Hi, welcome to this group. I suggest using the Handy Board, it has much better support than the 6270 board....
77
hktptong@...
Oct 9, 2001 2:39 pm
hi, I used Freeware Interactive 2.81 before...now I want to change into 3.1 version..does anyone have the register key? Can you give an e-mail to me? thanks ...
78
Brice D. Hornback
bdh@...
Oct 11, 2001 5:08 am
You have to purchase the software. It's not free. ... From: hktptong@... To: handyboard@yahoogroups.com Sent: Tuesday, October 09, 2001 9:35 AM ...
79
Brice D. Hornback
bdh@...
Oct 11, 2001 5:09 am
Check out: http://www.cyberbound.com and look at the CYBER2 Robot. - Brice ... From: hktptong@... To: handyboard@yahoogroups.com Sent: Sunday,...
I finaly finished my speach/servo expansion board. You can see a schematic of it at http://www.1sorc.com/spchschm.gif I hope to be able to offer these for...
Hey guys. I've just finished building the Interface/Charger Serial Circuit. In testing, when I shorted pin 6 of the MAX232 to J9-pin7 (ground), i get the...
I'm not sure exactly why you need to go through all that, the RS232 is just for translating the signal from your computer to the handyboard, it doesn't have...
Yeah, I just ignored the error, but now I have another problem... I posted on the lugnet group, but to no avail. I've gotten to the point where I can boostrap,...
I saw your post there, just didn't have the time to deal with all it takes to post a reply at that board. Did you build the Handy board? If so check your...
Alright, I've checked the orientation of the resistors, and it's still a no go:( Like, the LCD is not overtly bright, it just has nothing to say... Could it be...
Man, i really want this to work =) I've found that, when I turn the HB on, and press start a few times, then all the top bar LCD blocks get dark black, and...
OK, so you are really not even sure that the board is taking the pcode then .. right? So, are you using the windows version HBDL.EXE, or the dos version DL.EXE...
Sorry, I wasn't online. GRR. I should have been! (it's 9:33AM EST) And, i'm using Interactive C to load the pccode. I'm now running into problems that...
I will try to be there. I think it is probably something simple. Faster computers do cause some problems, the HB was designed around slower machines of the...
Ok, so just shoot me an e-mail as soon as your avail! I'm actually going to have to leave for an hour (I"m going to tutor somebody, but I'll be back ASAP!...
Ah, yes Win2k is not supported. I recomend finding a slower machine with win 98 or lower. I'm still not sure about the LCD. There could be something else going...
Ok, I took your advice on the slower machine, and it worked! YES! Now, hoever, I have a *few* problems. When I built the digital input circuit, a few didn't...
Does anyone here us the Expansion board that was designed for the Handyboard?? If so have you successfully used it? I need to see some code to try and figure...
We are trying to use four of the GP2D12 sensors and have cut the trace to the pullup resistor for analog port zero to allow use with the expansion board. This...
... trace to the pullup resistor for analog port zero to allow use with the expansion board. This has lead to another problem in that we can no longer get a...
I think it might be to your advantage to get the Interactive C program from Newton labs, you could use it just to make a few tests and comparisons. IC is...
I was just wondering if anyone could tell me how to lower the high reference voltage for the A/D converter to allow for better resolution. Thanks Adam...
Hello, I don't remember the exact pin on 68HC11A1. However, there is a pin to set the high reference voltage on ADC. Handyboard ties this pin to +ve (5V) by...
After checking the schematic, it is pin 52 (Vrh). ... From: huip@... To: handyboard@yahoogroups.com Sent: Thursday, November 08, 2001 9:34 AM Subject:...
