Hi,

I use the slope shader a lot as it is easier to create "visual texture" in
a background and see the imperfections when I am analysing sea bed
information..

Now when I do it, although I set it on a gray scale, i.e. white at 0 deg
slope and black at 1 deg slope (pending on the terrain the 1 can be 10 15
or etc..) the data background is always blue

Can I change it into an actual grey scale? if I go to custom color and
choose something else, I loose all the tecture again. It would be easier to
explain if I can forward an image. If it is OK to do so, let me know.

It is not that important but the question was raised at the office and I
have been trying to change it albeit with 0deg sucess.

Thanks and Regards,
Yiannis


[Non-text portions of this message have been removed]

Hello Yiannis,

Can you check your water display settings on the Vertical Options tab of the
Configuration dialog and make sure that is off?

If you want to send an image use gmsupport@..., or actually I
would suggest using the globalmapperforum.com web site for support as you can
attach images there and it is better organized for support than the Yahoo group
which is quite old.

Thanks,

Mike Childs
Global Mapper Guru
Blue Marble Geographics

Parker, CO USA
www.globalmapper.com
Email: gmsupport@...



Welcoming Global Mapper to our Product Line
www.bluemarblegeo.com
Contact Blue Marble at info@..., or call 800-616-2725/+1
(207)582-6747 for more details.
The information in this E-mail message is legally privileged and confidential
information intended only for the use of the individual(s) named above. If you,
the reader of this message, are not the intended recipient, you are hereby
notified that you should not further disseminate, distribute, or forward this
E-mail message. If you have received this E-mail in error, please notify the
sender and delete all copies of the message promptly. Thank you.

----------------------- Original Message -----------------------

From: Yiannis Magkiriadis <yiannis.m@...>
To: global_mapper@yahoogroups.com
Cc:
Date: Tue, 7 Feb 2012 14:18:07 +0000
Subject: [global_mapper] slope shader smooth gradient colour


Hi,

I use the slope shader a lot as it is easier to create "visual texture" in
a background and see the imperfections when I am analysing sea bed
information..

Now when I do it, although I set it on a gray scale, i.e. white at 0 deg
slope and black at 1 deg slope (pending on the terrain the 1 can be 10 15
or etc..) the data background is always blue

Can I change it into an actual grey scale? if I go to custom color and
choose something else, I loose all the tecture again. It would be easier to
explain if I can forward an image. If it is OK to do so, let me know.

It is not that important but the question was raised at the office and I
have been trying to change it albeit with 0deg sucess.

Thanks and Regards,
Yiannis

[Non-text portions of this message have been removed]

Mike,

many thanks, fast response and works like a charm as usual.

Kind Regards,
Yiannis



On Tue, Feb 7, 2012 at 3:49 PM, Mike Childs <gmsupport@...>wrote:

> Hello Yiannis,
>
> Can you check your water display settings on the Vertical Options tab of
> the Configuration dialog and make sure that is off?
>
> If you want to send an image use gmsupport@..., or actually
> I would suggest using the globalmapperforum.com web site for support as
> you can attach images there and it is better organized for support than the
> Yahoo group which is quite old.
>
> Thanks,
>
> Mike Childs
> Global Mapper Guru
> Blue Marble Geographics
>
> Parker, CO USA
> www.globalmapper.com
> Email: gmsupport@...
>
>
>
> Welcoming Global Mapper to our Product Line
> www.bluemarblegeo.com
> Contact Blue Marble at info@..., or call 800-616-2725/+1
> (207)582-6747 for more details.
> The information in this E-mail message is legally privileged and
> confidential information intended only for the use of the individual(s)
> named above. If you, the reader of this message, are not the intended
> recipient, you are hereby notified that you should not further disseminate,
> distribute, or forward this E-mail message. If you have received this
> E-mail in error, please notify the sender and delete all copies of the
> message promptly. Thank you.
>
> ----------------------- Original Message -----------------------
>
> From: Yiannis Magkiriadis <yiannis.m@...>
> To: global_mapper@yahoogroups.com
> Cc:
> Date: Tue, 7 Feb 2012 14:18:07 +0000
> Subject: [global_mapper] slope shader smooth gradient colour
>
>
> Hi,
>
> I use the slope shader a lot as it is easier to create "visual texture" in
> a background and see the imperfections when I am analysing sea bed
> information..
>
> Now when I do it, although I set it on a gray scale, i.e. white at 0 deg
> slope and black at 1 deg slope (pending on the terrain the 1 can be 10 15
> or etc..) the data background is always blue
>
> Can I change it into an actual grey scale? if I go to custom color and
> choose something else, I loose all the tecture again. It would be easier to
> explain if I can forward an image. If it is OK to do so, let me know.
>
> It is not that important but the question was raised at the office and I
> have been trying to change it albeit with 0deg sucess.
>
> Thanks and Regards,
> Yiannis
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>


[Non-text portions of this message have been removed]

Hi,

is there a way to measure an angle between two lines in GM without doing
the math after taking down the heading of those two lines?

Thanks for that.

Yiannis


[Non-text portions of this message have been removed]

Hello Yiannis,

No, there is not current a way to measure the angle between 2 lines in Global
Mapper.

Thanks,

Mike Childs
Global Mapper Guru
Blue Marble Geographics

Parker, CO USA
www.globalmapper.com
Email: gmsupport@...



Welcoming Global Mapper to our Product Line
www.bluemarblegeo.com
Contact Blue Marble at info@..., or call 800-616-2725/+1
(207)582-6747 for more details.
The information in this E-mail message is legally privileged and confidential
information intended only for the use of the individual(s) named above. If you,
the reader of this message, are not the intended recipient, you are hereby
notified that you should not further disseminate, distribute, or forward this
E-mail message. If you have received this E-mail in error, please notify the
sender and delete all copies of the message promptly. Thank you.

----------------------- Original Message -----------------------

From: Yiannis Magkiriadis <yiannis.m@...>
To: global_mapper@yahoogroups.com
Cc:
Date: Fri, 10 Feb 2012 11:01:15 +0000
Subject: [global_mapper] measuring angles


Hi,

is there a way to measure an angle between two lines in GM without doing
the math after taking down the heading of those two lines?

Thanks for that.

Yiannis

[Non-text portions of this message have been removed]

Hi,


Is it possible to have in a GM script:  'color is not green, or not red, or
not yellow'   (where color is an attribute)

Thanks,


[Non-text portions of this message have been removed]

Hello Danny,

Would you want this as part of a COMPARE_STR for an EDIT_VECTOR command or
something like that? There isn't currently a way to do that, but I could
probably add it.

Thanks,

Mike Childs
Global Mapper Guru
Blue Marble Geographics

Parker, CO USA
www.globalmapper.com
Email: gmsupport@...



Welcoming Global Mapper to our Product Line
www.bluemarblegeo.com
Contact Blue Marble at info@..., or call 800-616-2725/+1
(207)582-6747 for more details.
The information in this E-mail message is legally privileged and confidential
information intended only for the use of the individual(s) named above. If you,
the reader of this message, are not the intended recipient, you are hereby
notified that you should not further disseminate, distribute, or forward this
E-mail message. If you have received this E-mail in error, please notify the
sender and delete all copies of the message promptly. Thank you.

----------------------- Original Message -----------------------

From: "Danny Geysen" <danny.geysen@...>
To: <global_mapper@yahoogroups.com>
Cc:
Date: Sat, 11 Feb 2012 23:14:08 +0100
Subject: [global_mapper] GM scipt ' not equal to' or


Hi,


Is it possible to have in a GM script: 'color is not green, or not red, or
not yellow' (where color is an attribute)

Thanks,

[Non-text portions of this message have been removed]

Thank you Mike for this quick response, allthough it is weekend now ...

Yes, that is what I would like.

Remember, I have green buoys, red buoys, yellow buoys and all kind of
mixtures.
The only feature to select them is by color.
So I would like  'if color not equal to green, or not equal to red, or not
eaqual to yellow'  (so all the rest) to convert them all to one LMC_TYPE.

Danny





-----Oorspronkelijk bericht-----
Van: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
Namens Mike Childs
Verzonden: 12 February 2012 06:23
Aan: Danny Geysen
Onderwerp: re: [global_mapper] GM scipt ' not equal to' or

Hello Danny,

Would you want this as part of a COMPARE_STR for an EDIT_VECTOR command or
something like that? There isn't currently a way to do that, but I could
probably add it.

Thanks,

Mike Childs
Global Mapper Guru
Blue Marble Geographics

Parker, CO USA
www.globalmapper.com
Email: gmsupport@...



Welcoming Global Mapper to our Product Line www.bluemarblegeo.com Contact
Blue Marble at info@..., or call 800-616-2725/+1 (207)582-6747
for more details.
The information in this E-mail message is legally privileged and
confidential information intended only for the use of the individual(s)
named above. If you, the reader of this message, are not the intended
recipient, you are hereby notified that you should not further disseminate,
distribute, or forward this E-mail message. If you have received this E-mail
in error, please notify the sender and delete all copies of the message
promptly. Thank you.

----------------------- Original Message -----------------------

From: "Danny Geysen" <danny.geysen@...>
To: <global_mapper@yahoogroups.com>
Cc:
Date: Sat, 11 Feb 2012 23:14:08 +0100
Subject: [global_mapper] GM scipt ' not equal to' or


Hi,


Is it possible to have in a GM script: 'color is not green, or not red, or
not yellow' (where color is an attribute)

Thanks,

[Non-text portions of this message have been removed]






------------------------------------

Yahoo! Groups Links

Dear Mike,

Do we have a repository of all available GM script syntax?

Hello Salil,

See http://www.globalmapper.com/helpv13/ScriptReference.html for the current
scripting reference.

Thanks,

Mike Childs
Global Mapper Guru
Blue Marble Geographics

Parker, CO USA
www.globalmapper.com
Email: gmsupport@...



Welcoming Global Mapper to our Product Line
www.bluemarblegeo.com
Contact Blue Marble at info@..., or call 800-616-2725/+1
(207)582-6747 for more details.
The information in this E-mail message is legally privileged and confidential
information intended only for the use of the individual(s) named above. If you,
the reader of this message, are not the intended recipient, you are hereby
notified that you should not further disseminate, distribute, or forward this
E-mail message. If you have received this E-mail in error, please notify the
sender and delete all copies of the message promptly. Thank you.

----------------------- Original Message -----------------------

From: "Salil" <salil13d@...>
To: global_mapper@yahoogroups.com
Cc:
Date: Sun, 12 Feb 2012 18:08:36 -0000
Subject: [global_mapper] GM Script


Dear Mike,

Do we have a repository of all available GM script syntax?

Hello Danny,

For what you are describing wouldn't you want to have one equal for each type
assignment, like COMPARE_STR="COLOR=GREEN" for one EDIT_VECTOR command where you
do something for all green buoys?

Thanks,

Mike Childs
Global Mapper Guru
Blue Marble Geographics

Parker, CO USA
www.globalmapper.com
Email: gmsupport@...



Welcoming Global Mapper to our Product Line
www.bluemarblegeo.com
Contact Blue Marble at info@..., or call 800-616-2725/+1
(207)582-6747 for more details.
The information in this E-mail message is legally privileged and confidential
information intended only for the use of the individual(s) named above. If you,
the reader of this message, are not the intended recipient, you are hereby
notified that you should not further disseminate, distribute, or forward this
E-mail message. If you have received this E-mail in error, please notify the
sender and delete all copies of the message promptly. Thank you.

----------------------- Original Message -----------------------

From: "Danny Geysen" <danny.geysen@...>
To: <global_mapper@yahoogroups.com>
Cc:
Date: Sun, 12 Feb 2012 10:40:53 +0100
Subject: RE: [global_mapper] GM scipt ' not equal to' or



Thank you Mike for this quick response, allthough it is weekend now ...

Yes, that is what I would like.

Remember, I have green buoys, red buoys, yellow buoys and all kind of
mixtures.
The only feature to select them is by color.
So I would like 'if color not equal to green, or not equal to red, or not
eaqual to yellow' (so all the rest) to convert them all to one LMC_TYPE.

Danny

-----Oorspronkelijk bericht-----
Van: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
Namens Mike Childs
Verzonden: 12 February 2012 06:23
Aan: Danny Geysen
Onderwerp: re: [global_mapper] GM scipt ' not equal to' or

Hello Danny,

Would you want this as part of a COMPARE_STR for an EDIT_VECTOR command or
something like that? There isn't currently a way to do that, but I could
probably add it.

Thanks,

Mike Childs
Global Mapper Guru
Blue Marble Geographics

Parker, CO USA
www.globalmapper.com
Email: gmsupport@...

Welcoming Global Mapper to our Product Line www.bluemarblegeo.com Contact
Blue Marble at info@..., or call 800-616-2725/+1 (207)582-6747
for more details.
The information in this E-mail message is legally privileged and
confidential information intended only for the use of the individual(s)
named above. If you, the reader of this message, are not the intended
recipient, you are hereby notified that you should not further disseminate,
distribute, or forward this E-mail message. If you have received this E-mail
in error, please notify the sender and delete all copies of the message
promptly. Thank you.

----------------------- Original Message -----------------------

From: "Danny Geysen" <danny.geysen@...>
To: <global_mapper@yahoogroups.com>
Cc:
Date: Sat, 11 Feb 2012 23:14:08 +0100
Subject: [global_mapper] GM scipt ' not equal to' or

Hi,

Is it possible to have in a GM script: 'color is not green, or not red, or
not yellow' (where color is an attribute)

Thanks,

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links

I am confused with these term . Can any body explain what is difference and
definition (authenticated not Wikipedia brand) of "DEM" , "DTM" and "DSM".


Best regards and thanks in advance.

Saif

[Non-text portions of this message have been removed]

Mike,

Yes,  I use  EDIT_VECTOR COMPARE_STR="COLOR=GREEN"  for all the green buoys.
I do the he same for red. Same for yellow.
But then I have a number of buoys wich are red and green, green and red,
green white green, etc.. So all kind of combinations.
I would like to assign one  LMC_Type  for all this kind of combinations.
(Because the number of LMC_Type objects is very limited when exporting to
Lowrance LCM.)

I hope this is clear what I want to do ?

Danny





-----Oorspronkelijk bericht-----
Van: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
Namens Mike Childs
Verzonden: 12 February 2012 20:19
Aan: Danny Geysen
Onderwerp: re[2]: [global_mapper] GM scipt ' not equal to' or

Hello Danny,

For what you are describing wouldn't you want to have one equal for each
type assignment, like COMPARE_STR="COLOR=GREEN" for one EDIT_VECTOR command
where you do something for all green buoys?

Thanks,

Mike Childs
Global Mapper Guru
Blue Marble Geographics

Parker, CO USA
www.globalmapper.com
Email: gmsupport@...



Welcoming Global Mapper to our Product Line www.bluemarblegeo.com Contact
Blue Marble at info@..., or call 800-616-2725/+1 (207)582-6747
for more details.
The information in this E-mail message is legally privileged and
confidential information intended only for the use of the individual(s)
named above. If you, the reader of this message, are not the intended
recipient, you are hereby notified that you should not further disseminate,
distribute, or forward this E-mail message. If you have received this E-mail
in error, please notify the sender and delete all copies of the message
promptly. Thank you.

----------------------- Original Message -----------------------

From: "Danny Geysen" <danny.geysen@...>
To: <global_mapper@yahoogroups.com>
Cc:
Date: Sun, 12 Feb 2012 10:40:53 +0100
Subject: RE: [global_mapper] GM scipt ' not equal to' or



Thank you Mike for this quick response, allthough it is weekend now ...

Yes, that is what I would like.

Remember, I have green buoys, red buoys, yellow buoys and all kind of
mixtures.
The only feature to select them is by color.
So I would like 'if color not equal to green, or not equal to red, or not
eaqual to yellow' (so all the rest) to convert them all to one LMC_TYPE.

Danny

-----Oorspronkelijk bericht-----
Van: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
Namens Mike Childs
Verzonden: 12 February 2012 06:23
Aan: Danny Geysen
Onderwerp: re: [global_mapper] GM scipt ' not equal to' or

Hello Danny,

Would you want this as part of a COMPARE_STR for an EDIT_VECTOR command or
something like that? There isn't currently a way to do that, but I could
probably add it.

Thanks,

Mike Childs
Global Mapper Guru
Blue Marble Geographics

Parker, CO USA
www.globalmapper.com
Email: gmsupport@...

Welcoming Global Mapper to our Product Line www.bluemarblegeo.com Contact
Blue Marble at info@..., or call 800-616-2725/+1 (207)582-6747
for more details.
The information in this E-mail message is legally privileged and
confidential information intended only for the use of the individual(s)
named above. If you, the reader of this message, are not the intended
recipient, you are hereby notified that you should not further disseminate,
distribute, or forward this E-mail message. If you have received this E-mail
in error, please notify the sender and delete all copies of the message
promptly. Thank you.

----------------------- Original Message -----------------------

From: "Danny Geysen" <danny.geysen@...>
To: <global_mapper@yahoogroups.com>
Cc:
Date: Sat, 11 Feb 2012 23:14:08 +0100
Subject: [global_mapper] GM scipt ' not equal to' or

Hi,

Is it possible to have in a GM script: 'color is not green, or not red, or
not yellow' (where color is an attribute)

Thanks,

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links






------------------------------------

Yahoo! Groups Links

Hello Danny,

I went ahead and updated the COMPARE_STR attribute to take != as well as = as
now. I have placed a new build at
http://www.globalmapper.com/global_mapper13.zip with the change for you to try.
Simply download that file and extract the contents into your existing v13.xx
installation folder to give it a try. If you are using the 64-bit v13 version
there is a new build at http://www.globalmapper.com/global_mapper13_64bit.zip .

Let me know if I can be of further assistance.

Thanks,

Mike Childs
Global Mapper Guru
Blue Marble Geographics

Parker, CO USA
www.globalmapper.com
Email: gmsupport@...



Welcoming Global Mapper to our Product Line
www.bluemarblegeo.com
Contact Blue Marble at info@..., or call 800-616-2725/+1
(207)582-6747 for more details.
The information in this E-mail message is legally privileged and confidential
information intended only for the use of the individual(s) named above. If you,
the reader of this message, are not the intended recipient, you are hereby
notified that you should not further disseminate, distribute, or forward this
E-mail message. If you have received this E-mail in error, please notify the
sender and delete all copies of the message promptly. Thank you.

----------------------- Original Message -----------------------

From: "Danny Geysen" <danny.geysen@...>
To: <global_mapper@yahoogroups.com>
Cc:
Date: Sun, 12 Feb 2012 10:40:53 +0100
Subject: RE: [global_mapper] GM scipt ' not equal to' or



Thank you Mike for this quick response, allthough it is weekend now ...

Yes, that is what I would like.

Remember, I have green buoys, red buoys, yellow buoys and all kind of
mixtures.
The only feature to select them is by color.
So I would like 'if color not equal to green, or not equal to red, or not
eaqual to yellow' (so all the rest) to convert them all to one LMC_TYPE.

Danny

-----Oorspronkelijk bericht-----
Van: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
Namens Mike Childs
Verzonden: 12 February 2012 06:23
Aan: Danny Geysen
Onderwerp: re: [global_mapper] GM scipt ' not equal to' or

Hello Danny,

Would you want this as part of a COMPARE_STR for an EDIT_VECTOR command or
something like that? There isn't currently a way to do that, but I could
probably add it.

Thanks,

Mike Childs
Global Mapper Guru
Blue Marble Geographics

Parker, CO USA
www.globalmapper.com
Email: gmsupport@...

Welcoming Global Mapper to our Product Line www.bluemarblegeo.com Contact
Blue Marble at info@..., or call 800-616-2725/+1 (207)582-6747
for more details.
The information in this E-mail message is legally privileged and
confidential information intended only for the use of the individual(s)
named above. If you, the reader of this message, are not the intended
recipient, you are hereby notified that you should not further disseminate,
distribute, or forward this E-mail message. If you have received this E-mail
in error, please notify the sender and delete all copies of the message
promptly. Thank you.

----------------------- Original Message -----------------------

From: "Danny Geysen" <danny.geysen@...>
To: <global_mapper@yahoogroups.com>
Cc:
Date: Sat, 11 Feb 2012 23:14:08 +0100
Subject: [global_mapper] GM scipt ' not equal to' or

Hi,

Is it possible to have in a GM script: 'color is not green, or not red, or
not yellow' (where color is an attribute)

Thanks,

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links

Hello Saif,

See http://en.wikipedia.org/wiki/Digital_elevation_model for a detailed
explanation, but in short a DTM is the bare ground, DSM is the height of the
tallest solid object at any location (i.e. ground with buildings), and a DEM can
be for either, it's just a model of elevation values of any type.

Thanks,

Mike Childs
Global Mapper Guru
Blue Marble Geographics

Parker, CO USA
www.globalmapper.com
Email: gmsupport@...



Welcoming Global Mapper to our Product Line
www.bluemarblegeo.com
Contact Blue Marble at info@..., or call 800-616-2725/+1
(207)582-6747 for more details.
The information in this E-mail message is legally privileged and confidential
information intended only for the use of the individual(s) named above. If you,
the reader of this message, are not the intended recipient, you are hereby
notified that you should not further disseminate, distribute, or forward this
E-mail message. If you have received this E-mail in error, please notify the
sender and delete all copies of the message promptly. Thank you.

----------------------- Original Message -----------------------

From: Saif Khalid <gensaif@...>
To: Mike <global_mapper@yahoogroups.com>
Cc:
Date: Sun, 12 Feb 2012 11:21:29 -0800 (PST)
Subject: [global_mapper] DEM vs DTM vs DSM


I am confused with these term . Can any body explain what is difference and
definition (authenticated not Wikipedia brand) of "DEM" , "DTM" and "DSM".

Best regards and thanks in advance.

Saif

[Non-text portions of this message have been removed]

Thanks a lot Mike. 
Best Regards


________________________________
  From: Mike Childs <gmsupport@...>
To: Danny Geysen <global_mapper@yahoogroups.com>
Sent: Monday, 13 February 2012 8:04 AM
Subject: re: [global_mapper] DEM vs DTM vs DSM

Hello Saif,

See http://en.wikipedia.org/wiki/Digital_elevation_model for a detailed
explanation, but in short a DTM is the bare ground, DSM is the height of the
tallest solid object at any location (i.e. ground with buildings), and a DEM can
be for either, it's just a model of elevation values of any type.

Thanks,

Mike Childs
Global Mapper Guru
Blue Marble Geographics

Parker, CO USA
www.globalmapper.com
Email: gmsupport@...



Welcoming Global Mapper to our Product Line
www.bluemarblegeo.com
Contact Blue Marble at info@..., or call 800-616-2725/+1
(207)582-6747 for more details.
The information in this E-mail message is legally privileged and confidential
information intended only for the use of the individual(s) named above. If you,
the reader of this message, are not the intended recipient, you are hereby
notified that you should not further disseminate, distribute, or forward this
E-mail message. If you have received this E-mail in error, please notify the
sender and delete all copies of the message promptly. Thank you.

----------------------- Original Message -----------------------

From: Saif Khalid <gensaif@...>
To: Mike <global_mapper@yahoogroups.com>
Cc:
Date: Sun, 12 Feb 2012 11:21:29 -0800 (PST)
Subject: [global_mapper] DEM vs DTM vs DSM


I am confused with these term . Can any body explain what is difference and
definition (authenticated not Wikipedia brand) of "DEM" , "DTM" and "DSM".

Best regards and thanks in advance.

Saif

[Non-text portions of this message have been removed]






------------------------------------

Yahoo! Groups Links



[Non-text portions of this message have been removed]

Thank you Mike.  Just what I wanted.
It is working just fine.  The script is almost finished and doing exactly
what I wanted to have.

Danny Geysen


-----Oorspronkelijk bericht-----
Van: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
Namens Mike Childs
Verzonden: 13 February 2012 03:52
Aan: Danny Geysen
Onderwerp: re[2]: [global_mapper] GM scipt ' not equal to' or

Hello Danny,

I went ahead and updated the COMPARE_STR attribute to take != as well as =
as now. I have placed a new build at
http://www.globalmapper.com/global_mapper13.zip with the change for you to
try. Simply download that file and extract the contents into your existing
v13.xx installation folder to give it a try. If you are using the 64-bit v13
version there is a new build at
http://www.globalmapper.com/global_mapper13_64bit.zip .

Let me know if I can be of further assistance.

Thanks,

Mike Childs
Global Mapper Guru
Blue Marble Geographics

Parker, CO USA
www.globalmapper.com
Email: gmsupport@...



Welcoming Global Mapper to our Product Line www.bluemarblegeo.com Contact
Blue Marble at info@..., or call 800-616-2725/+1 (207)582-6747
for more details.
The information in this E-mail message is legally privileged and
confidential information intended only for the use of the individual(s)
named above. If you, the reader of this message, are not the intended
recipient, you are hereby notified that you should not further disseminate,
distribute, or forward this E-mail message. If you have received this E-mail
in error, please notify the sender and delete all copies of the message
promptly. Thank you.

----------------------- Original Message -----------------------

From: "Danny Geysen" <danny.geysen@...>
To: <global_mapper@yahoogroups.com>
Cc:
Date: Sun, 12 Feb 2012 10:40:53 +0100
Subject: RE: [global_mapper] GM scipt ' not equal to' or



Thank you Mike for this quick response, allthough it is weekend now ...

Yes, that is what I would like.

Remember, I have green buoys, red buoys, yellow buoys and all kind of
mixtures.
The only feature to select them is by color.
So I would like 'if color not equal to green, or not equal to red, or not
eaqual to yellow' (so all the rest) to convert them all to one LMC_TYPE.

Danny

-----Oorspronkelijk bericht-----
Van: global_mapper@yahoogroups.com [mailto:global_mapper@yahoogroups.com]
Namens Mike Childs
Verzonden: 12 February 2012 06:23
Aan: Danny Geysen
Onderwerp: re: [global_mapper] GM scipt ' not equal to' or

Hello Danny,

Would you want this as part of a COMPARE_STR for an EDIT_VECTOR command or
something like that? There isn't currently a way to do that, but I could
probably add it.

Thanks,

Mike Childs
Global Mapper Guru
Blue Marble Geographics

Parker, CO USA
www.globalmapper.com
Email: gmsupport@...

Welcoming Global Mapper to our Product Line www.bluemarblegeo.com Contact
Blue Marble at info@..., or call 800-616-2725/+1 (207)582-6747
for more details.
The information in this E-mail message is legally privileged and
confidential information intended only for the use of the individual(s)
named above. If you, the reader of this message, are not the intended
recipient, you are hereby notified that you should not further disseminate,
distribute, or forward this E-mail message. If you have received this E-mail
in error, please notify the sender and delete all copies of the message
promptly. Thank you.

----------------------- Original Message -----------------------

From: "Danny Geysen" <danny.geysen@...>
To: <global_mapper@yahoogroups.com>
Cc:
Date: Sat, 11 Feb 2012 23:14:08 +0100
Subject: [global_mapper] GM scipt ' not equal to' or

Hi,

Is it possible to have in a GM script: 'color is not green, or not red, or
not yellow' (where color is an attribute)

Thanks,

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links






------------------------------------

Yahoo! Groups Links

Hi All
  I'm trying to layer a raster image on top of a mrsid. the other is a tiff. I
used the mrsid as a reference when I geo-rectified the tiff.But they don't quite
line up. What did I do wrong? Do number of pixels or zoom levels have any
bearing on this? Thanks for any advice. FYI I'm using GM 13

I downloaded data from
http://tigerweb.geo.census.gov/arcgis/services/tigerWMS/MapServer/WMSServer and
the text labels are perfectly readable on the screen, but when I print it out
the text is so small you can't even read it with a magnifying glass.  Is there a
setting somewhere that will cause it to print out larger?  I have run into this
problem with almost all of the downloaded sources with text.

Hello trytoofish,

How far were you zoomed in on the SID when you chose the control points? If you
were zoomed way out then you might be a bit off from where you were trying to
select. Make sure you are zoomed pretty far in on both images. Also check your
rectification method on the Options menu of the rectification dialog and make
sure it is set to Automatic so the best method will automatically be chosen.

Let me know if I can be of further assistance.

Thanks,

Mike Childs
Global Mapper Guru
Blue Marble Geographics

Parker, CO USA
www.globalmapper.com
Email: gmsupport@...



Welcoming Global Mapper to our Product Line
www.bluemarblegeo.com
Contact Blue Marble at info@..., or call 800-616-2725/+1
(207)582-6747 for more details.
The information in this E-mail message is legally privileged and confidential
information intended only for the use of the individual(s) named above. If you,
the reader of this message, are not the intended recipient, you are hereby
notified that you should not further disseminate, distribute, or forward this
E-mail message. If you have received this E-mail in error, please notify the
sender and delete all copies of the message promptly. Thank you.

----------------------- Original Message -----------------------

From: "trytoofish" <redangus@...>
To: global_mapper@yahoogroups.com
Cc:
Date: Wed, 15 Feb 2012 11:56:54 -0000
Subject: [global_mapper] rectifying raster layers


Hi All
I'm trying to layer a raster image on top of a mrsid. the other is a tiff. I
used the mrsid as a reference when I geo-rectified the tiff.But they don't quite
line up. What did I do wrong? Do number of pixels or zoom levels have any
bearing on this? Thanks for any advice. FYI I'm using GM 13

I was zoomed in alot. I will check the the auto option

--- In global_mapper@yahoogroups.com, Mike Childs <gmsupport@...> wrote:
>
> Hello trytoofish,
>
> How far were you zoomed in on the SID when you chose the control points? If
you were zoomed way out then you might be a bit off from where you were trying
to select. Make sure you are zoomed pretty far in on both images. Also check
your rectification method on the Options menu of the rectification dialog and
make sure it is set to Automatic so the best method will automatically be
chosen.
>
> Let me know if I can be of further assistance.
>
> Thanks,
>
> Mike Childs
> Global Mapper Guru
> Blue Marble Geographics
>
> Parker, CO USA
> www.globalmapper.com
> Email: gmsupport@...
>
>
>
> Welcoming Global Mapper to our Product Line
> www.bluemarblegeo.com
> Contact Blue Marble at info@..., or call 800-616-2725/+1 (207)582-6747 for
more details.
> The information in this E-mail message is legally privileged and confidential
information intended only for the use of the individual(s) named above. If you,
the reader of this message, are not the intended recipient, you are hereby
notified that you should not further disseminate, distribute, or forward this
E-mail message. If you have received this E-mail in error, please notify the
sender and delete all copies of the message promptly. Thank you.
>
> ----------------------- Original Message -----------------------
>
> From: "trytoofish" <redangus@...>
> To: global_mapper@yahoogroups.com
> Cc:
> Date: Wed, 15 Feb 2012 11:56:54 -0000
> Subject: [global_mapper] rectifying raster layers
>
>
> Hi All
> I'm trying to layer a raster image on top of a mrsid. the other is a tiff. I
used the mrsid as a reference when I geo-rectified the tiff.But they don't quite
line up. What did I do wrong? Do number of pixels or zoom levels have any
bearing on this? Thanks for any advice. FYI I'm using GM 13
>

auto was the selected option. enen if the mrsid geo data was off the tiff should
still align with the mrsid- correct.

--- In global_mapper@yahoogroups.com, Mike Childs <gmsupport@...> wrote:
>
> Hello trytoofish,
>
> How far were you zoomed in on the SID when you chose the control points? If
you were zoomed way out then you might be a bit off from where you were trying
to select. Make sure you are zoomed pretty far in on both images. Also check
your rectification method on the Options menu of the rectification dialog and
make sure it is set to Automatic so the best method will automatically be
chosen.
>
> Let me know if I can be of further assistance.
>
> Thanks,
>
> Mike Childs
> Global Mapper Guru
> Blue Marble Geographics
>
> Parker, CO USA
> www.globalmapper.com
> Email: gmsupport@...
>
>
>
> Welcoming Global Mapper to our Product Line
> www.bluemarblegeo.com
> Contact Blue Marble at info@..., or call 800-616-2725/+1 (207)582-6747 for
more details.
> The information in this E-mail message is legally privileged and confidential
information intended only for the use of the individual(s) named above. If you,
the reader of this message, are not the intended recipient, you are hereby
notified that you should not further disseminate, distribute, or forward this
E-mail message. If you have received this E-mail in error, please notify the
sender and delete all copies of the message promptly. Thank you.
>
> ----------------------- Original Message -----------------------
>
> From: "trytoofish" <redangus@...>
> To: global_mapper@yahoogroups.com
> Cc:
> Date: Wed, 15 Feb 2012 11:56:54 -0000
> Subject: [global_mapper] rectifying raster layers
>
>
> Hi All
> I'm trying to layer a raster image on top of a mrsid. the other is a tiff. I
used the mrsid as a reference when I geo-rectified the tiff.But they don't quite
line up. What did I do wrong? Do number of pixels or zoom levels have any
bearing on this? Thanks for any advice. FYI I'm using GM 13
>

I also would like to know how you can change the zoom level of the referenced
image when you are rectifying. it seems like the zoom level of the referenced
image is set in the GM window before you enter the rectify window.

--- In global_mapper@yahoogroups.com, "trytoofish" <redangus@...> wrote:
>
> auto was the selected option. enen if the mrsid geo data was off the tiff
should still align with the mrsid- correct.
>
> --- In global_mapper@yahoogroups.com, Mike Childs <gmsupport@> wrote:
> >
> > Hello trytoofish,
> >
> > How far were you zoomed in on the SID when you chose the control points? If
you were zoomed way out then you might be a bit off from where you were trying
to select. Make sure you are zoomed pretty far in on both images. Also check
your rectification method on the Options menu of the rectification dialog and
make sure it is set to Automatic so the best method will automatically be
chosen.
> >
> > Let me know if I can be of further assistance.
> >
> > Thanks,
> >
> > Mike Childs
> > Global Mapper Guru
> > Blue Marble Geographics
> >
> > Parker, CO USA
> > www.globalmapper.com
> > Email: gmsupport@
> >
> >
> >
> > Welcoming Global Mapper to our Product Line
> > www.bluemarblegeo.com
> > Contact Blue Marble at info@, or call 800-616-2725/+1 (207)582-6747 for more
details.
> > The information in this E-mail message is legally privileged and
confidential information intended only for the use of the individual(s) named
above. If you, the reader of this message, are not the intended recipient, you
are hereby notified that you should not further disseminate, distribute, or
forward this E-mail message. If you have received this E-mail in error, please
notify the sender and delete all copies of the message promptly. Thank you.
> >
> > ----------------------- Original Message -----------------------
> >
> > From: "trytoofish" <redangus@>
> > To: global_mapper@yahoogroups.com
> > Cc:
> > Date: Wed, 15 Feb 2012 11:56:54 -0000
> > Subject: [global_mapper] rectifying raster layers
> >
> >
> > Hi All
> > I'm trying to layer a raster image on top of a mrsid. the other is a tiff. I
used the mrsid as a reference when I geo-rectified the tiff.But they don't quite
line up. What did I do wrong? Do number of pixels or zoom levels have any
bearing on this? Thanks for any advice. FYI I'm using GM 13
> >
>

Hello trytoofish,

Yes, if Automatic was selected at least your control points should match up
between the 2? Is the image off at the control points or just somewhere else in
the image? How many control points did you provide and how are they arranged in
the image? Typically you will want 4 or 5 control points. The rectification
should be tied exactly at the control points that you provide. Also what version
of Global Mapper are you using?

Thanks,

Mike Childs
Global Mapper Guru
Blue Marble Geographics

Parker, CO USA
www.globalmapper.com
Email: gmsupport@...



Welcoming Global Mapper to our Product Line
www.bluemarblegeo.com
Contact Blue Marble at info@..., or call 800-616-2725/+1
(207)582-6747 for more details.
The information in this E-mail message is legally privileged and confidential
information intended only for the use of the individual(s) named above. If you,
the reader of this message, are not the intended recipient, you are hereby
notified that you should not further disseminate, distribute, or forward this
E-mail message. If you have received this E-mail in error, please notify the
sender and delete all copies of the message promptly. Thank you.

----------------------- Original Message -----------------------

From: "trytoofish" <redangus@...>
To: global_mapper@yahoogroups.com
Cc:
Date: Wed, 15 Feb 2012 16:19:22 -0000
Subject: [global_mapper] Re: rectifying raster layers


auto was the selected option. enen if the mrsid geo data was off the tiff should
still align with the mrsid- correct.

--- In global_mapper@yahoogroups.com, Mike Childs <gmsupport@...> wrote:
>
> Hello trytoofish,
>
> How far were you zoomed in on the SID when you chose the control points? If
you were zoomed way out then you might be a bit off from where you were trying
to select. Make sure you are zoomed pretty far in on both images. Also check
your rectification method on the Options menu of the rectification dialog and
make sure it is set to Automatic so the best method will automatically be
chosen.
>
> Let me know if I can be of further assistance.
>
> Thanks,
>
> Mike Childs
> Global Mapper Guru
> Blue Marble Geographics
>
> Parker, CO USA
> www.globalmapper.com
> Email: gmsupport@...
>
>
>
> Welcoming Global Mapper to our Product Line
> www.bluemarblegeo.com
> Contact Blue Marble at info@..., or call 800-616-2725/+1 (207)582-6747 for
more details.
> The information in this E-mail message is legally privileged and confidential
information intended only for the use of the individual(s) named above. If you,
the reader of this message, are not the intended recipient, you are hereby
notified that you should not further disseminate, distribute, or forward this
E-mail message. If you have received this E-mail in error, please notify the
sender and delete all copies of the message promptly. Thank you.
>
> ----------------------- Original Message -----------------------
>
> From: "trytoofish" <redangus@...>
> To: global_mapper@yahoogroups.com
> Cc:
> Date: Wed, 15 Feb 2012 11:56:54 -0000
> Subject: [global_mapper] rectifying raster layers
>
>
> Hi All
> I'm trying to layer a raster image on top of a mrsid. the other is a tiff. I
used the mrsid as a reference when I geo-rectified the tiff.But they don't quite
line up. What did I do wrong? Do number of pixels or zoom levels have any
bearing on this? Thanks for any advice. FYI I'm using GM 13
>

Hello Jack,

For a WMS source the result is a raster image from the server. The size will
really depend on the resolution used for the export. If you do a lower
resolution export than the default then the text should be correspondingly
bigger as each pixel is larger in the output. If you do a high resolution output
the text will be a much smaller ground distance, otherwise you would end up with
just a big blob of text for high resolution exports if the text was still a
large portion of the resulting image. So basically try using a lower resolution
for your export. Because the text is rendered on the server based on the
resolution that you choose there isn't any kind of font setting to change the
text. Or of course for a high resolution export you can simply zoom in on the
resulting image to see more detail and make the text larger.

Thanks,

Mike Childs
Global Mapper Guru
Blue Marble Geographics

Parker, CO USA
www.globalmapper.com
Email: gmsupport@...



Welcoming Global Mapper to our Product Line
www.bluemarblegeo.com
Contact Blue Marble at info@..., or call 800-616-2725/+1
(207)582-6747 for more details.
The information in this E-mail message is legally privileged and confidential
information intended only for the use of the individual(s) named above. If you,
the reader of this message, are not the intended recipient, you are hereby
notified that you should not further disseminate, distribute, or forward this
E-mail message. If you have received this E-mail in error, please notify the
sender and delete all copies of the message promptly. Thank you.

----------------------- Original Message -----------------------

From: "Jack" <needhamsurveyors@...>
To: global_mapper@yahoogroups.com
Cc:
Date: Wed, 15 Feb 2012 15:48:49 -0000
Subject: [global_mapper] Text Size on Print Out of Downloaded WMS Data


I downloaded data from
http://tigerweb.geo.census.gov/arcgis/services/tigerWMS/MapServer/WMSServer and
the text labels are perfectly readable on the screen, but when I print it out
the text is so small you can't even read it with a magnifying glass. Is there a
setting somewhere that will cause it to print out larger? I have run into this
problem with almost all of the downloaded sources with text.

Hello trytoofish,

You can zoom in with the mouse in the reference view. Just drag a box with the
left mouse button down to zoom in and right-click to zoom out.

Let me know if I can be of further assistance.

Thanks,

Mike Childs
Global Mapper Guru
Blue Marble Geographics

Parker, CO USA
www.globalmapper.com
Email: gmsupport@...



Welcoming Global Mapper to our Product Line
www.bluemarblegeo.com
Contact Blue Marble at info@..., or call 800-616-2725/+1
(207)582-6747 for more details.
The information in this E-mail message is legally privileged and confidential
information intended only for the use of the individual(s) named above. If you,
the reader of this message, are not the intended recipient, you are hereby
notified that you should not further disseminate, distribute, or forward this
E-mail message. If you have received this E-mail in error, please notify the
sender and delete all copies of the message promptly. Thank you.

----------------------- Original Message -----------------------

From: "trytoofish" <redangus@...>
To: global_mapper@yahoogroups.com
Cc:
Date: Wed, 15 Feb 2012 16:30:52 -0000
Subject: [global_mapper] Re: rectifying raster layers


I also would like to know how you can change the zoom level of the referenced
image when you are rectifying. it seems like the zoom level of the referenced
image is set in the GM window before you enter the rectify window.

--- In global_mapper@yahoogroups.com, "trytoofish" <redangus@...> wrote:
>
> auto was the selected option. enen if the mrsid geo data was off the tiff
should still align with the mrsid- correct.
>
> --- In global_mapper@yahoogroups.com, Mike Childs <gmsupport@> wrote:
> >
> > Hello trytoofish,
> >
> > How far were you zoomed in on the SID when you chose the control points? If
you were zoomed way out then you might be a bit off from where you were trying
to select. Make sure you are zoomed pretty far in on both images. Also check
your rectification method on the Options menu of the rectification dialog and
make sure it is set to Automatic so the best method will automatically be
chosen.
> >
> > Let me know if I can be of further assistance.
> >
> > Thanks,
> >
> > Mike Childs
> > Global Mapper Guru
> > Blue Marble Geographics
> >
> > Parker, CO USA
> > www.globalmapper.com
> > Email: gmsupport@
> >
> >
> >
> > Welcoming Global Mapper to our Product Line
> > www.bluemarblegeo.com
> > Contact Blue Marble at info@, or call 800-616-2725/+1 (207)582-6747 for more
details.
> > The information in this E-mail message is legally privileged and
confidential information intended only for the use of the individual(s) named
above. If you, the reader of this message, are not the intended recipient, you
are hereby notified that you should not further disseminate, distribute, or
forward this E-mail message. If you have received this E-mail in error, please
notify the sender and delete all copies of the message promptly. Thank you.
> >
> > ----------------------- Original Message -----------------------
> >
> > From: "trytoofish" <redangus@>
> > To: global_mapper@yahoogroups.com
> > Cc:
> > Date: Wed, 15 Feb 2012 11:56:54 -0000
> > Subject: [global_mapper] rectifying raster layers
> >
> >
> > Hi All
> > I'm trying to layer a raster image on top of a mrsid. the other is a tiff. I
used the mrsid as a reference when I geo-rectified the tiff.But they don't quite
line up. What did I do wrong? Do number of pixels or zoom levels have any
bearing on this? Thanks for any advice. FYI I'm using GM 13
> >
>

Thanks Mike. I only had 3 control points. I will try re rectifying with more
points.

--- In global_mapper@yahoogroups.com, Mike Childs <gmsupport@...> wrote:
>
> Hello trytoofish,
>
> You can zoom in with the mouse in the reference view. Just drag a box with the
left mouse button down to zoom in and right-click to zoom out.
>
> Let me know if I can be of further assistance.
>
> Thanks,
>
> Mike Childs
> Global Mapper Guru
> Blue Marble Geographics
>
> Parker, CO USA
> www.globalmapper.com
> Email: gmsupport@...
>
>
>
> Welcoming Global Mapper to our Product Line
> www.bluemarblegeo.com
> Contact Blue Marble at info@..., or call 800-616-2725/+1 (207)582-6747 for
more details.
> The information in this E-mail message is legally privileged and confidential
information intended only for the use of the individual(s) named above. If you,
the reader of this message, are not the intended recipient, you are hereby
notified that you should not further disseminate, distribute, or forward this
E-mail message. If you have received this E-mail in error, please notify the
sender and delete all copies of the message promptly. Thank you.
>
> ----------------------- Original Message -----------------------
>
> From: "trytoofish" <redangus@...>
> To: global_mapper@yahoogroups.com
> Cc:
> Date: Wed, 15 Feb 2012 16:30:52 -0000
> Subject: [global_mapper] Re: rectifying raster layers
>
>
> I also would like to know how you can change the zoom level of the referenced
image when you are rectifying. it seems like the zoom level of the referenced
image is set in the GM window before you enter the rectify window.
>
> --- In global_mapper@yahoogroups.com, "trytoofish" <redangus@> wrote:
> >
> > auto was the selected option. enen if the mrsid geo data was off the tiff
should still align with the mrsid- correct.
> >
> > --- In global_mapper@yahoogroups.com, Mike Childs <gmsupport@> wrote:
> > >
> > > Hello trytoofish,
> > >
> > > How far were you zoomed in on the SID when you chose the control points?
If you were zoomed way out then you might be a bit off from where you were
trying to select. Make sure you are zoomed pretty far in on both images. Also
check your rectification method on the Options menu of the rectification dialog
and make sure it is set to Automatic so the best method will automatically be
chosen.
> > >
> > > Let me know if I can be of further assistance.
> > >
> > > Thanks,
> > >
> > > Mike Childs
> > > Global Mapper Guru
> > > Blue Marble Geographics
> > >
> > > Parker, CO USA
> > > www.globalmapper.com
> > > Email: gmsupport@
> > >
> > >
> > >
> > > Welcoming Global Mapper to our Product Line
> > > www.bluemarblegeo.com
> > > Contact Blue Marble at info@, or call 800-616-2725/+1 (207)582-6747 for
more details.
> > > The information in this E-mail message is legally privileged and
confidential information intended only for the use of the individual(s) named
above. If you, the reader of this message, are not the intended recipient, you
are hereby notified that you should not further disseminate, distribute, or
forward this E-mail message. If you have received this E-mail in error, please
notify the sender and delete all copies of the message promptly. Thank you.
> > >
> > > ----------------------- Original Message -----------------------
> > >
> > > From: "trytoofish" <redangus@>
> > > To: global_mapper@yahoogroups.com
> > > Cc:
> > > Date: Wed, 15 Feb 2012 11:56:54 -0000
> > > Subject: [global_mapper] rectifying raster layers
> > >
> > >
> > > Hi All
> > > I'm trying to layer a raster image on top of a mrsid. the other is a tiff.
I used the mrsid as a reference when I geo-rectified the tiff.But they don't
quite line up. What did I do wrong? Do number of pixels or zoom levels have any
bearing on this? Thanks for any advice. FYI I'm using GM 13
> > >
> >
>

Hi There,

I have been trying to export elevation data and doing the contours for Aster
GDEM download using GM 12 with unsuccessful attempts. The process stales at ~2%
for the Block Long 23.9 to 27, Lat -10.8 to -13.5. I have tried Arc ASCII and
Geosoft Grid formats, both failed.
Interestingly, I downloaded elevation data and did contouring for adjacent
blocks with no problem at all.

can anyone advise me on this issue?

Thank you and kind regards,
Ida

Hello Ida,

The server that the ASTER GDEM data comes off of is notoriously unreliable, but
you might get better results by moving to a newer v12 build. I have placed a new
build at http://www.globalmapper.com/global_mapper12.zip with the change for you
to try. Simply download that file and extract the contents into your existing
v12.xx installation folder to give it a try. If you are using the 64-bit v12
version there is a new build at
http://www.globalmapper.com/global_mapper12_64bit.zip .

Moving to v13 will almost definitely make things better too if you want to
upgrade.

Let me know if I can be of further assistance.

Thanks,

Mike Childs
Global Mapper Guru
Blue Marble Geographics

Parker, CO USA
www.globalmapper.com
Email: gmsupport@...



Welcoming Global Mapper to our Product Line
www.bluemarblegeo.com
Contact Blue Marble at info@..., or call 800-616-2725/+1
(207)582-6747 for more details.
The information in this E-mail message is legally privileged and confidential
information intended only for the use of the individual(s) named above. If you,
the reader of this message, are not the intended recipient, you are hereby
notified that you should not further disseminate, distribute, or forward this
E-mail message. If you have received this E-mail in error, please notify the
sender and delete all copies of the message promptly. Thank you.

----------------------- Original Message -----------------------

From: "Ida Litaay" <newlitaay@...>
To: global_mapper@yahoogroups.com
Cc:
Date: Thu, 16 Feb 2012 12:17:51 -0000
Subject: [global_mapper] Exporting DEM and Contouring Failed


Hi There,

I have been trying to export elevation data and doing the contours for Aster
GDEM download using GM 12 with unsuccessful attempts. The process stales at ~2%
for the Block Long 23.9 to 27, Lat -10.8 to -13.5. I have tried Arc ASCII and
Geosoft Grid formats, both failed.
Interestingly, I downloaded elevation data and did contouring for adjacent
blocks with no problem at all.

can anyone advise me on this issue?

Thank you and kind regards,
Ida

Thank you Mike,
I have updated GM12 with the new build that you gave and could download the
block, however the results has stripes of missing data and it took me half day
to complete the download. I will put the screen shots on the yahoogroup "File"
folder. I have 512kbps internet connection here but it worked fine with the
other blocks:(

Any other advice?

thanking you
Ida


--- In global_mapper@yahoogroups.com, Mike Childs <gmsupport@...> wrote:
>
> Hello Ida,
>
> The server that the ASTER GDEM data comes off of is notoriously unreliable,
but you might get better results by moving to a newer v12 build. I have placed a
new build at http://www.globalmapper.com/global_mapper12.zip with the change for
you to try. Simply download that file and extract the contents into your
existing v12.xx installation folder to give it a try. If you are using the
64-bit v12 version there is a new build at
http://www.globalmapper.com/global_mapper12_64bit.zip .
>
> Moving to v13 will almost definitely make things better too if you want to
upgrade.
>
> Let me know if I can be of further assistance.
>
> Thanks,
>
> Mike Childs
> Global Mapper Guru
> Blue Marble Geographics
>
> Parker, CO USA
> www.globalmapper.com
> Email: gmsupport@...
>
>
>
> Welcoming Global Mapper to our Product Line
> www.bluemarblegeo.com
> Contact Blue Marble at info@..., or call 800-616-2725/+1 (207)582-6747 for
more details.
> The information in this E-mail message is legally privileged and confidential
information intended only for the use of the individual(s) named above. If you,
the reader of this message, are not the intended recipient, you are hereby
notified that you should not further disseminate, distribute, or forward this
E-mail message. If you have received this E-mail in error, please notify the
sender and delete all copies of the message promptly. Thank you.
>
> ----------------------- Original Message -----------------------
>
> From: "Ida Litaay" <newlitaay@...>
> To: global_mapper@yahoogroups.com
> Cc:
> Date: Thu, 16 Feb 2012 12:17:51 -0000
> Subject: [global_mapper] Exporting DEM and Contouring Failed
>
>
> Hi There,
>
> I have been trying to export elevation data and doing the contours for Aster
GDEM download using GM 12 with unsuccessful attempts. The process stales at ~2%
for the Block Long 23.9 to 27, Lat -10.8 to -13.5. I have tried Arc ASCII and
Geosoft Grid formats, both failed.
> Interestingly, I downloaded elevation data and did contouring for adjacent
blocks with no problem at all.
>
> can anyone advise me on this issue?
>
> Thank you and kind regards,
> Ida
>