com
> > > > Subject: [global_mapper] Feature Request: track more than one GPS vessel
> > > > simultaneously
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Hi,
> > > >
> > > > If you want Global Mapper to be used more in the marine community, it
would
> > > > be great if you could enable functionality to track more than one GPS
> > > > vessel, e.g. mothership and ROV (that is the situation we are working
in).
> > > > Each vessel has separate NMEA string going in to a different COM port,
could
> > > > that be a way for GM to distinguish between the two?
> > > >
> > > > Thanks,
> > > >
> > > > Garret
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > >
> >
>

G,



Yes, the "From ID" is used to distinguish the vessels. The "To ID" is not
used.



The Raveon spec for $PRAVE should work fine and yes it will work in v12.



Once you have multiple devices tracking you can manage them with the
GPS->Manage GPS Devices menu command.



Let me know if I can be of further assistance.



Thanks,



Mike

Global Mapper Guru

gmsupport@...

http://www.globalmapper.com



From: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
On Behalf Of ibidem_76
Sent: Monday, November 14, 2011 2:10 AM
To: global_mapper@yahoogroups.com
Subject: [global_mapper] Re: Feature Request: track more than one GPS vessel
simultaneously





Is the "From ID" used in GM to distinguish between vessels? Is the "To ID"
used at all?

Thanks!
G

--- In global_mapper@yahoogroups.com
<mailto:global_mapper%40yahoogroups.com> , "ibidem_76" <garret.duffy@...>
wrote:
>
>
> Mike,
>
> Is the Raveon specification OK? Will it work with v. 12?
>
> Garret
> --- In global_mapper@yahoogroups.com
<mailto:global_mapper%40yahoogroups.com> , "ibidem_76" <garret.duffy@>
wrote:
> >
> > Mike,
> >
> > Can you send me a sample $PRAVE message or $PRAVE specification so we
can be sure we are creating the correct syntax?
> >
> > Also, will this work with version 12?
> >
> > THanks,
> >
> > Garret
> >
> > --- In global_mapper@yahoogroups.com
<mailto:global_mapper%40yahoogroups.com> , "ibidem_76" <garret.duffy@>
wrote:
> > >
> > > Thanks Mike, that's a great help. We will look into it.
> > >
> > > Garret
> > >
> > > --- In global_mapper@yahoogroups.com
<mailto:global_mapper%40yahoogroups.com> , "Global Mapper Support"
<global_mapper@> wrote:
> > > >
> > > > Garret,
> > > >
> > > >
> > > >
> > > > Currently Global Mapper can only track one NMEA stream, but there is
a way
> > > > to combine multiple vessels into a single NMEA stream using $PRAVE
sentences
> > > > and then Global Mapper can track multiple at a time. Is there any
support
> > > > for combining the NMEA streams and massaging them a bit on your
systems?
> > > >
> > > >
> > > >
> > > > Thanks,
> > > >
> > > >
> > > >
> > > > Mike
> > > >
> > > > Global Mapper Guru
> > > >
> > > > gmsupport@
> > > >
> > > > http://www.globalmapper.com
> > > >
> > > >
> > > >
> > > > From: global_mapper@yahoogroups.com
<mailto:global_mapper%40yahoogroups.com>
[mailto:global_mapper@yahoogroups.com
<mailto:global_mapper%40yahoogroups.com> ]
> > > > On Behalf Of ibidem_76
> > > > Sent: Friday, November 11, 2011 2:57 AM
> > > > To: global_mapper@yahoogroups.com
<mailto:global_mapper%40yahoogroups.com>
> > > > Subject: [global_mapper] Feature Request: track more than one GPS
vessel
> > > > simultaneously
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Hi,
> > > >
> > > > If you want Global Mapper to be used more in the marine community,
it would
> > > > be great if you could enable functionality to track more than one
GPS
> > > > vessel, e.g. mothership and ROV (that is the situation we are
working in).
> > > > Each vessel has separate NMEA string going in to a different COM
port, could
> > > > that be a way for GM to distinguish between the two?
> > > >
> > > > Thanks,
> > > >
> > > > Garret
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > >
> >
>





[Non-text portions of this message have been removed]

I'm a new user of GM (version 10 for now) and hate to post this issue because
I'm sure I'm doing something stupid but - when trying to display a map all the
projections look like Mercator (or points plotted as lat/lon).

For example I'm using the well known world countries file "world_adm0.shp". The
projection I'd like to use is Winkel-Tripel.
I select the projection in the configure panel but the resulting map looks like
Mercator, not Winkel-Tripel. So what else do I have to do to control the
projection?

Dan,



Which v10 version are you using? When I use Global Mapper v10.02 and display
a world map in Winkel Tripel it doesn't look at all like Mercator.



Thanks,



Mike

Global Mapper Guru

gmsupport@...

http://www.globalmapper.com



From: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
On Behalf Of Dan Hutt
Sent: Monday, November 14, 2011 10:00 AM
To: global_mapper@yahoogroups.com
Subject: [global_mapper] Projections not working in GlobalMapper 10?





I'm a new user of GM (version 10 for now) and hate to post this issue
because I'm sure I'm doing something stupid but - when trying to display a
map all the projections look like Mercator (or points plotted as lat/lon).

For example I'm using the well known world countries file "world_adm0.shp".
The projection I'd like to use is Winkel-Tripel.
I select the projection in the configure panel but the resulting map looks
like Mercator, not Winkel-Tripel. So what else do I have to do to control
the projection?





[Non-text portions of this message have been removed]

Thanks for the response, Mike. I am also using the exact same version as you -
v10.02.

Do you have a .prj file that you use in conjunction with the .shp file?

- Dan

--- In global_mapper@yahoogroups.com, "Global Mapper Support"
<global_mapper@...> wrote:
>
> Dan,
>
>
>
> Which v10 version are you using? When I use Global Mapper v10.02 and display
> a world map in Winkel Tripel it doesn't look at all like Mercator.
>
>
>
> Thanks,
>
>
>
> Mike
>
> Global Mapper Guru
>
> gmsupport@...
>
> http://www.globalmapper.com
>
>
>
> From: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
> On Behalf Of Dan Hutt
> Sent: Monday, November 14, 2011 10:00 AM
> To: global_mapper@yahoogroups.com
> Subject: [global_mapper] Projections not working in GlobalMapper 10?
>
>
>
>
>
> I'm a new user of GM (version 10 for now) and hate to post this issue
> because I'm sure I'm doing something stupid but - when trying to display a
> map all the projections look like Mercator (or points plotted as lat/lon).
>
> For example I'm using the well known world countries file "world_adm0.shp".
> The projection I'd like to use is Winkel-Tripel.
> I select the projection in the configure panel but the resulting map looks
> like Mercator, not Winkel-Tripel. So what else do I have to do to control
> the projection?
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

Dan,



I don't have a PRJ file, I just set the projection to Winkel Tripel on the
Projection tab of the Configuration dialog. Can you send a screenshot of
what that looks like to gmsupport@....



Thanks,



Mike

Global Mapper Guru

gmsupport@...

http://www.globalmapper.com



From: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
On Behalf Of Dan Hutt
Sent: Tuesday, November 15, 2011 9:56 AM
To: global_mapper@yahoogroups.com
Subject: [global_mapper] Re: Projections not working in GlobalMapper 10?





Thanks for the response, Mike. I am also using the exact same version as you
- v10.02.

Do you have a .prj file that you use in conjunction with the .shp file?

- Dan

--- In global_mapper@yahoogroups.com
<mailto:global_mapper%40yahoogroups.com> , "Global Mapper Support"
<global_mapper@...> wrote:
>
> Dan,
>
>
>
> Which v10 version are you using? When I use Global Mapper v10.02 and
display
> a world map in Winkel Tripel it doesn't look at all like Mercator.
>
>
>
> Thanks,
>
>
>
> Mike
>
> Global Mapper Guru
>
> gmsupport@...
>
> http://www.globalmapper.com
>
>
>
> From: global_mapper@yahoogroups.com
<mailto:global_mapper%40yahoogroups.com>
[mailto:global_mapper@yahoogroups.com
<mailto:global_mapper%40yahoogroups.com> ]
> On Behalf Of Dan Hutt
> Sent: Monday, November 14, 2011 10:00 AM
> To: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com>

> Subject: [global_mapper] Projections not working in GlobalMapper 10?
>
>
>
>
>
> I'm a new user of GM (version 10 for now) and hate to post this issue
> because I'm sure I'm doing something stupid but - when trying to display a
> map all the projections look like Mercator (or points plotted as lat/lon).
>
> For example I'm using the well known world countries file
"world_adm0.shp".
> The projection I'd like to use is Winkel-Tripel.
> I select the projection in the configure panel but the resulting map looks
> like Mercator, not Winkel-Tripel. So what else do I have to do to control
> the projection?
>
>
>
>
>
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]

Thanks Mike. I made a screen shot of both the Mercator and Winkel-Tripel
projections to compare. I'll send them to the email address below.

- Dan

--- In global_mapper@yahoogroups.com, "Global Mapper Support"
<global_mapper@...> wrote:
>
> Dan,
>
>
>
> I don't have a PRJ file, I just set the projection to Winkel Tripel on the
> Projection tab of the Configuration dialog. Can you send a screenshot of
> what that looks like to gmsupport@...
>
>
>
> Thanks,
>
>
>
> Mike
>
> Global Mapper Guru
>
> gmsupport@...
>
> http://www.globalmapper.com
>
>
>
> From: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
> On Behalf Of Dan Hutt
> Sent: Tuesday, November 15, 2011 9:56 AM
> To: global_mapper@yahoogroups.com
> Subject: [global_mapper] Re: Projections not working in GlobalMapper 10?
>
>
>
>
>
> Thanks for the response, Mike. I am also using the exact same version as you
> - v10.02.
>
> Do you have a .prj file that you use in conjunction with the .shp file?
>
> - Dan
>
> --- In global_mapper@yahoogroups.com
> <mailto:global_mapper%40yahoogroups.com> , "Global Mapper Support"
> <global_mapper@> wrote:
> >
> > Dan,
> >
> >
> >
> > Which v10 version are you using? When I use Global Mapper v10.02 and
> display
> > a world map in Winkel Tripel it doesn't look at all like Mercator.
> >
> >
> >
> > Thanks,
> >
> >
> >
> > Mike
> >
> > Global Mapper Guru
> >
> > gmsupport@
> >
> > http://www.globalmapper.com
> >
> >
> >
> > From: global_mapper@yahoogroups.com
> <mailto:global_mapper%40yahoogroups.com>
> [mailto:global_mapper@yahoogroups.com
> <mailto:global_mapper%40yahoogroups.com> ]
> > On Behalf Of Dan Hutt
> > Sent: Monday, November 14, 2011 10:00 AM
> > To: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com>
>
> > Subject: [global_mapper] Projections not working in GlobalMapper 10?
> >
> >
> >
> >
> >
> > I'm a new user of GM (version 10 for now) and hate to post this issue
> > because I'm sure I'm doing something stupid but - when trying to display a
> > map all the projections look like Mercator (or points plotted as lat/lon).
> >
> > For example I'm using the well known world countries file
> "world_adm0.shp".
> > The projection I'd like to use is Winkel-Tripel.
> > I select the projection in the configure panel but the resulting map looks
> > like Mercator, not Winkel-Tripel. So what else do I have to do to control
> > the projection?
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

 
Hi,

I have got some files with .bin  format. These files contain clutter and height
information for 1 area.I can open them with Global Mapper v13.00. but I need to
get the numerical values that the files contain. How can I find that??


[Non-text portions of this message have been removed]

If you check on the status bar as you move your cursor over the data you
should see the numeric data from the current pixel location.



Let me know if I can be of further assistance.



Thanks,



Mike

Global Mapper Guru

gmsupport@...

http://www.globalmapper.com



From: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
On Behalf Of Ahmed Mahbubul Alam
Sent: Thursday, November 17, 2011 6:55 AM
To: global_mapper@yahoogroups.com
Subject: [global_mapper] (unknown)






Hi,

I have got some files with .bin  format. These files contain clutter and
height information for 1 area.I can open them with Global Mapper v13.00. but
I need to get the numerical values that the files contain. How can I find
that??

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]

Hi,
Thanks for the reply. I saw that the value are shown in the status bar. But I
want to get them as a file as I have to work with these data in Matlab.

BR,
Mahbub



________________________________
  From: Global Mapper Support <global_mapper@...>
To: global_mapper@yahoogroups.com
Sent: Thursday, November 17, 2011 5:30 PM
Subject: RE: [global_mapper] (unknown)


 
If you check on the status bar as you move your cursor over the data you
should see the numeric data from the current pixel location.

Let me know if I can be of further assistance.

Thanks,

Mike

Global Mapper Guru

gmsupport@...

http://www.globalmapper.com

From: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
On Behalf Of Ahmed Mahbubul Alam
Sent: Thursday, November 17, 2011 6:55 AM
To: global_mapper@yahoogroups.com
Subject: [global_mapper] (unknown)

Hi,

I have got some files with .bin  format. These files contain clutter and
height information for 1 area.I can open them with Global Mapper v13.00. but
I need to get the numerical values that the files contain. How can I find
that??

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]

Mahbub,



You can use the File->Export Elevation Data menu command to export  the data to
another supported elevation format. I’m not too sure what Matlab supports for
grids though. You may have to export to a DXF Point elevation file, then load
that back into Global Mapper and use File->Export Vector Data to export that to
a Matlab point file that you should definitely be able to load in Matlab.



Let me know if I can be of further assistance.



Thanks,



Mike

Global Mapper Guru

gmsupport@...

http://www.globalmapper.com



From: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com] On
Behalf Of Ahmed Mahbubul Alam
Sent: Friday, November 18, 2011 5:38 AM
To: global_mapper@yahoogroups.com
Subject: Re: [global_mapper] (unknown)





Hi,
Thanks for the reply. I saw that the value are shown in the status bar. But I
want to get them as a file as I have to work with these data in Matlab.

BR,
Mahbub

________________________________
From: Global Mapper Support <global_mapper@...
<mailto:global_mapper%40yahoo.com> >
To: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com>
Sent: Thursday, November 17, 2011 5:30 PM
Subject: RE: [global_mapper] (unknown)



If you check on the status bar as you move your cursor over the data you
should see the numeric data from the current pixel location.

Let me know if I can be of further assistance.

Thanks,

Mike

Global Mapper Guru

gmsupport@... <mailto:gmsupport%40bluemarblegeo.com>

http://www.globalmapper.com

From: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com> 
[mailto:global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com> ]
On Behalf Of Ahmed Mahbubul Alam
Sent: Thursday, November 17, 2011 6:55 AM
To: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com>
Subject: [global_mapper] (unknown)

Hi,

I have got some files with .bin format. These files contain clutter and
height information for 1 area.I can open them with Global Mapper v13.00. but
I need to get the numerical values that the files contain. How can I find
that??

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]

Is there any way to automatically add elevation attributes to Tiger Road Data? 
Trying to use NED data and tiger data to get a 3d view of the roads, can't seem
to figure out how to do this.  Any help would be appreciated.

Chuck,



Yes, simply select all of the roads with the Digitizer Tool, then
right-click and select to add elevation values to them. This should add
per-vertex elevations from the NED data to the roads.



Let me know if I can be of further assistance.



Thanks,



Mike

Global Mapper Guru

gmsupport@...

http://www.globalmapper.com



From: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
On Behalf Of chuck cotherman
Sent: Friday, November 18, 2011 1:06 PM
To: global_mapper@yahoogroups.com
Subject: [global_mapper] Add elevation to Tiger Road Data





Is there any way to automatically add elevation attributes to Tiger Road
Data? Trying to use NED data and tiger data to get a 3d view of the roads,
can't seem to figure out how to do this. Any help would be appreciated.





[Non-text portions of this message have been removed]

Mike,
here is a link to a screen shot, http://goo.gl/IQtPQ

I can figure out what to select once I right click

Version 11 if that matters

Thanks

--- In global_mapper@yahoogroups.com, "Global Mapper Support"
<global_mapper@...> wrote:
>
> Chuck,
>
>
>
> Yes, simply select all of the roads with the Digitizer Tool, then
> right-click and select to add elevation values to them. This should add
> per-vertex elevations from the NED data to the roads.
>
>
>
> Let me know if I can be of further assistance.
>
>
>
> Thanks,
>
>
>
> Mike
>
> Global Mapper Guru
>
> gmsupport@...
>
> http://www.globalmapper.com
>
>
>
> From: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
> On Behalf Of chuck cotherman
> Sent: Friday, November 18, 2011 1:06 PM
> To: global_mapper@yahoogroups.com
> Subject: [global_mapper] Add elevation to Tiger Road Data
>
>
>
>
>
> Is there any way to automatically add elevation attributes to Tiger Road
> Data? Trying to use NED data and tiger data to get a 3d view of the roads,
> can't seem to figure out how to do this. Any help would be appreciated.
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

Chuck,



Aha, that option wasn't added until the v12 release series. You could either
upgrade (hint, hint) or use File->Export Vector Data menu command and export
to a format like Shapefile or DXF and check to create 3D features to get
elevations added from the terrain and then re-import.



Let me know if I can be of further assistance.



Thanks,



Mike

Global Mapper Guru

gmsupport@...

http://www.globalmapper.com



From: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
On Behalf Of chuck cotherman
Sent: Friday, November 18, 2011 3:55 PM
To: global_mapper@yahoogroups.com
Subject: [global_mapper] Re: Add elevation to Tiger Road Data





Mike,
here is a link to a screen shot, http://goo.gl/IQtPQ

I can figure out what to select once I right click

Version 11 if that matters

Thanks

--- In global_mapper@yahoogroups.com
<mailto:global_mapper%40yahoogroups.com> , "Global Mapper Support"
<global_mapper@...> wrote:
>
> Chuck,
>
>
>
> Yes, simply select all of the roads with the Digitizer Tool, then
> right-click and select to add elevation values to them. This should add
> per-vertex elevations from the NED data to the roads.
>
>
>
> Let me know if I can be of further assistance.
>
>
>
> Thanks,
>
>
>
> Mike
>
> Global Mapper Guru
>
> gmsupport@...
>
> http://www.globalmapper.com
>
>
>
> From: global_mapper@yahoogroups.com
<mailto:global_mapper%40yahoogroups.com>
[mailto:global_mapper@yahoogroups.com
<mailto:global_mapper%40yahoogroups.com> ]
> On Behalf Of chuck cotherman
> Sent: Friday, November 18, 2011 1:06 PM
> To: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com>

> Subject: [global_mapper] Add elevation to Tiger Road Data
>
>
>
>
>
> Is there any way to automatically add elevation attributes to Tiger Road
> Data? Trying to use NED data and tiger data to get a 3d view of the roads,
> can't seem to figure out how to do this. Any help would be appreciated.
>
>
>
>
>
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]

Hi,

Thanks..I have found the data file.I got the file named
"clutterdata_example.mat" by setting the Global Mapper so that it does not shade
or interpolate the input pixel values when displaying the map, taking a screen
capture of the displayed map, pasting it into an image processing program,
saving this as a .bmp file and loading this to matlab. But the values are in
unit8 format. Now I need to match these values with the original values in the
map. You can see the original values in the attached print screen of the map.
How can I do that?

1) In the clutterdata_example.mat, there are 7 different numbers. But there are
9 different numbers in the color bar of the map. So I think 2 different numbers
are not present in the original data. Moving the cursor to check the values
originally available can be one process. Is there any other way to find those 7
different numbers. If that is available, then I think I can match them to the
unit8 data.

2) then I will have another problem of mapping those value with the pixels.

BR,
Mahbub



________________________________
  From: Global Mapper Support <global_mapper@...>
To: global_mapper@yahoogroups.com
Sent: Friday, November 18, 2011 2:42 PM
Subject: RE: [global_mapper] (unknown)


 
Mahbub,

You can use the File->Export Elevation Data menu command to export  the data to
another supported elevation format. I’m not too sure what Matlab supports for
grids though. You may have to export to a DXF Point elevation file, then load
that back into Global Mapper and use File->Export Vector Data to export that to
a Matlab point file that you should definitely be able to load in Matlab.

Let me know if I can be of further assistance.

Thanks,

Mike

Global Mapper Guru

gmsupport@...

http://www.globalmapper.com

From: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com] On
Behalf Of Ahmed Mahbubul Alam
Sent: Friday, November 18, 2011 5:38 AM
To: global_mapper@yahoogroups.com
Subject: Re: [global_mapper] (unknown)

Hi,
Thanks for the reply. I saw that the value are shown in the status bar. But I
want to get them as a file as I have to work with these data in Matlab.

BR,
Mahbub

________________________________
From: Global Mapper Support <global_mapper@...
<mailto:global_mapper%40yahoo.com> >
To: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com>
Sent: Thursday, November 17, 2011 5:30 PM
Subject: RE: [global_mapper] (unknown)

If you check on the status bar as you move your cursor over the data you
should see the numeric data from the current pixel location.

Let me know if I can be of further assistance.

Thanks,

Mike

Global Mapper Guru

gmsupport@... <mailto:gmsupport%40bluemarblegeo.com>

http://www.globalmapper.com

From: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com> 
[mailto:global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com> ]
On Behalf Of Ahmed Mahbubul Alam
Sent: Thursday, November 17, 2011 6:55 AM
To: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com>
Subject: [global_mapper] (unknown)

Hi,

I have got some files with .bin format. These files contain clutter and
height information for 1 area.I can open them with Global Mapper v13.00. but
I need to get the numerical values that the files contain. How can I find
that??

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]

Sorry,

I forgot to attach the files in earlier message. Here are the files.

BR,
Mahbub


----- Forwarded Message -----
From: Ahmed Mahbubul Alam <amahbubul85@...>
To: "global_mapper@yahoogroups.com" <global_mapper@yahoogroups.com>
Sent: Monday, November 21, 2011 6:55 PM
Subject: Re: [global_mapper] (unknown)


 
Hi,

Thanks..I have found the data file.I got the file named
"clutterdata_example.mat" by setting the Global Mapper so that it does not shade
or interpolate the input pixel values when displaying the map, taking a screen
capture of the displayed map, pasting it into an image processing program,
saving this as a .bmp file and loading this to matlab. But the values are in
unit8 format. Now I need to match these values with the original values in the
map. You can see the original values in the attached print screen of the map.
How can I do that?

1) In the clutterdata_example.mat, there are 7 different numbers. But there are
9 different numbers in the color bar of the map. So I think 2 different numbers
are not present in the original data. Moving the cursor to check the values
originally available can be one process. Is there any other way to find those 7
different numbers. If that is available, then I think I can match them to the
unit8 data.

2) then I will have another problem of mapping those value with the pixels.

BR,
Mahbub

________________________________
From: Global Mapper Support <global_mapper@...>
To: global_mapper@yahoogroups.com
Sent: Friday, November 18, 2011 2:42 PM
Subject: RE: [global_mapper] (unknown)


 
Mahbub,

You can use the File->Export Elevation Data menu command to export  the data to
another supported elevation format. I’m not too sure what Matlab supports for
grids though. You may have to export to a DXF Point elevation file, then load
that back into Global Mapper and use File->Export Vector Data to export that to
a Matlab point file that you should definitely be able to load in Matlab.

Let me know if I can be of further assistance.

Thanks,

Mike

Global Mapper Guru

gmsupport@...

http://www.globalmapper.com

From: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com] On
Behalf Of Ahmed Mahbubul Alam
Sent: Friday, November 18, 2011 5:38 AM
To: global_mapper@yahoogroups.com
Subject: Re: [global_mapper] (unknown)

Hi,
Thanks for the reply. I saw that the value are shown in the status bar. But I
want to get them as a file as I have to work with these data in Matlab.

BR,
Mahbub

________________________________
From: Global Mapper Support <global_mapper@...
<mailto:global_mapper%40yahoo.com> >
To: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com>
Sent: Thursday, November 17, 2011 5:30 PM
Subject: RE: [global_mapper] (unknown)

If you check on the status bar as you move your cursor over the data you
should see the numeric data from the current pixel location.

Let me know if I can be of further assistance.

Thanks,

Mike

Global Mapper Guru

gmsupport@... <mailto:gmsupport%40bluemarblegeo.com>

http://www.globalmapper.com

From: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com> 
[mailto:global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com> ]
On Behalf Of Ahmed Mahbubul Alam
Sent: Thursday, November 17, 2011 6:55 AM
To: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com>
Subject: [global_mapper] (unknown)

Hi,

I have got some files with .bin format. These files contain clutter and
height information for 1 area.I can open them with Global Mapper v13.00. but
I need to get the numerical values that the files contain. How can I find
that??

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]

Mahbub,



The Yahoo Groups do not allow attachments to email. Can you send the files to
gmsupport@... and I can take a look?



Thanks,



Mike

Global Mapper Guru

gmsupport@...

http://www.globalmapper.com



From: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com] On
Behalf Of Ahmed Mahbubul Alam
Sent: Monday, November 21, 2011 9:56 AM
To: global_mapper@yahoogroups.com
Subject: Re: [global_mapper] (unknown)





Hi,

Thanks..I have found the data file.I got the file named
"clutterdata_example.mat" by setting the Global Mapper so that it does not shade
or interpolate the input pixel values when displaying the map, taking a screen
capture of the displayed map, pasting it into an image processing program,
saving this as a .bmp file and loading this to matlab. But the values are in
unit8 format. Now I need to match these values with the original values in the
map. You can see the original values in the attached print screen of the map.
How can I do that?

1) In the clutterdata_example.mat, there are 7 different numbers. But there are
9 different numbers in the color bar of the map. So I think 2 different numbers
are not present in the original data. Moving the cursor to check the values
originally available can be one process. Is there any other way to find those 7
different numbers. If that is available, then I think I can match them to the
unit8 data.

2) then I will have another problem of mapping those value with the pixels.

BR,
Mahbub

________________________________
From: Global Mapper Support <global_mapper@...
<mailto:global_mapper%40yahoo.com> >
To: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com>
Sent: Friday, November 18, 2011 2:42 PM
Subject: RE: [global_mapper] (unknown)



Mahbub,

You can use the File->Export Elevation Data menu command to export the data to
another supported elevation format. I’m not too sure what Matlab supports for
grids though. You may have to export to a DXF Point elevation file, then load
that back into Global Mapper and use File->Export Vector Data to export that to
a Matlab point file that you should definitely be able to load in Matlab.

Let me know if I can be of further assistance.

Thanks,

Mike

Global Mapper Guru

gmsupport@... <mailto:gmsupport%40bluemarblegeo.com>

http://www.globalmapper.com

From: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com> 
[mailto:global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com> ]
On Behalf Of Ahmed Mahbubul Alam
Sent: Friday, November 18, 2011 5:38 AM
To: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com>
Subject: Re: [global_mapper] (unknown)

Hi,
Thanks for the reply. I saw that the value are shown in the status bar. But I
want to get them as a file as I have to work with these data in Matlab.

BR,
Mahbub

________________________________
From: Global Mapper Support <global_mapper@...
<mailto:global_mapper%40yahoo.com>  <mailto:global_mapper%40yahoo.com> >
To: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com> 
<mailto:global_mapper%40yahoogroups.com>
Sent: Thursday, November 17, 2011 5:30 PM
Subject: RE: [global_mapper] (unknown)

If you check on the status bar as you move your cursor over the data you
should see the numeric data from the current pixel location.

Let me know if I can be of further assistance.

Thanks,

Mike

Global Mapper Guru

gmsupport@... <mailto:gmsupport%40bluemarblegeo.com> 
<mailto:gmsupport%40bluemarblegeo.com>

http://www.globalmapper.com

From: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com> 
<mailto:global_mapper%40yahoogroups.com> [mailto:global_mapper@yahoogroups.com
<mailto:global_mapper%40yahoogroups.com> 
<mailto:global_mapper%40yahoogroups.com> ]
On Behalf Of Ahmed Mahbubul Alam
Sent: Thursday, November 17, 2011 6:55 AM
To: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com> 
<mailto:global_mapper%40yahoogroups.com>
Subject: [global_mapper] (unknown)

Hi,

I have got some files with .bin format. These files contain clutter and
height information for 1 area.I can open them with Global Mapper v13.00. but
I need to get the numerical values that the files contain. How can I find
that??

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]

Mahbub,



Could you perhaps load back in the uint8 file into Global Mapper as an image,
then open the Options dialog for the layer and on the Palette tab assign a color
for each value based on what it represents, then export that back out so it is
easier to visualize in Matlab?



Thanks,



Mike

Global Mapper Guru

gmsupport@...

http://www.globalmapper.com



From: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com] On
Behalf Of Ahmed Mahbubul Alam
Sent: Monday, November 21, 2011 9:56 AM
To: global_mapper@yahoogroups.com
Subject: Re: [global_mapper] (unknown)





Hi,

Thanks..I have found the data file.I got the file named
"clutterdata_example.mat" by setting the Global Mapper so that it does not shade
or interpolate the input pixel values when displaying the map, taking a screen
capture of the displayed map, pasting it into an image processing program,
saving this as a .bmp file and loading this to matlab. But the values are in
unit8 format. Now I need to match these values with the original values in the
map. You can see the original values in the attached print screen of the map.
How can I do that?

1) In the clutterdata_example.mat, there are 7 different numbers. But there are
9 different numbers in the color bar of the map. So I think 2 different numbers
are not present in the original data. Moving the cursor to check the values
originally available can be one process. Is there any other way to find those 7
different numbers. If that is available, then I think I can match them to the
unit8 data.

2) then I will have another problem of mapping those value with the pixels.

BR,
Mahbub

________________________________
From: Global Mapper Support <global_mapper@...
<mailto:global_mapper%40yahoo.com> >
To: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com>
Sent: Friday, November 18, 2011 2:42 PM
Subject: RE: [global_mapper] (unknown)



Mahbub,

You can use the File->Export Elevation Data menu command to export the data to
another supported elevation format. I’m not too sure what Matlab supports for
grids though. You may have to export to a DXF Point elevation file, then load
that back into Global Mapper and use File->Export Vector Data to export that to
a Matlab point file that you should definitely be able to load in Matlab.

Let me know if I can be of further assistance.

Thanks,

Mike

Global Mapper Guru

gmsupport@... <mailto:gmsupport%40bluemarblegeo.com>

http://www.globalmapper.com

From: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com> 
[mailto:global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com> ]
On Behalf Of Ahmed Mahbubul Alam
Sent: Friday, November 18, 2011 5:38 AM
To: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com>
Subject: Re: [global_mapper] (unknown)

Hi,
Thanks for the reply. I saw that the value are shown in the status bar. But I
want to get them as a file as I have to work with these data in Matlab.

BR,
Mahbub

________________________________
From: Global Mapper Support <global_mapper@...
<mailto:global_mapper%40yahoo.com>  <mailto:global_mapper%40yahoo.com> >
To: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com> 
<mailto:global_mapper%40yahoogroups.com>
Sent: Thursday, November 17, 2011 5:30 PM
Subject: RE: [global_mapper] (unknown)

If you check on the status bar as you move your cursor over the data you
should see the numeric data from the current pixel location.

Let me know if I can be of further assistance.

Thanks,

Mike

Global Mapper Guru

gmsupport@... <mailto:gmsupport%40bluemarblegeo.com> 
<mailto:gmsupport%40bluemarblegeo.com>

http://www.globalmapper.com

From: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com> 
<mailto:global_mapper%40yahoogroups.com> [mailto:global_mapper@yahoogroups.com
<mailto:global_mapper%40yahoogroups.com> 
<mailto:global_mapper%40yahoogroups.com> ]
On Behalf Of Ahmed Mahbubul Alam
Sent: Thursday, November 17, 2011 6:55 AM
To: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com> 
<mailto:global_mapper%40yahoogroups.com>
Subject: [global_mapper] (unknown)

Hi,

I have got some files with .bin format. These files contain clutter and
height information for 1 area.I can open them with Global Mapper v13.00. but
I need to get the numerical values that the files contain. How can I find
that??

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]

i want to try GM SDK.......anyone can help me with this?

How can i export data sets of a map from GM to Microsoft Excel.........i m a new
user in this field
regards,
Hussain

Please contact as at gmsupport@... and we can set you up with
a demo for the SDK.



Thanks,



Mike

Global Mapper Guru

gmsupport@...

http://www.globalmapper.com



From: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
On Behalf Of hussain2475
Sent: Tuesday, November 22, 2011 1:48 AM
To: global_mapper@yahoogroups.com
Subject: [global_mapper] Global Mapper SDk





i want to try GM SDK.......anyone can help me with this?





[Non-text portions of this message have been removed]

Hussain,



You can use File->Export Vector Data to export your data to a CSV file. You
can then load that into Excel.



Thanks,



Mike

Global Mapper Guru

gmsupport@...

http://www.globalmapper.com



From: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
On Behalf Of hussain2475
Sent: Tuesday, November 22, 2011 2:41 AM
To: global_mapper@yahoogroups.com
Subject: [global_mapper] map data sets export to MS Excel





How can i export data sets of a map from GM to Microsoft Excel.........i m a
new user in this field
regards,
Hussain





[Non-text portions of this message have been removed]

Hello Hussain,
While MS Excel format is not directly supported by Global Mapper, you could
export to CSV format which can be easily read in by Excel.  To do this, you
would go to File>Export Vector Format... to chose CSV from the Export menu. 
This will write out a comma delimited file that is natively supported by Excel. 
Let me know if I may be of any further assistance.

Regards,
Sam Knight
Blue Marble Geographics

--- In global_mapper@yahoogroups.com, "hussain2475" <hussain2475@...> wrote:
>
> How can i export data sets of a map from GM to Microsoft Excel.........i m a
new user in this field
> regards,
> Hussain
>

How can i export .TIF format files of maps to MS Excel to get data sets to
process them further for my work.

Regars,
Hussain

Hussain,



TIF files are images, not tabular data, so there isn't really any way to
export them so that you can load them into Excel. What are you wanting to do
with the data in Excel?



Thanks,



Mike

Global Mapper Guru

gmsupport@...

http://www.globalmapper.com



From: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
On Behalf Of hussain2475
Sent: Wednesday, November 23, 2011 1:55 AM
To: global_mapper@yahoogroups.com
Subject: [global_mapper] how to export .TIF format to MS Excel?





How can i export .TIF format files of maps to MS Excel to get data sets to
process them further for my work.

Regars,
Hussain





[Non-text portions of this message have been removed]

--- In global_mapper@yahoogroups.com, "Global Mapper Support"
<global_mapper@...> wrote:
>
> Hussain,
>
>
>
> TIF files are images, not tabular data, so there isn't really any way to
> export them so that you can load them into Excel. What are you wanting to do
> with the data in Excel?
>
>
>
> Thanks,
>
>
>
> Mike
>
> Global Mapper Guru
>
> gmsupport@...
>
> http://www.globalmapper.com
>
>
>
> From: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
> On Behalf Of hussain2475
> Sent: Wednesday, November 23, 2011 1:55 AM
> To: global_mapper@yahoogroups.com
> Subject: [global_mapper] how to export .TIF format to MS Excel?
>
>
>
>
>
> How can i export .TIF format files of maps to MS Excel to get data sets to
> process them further for my work.
>
> Regars,
> Hussain
>
>
>
>
>
I want to process this data in MATLAB and then i will again load it to GM for
visualization.
I am facing difficulty in doing so....i want to have these datasets.
Regards,
Hussain
>

Hussain,



Are your datasets in the TIFF format though? That is just an image and not
something you can really get into a tabular format. What type of data does
it contain?



Thanks,



Mike

Global Mapper Guru

gmsupport@...

http://www.globalmapper.com



From: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
On Behalf Of hussain2475
Sent: Wednesday, November 23, 2011 10:09 PM
To: global_mapper@yahoogroups.com
Subject: [global_mapper] Re: how to export .TIF format to MS Excel?







--- In global_mapper@yahoogroups.com
<mailto:global_mapper%40yahoogroups.com> , "Global Mapper Support"
<global_mapper@...> wrote:
>
> Hussain,
>
>
>
> TIF files are images, not tabular data, so there isn't really any way to
> export them so that you can load them into Excel. What are you wanting to
do
> with the data in Excel?
>
>
>
> Thanks,
>
>
>
> Mike
>
> Global Mapper Guru
>
> gmsupport@...
>
> http://www.globalmapper.com
>
>
>
> From: global_mapper@yahoogroups.com
<mailto:global_mapper%40yahoogroups.com>
[mailto:global_mapper@yahoogroups.com
<mailto:global_mapper%40yahoogroups.com> ]
> On Behalf Of hussain2475
> Sent: Wednesday, November 23, 2011 1:55 AM
> To: global_mapper@yahoogroups.com <mailto:global_mapper%40yahoogroups.com>

> Subject: [global_mapper] how to export .TIF format to MS Excel?
>
>
>
>
>
> How can i export .TIF format files of maps to MS Excel to get data sets to
> process them further for my work.
>
> Regars,
> Hussain
>
>
>
>
>
I want to process this data in MATLAB and then i will again load it to GM
for visualization.
I am facing difficulty in doing so....i want to have these datasets.
Regards,
Hussain
>





[Non-text portions of this message have been removed]