The guide does recommend one other adapter (Netgear FA120) but there are other compatible adapters available. I had mentioned this shortcoming quite some time...
... I've never tried to use a wireless bridge myself, but others have reported having problems using off-the-shelf bridges with the TiVo. I suggested that...
I need some help. I recently built hacked HR10-250 system with a WD3200 320 MB disk as the primary drive and a WD2500 250 MB disk as the secondary drive....
I'm far from an expert at this but did you expand your swap space? You have 570g of space so I believe your swap space should be 285m so use the -s 285 command...
I have seen some postings recently asking about wireless bridges for use with their Tivo's. I have set mine up with a Netgear 802.11g Wireless Ethernet Bridge...
It's more basic than that... the drive is not writable in the TiVo or a PC... and reads very very slowly. Since I've had such little feedback from the Tivo...
Where did you get the backup image from that you installed on the 320MB drive? If it was taken from a different HDTivo then you'll need to perform a Clear &...
Thanks for the info, Brian. My father got a second HD Tivo two weeks ago, and he was asking me about a wireless network connection to his two PC's. He...
You said: "Before I could get the entire system working" What does that mean. We're you ever able to use it for normal TiVo operations with the new 2-disk...
Yes - just connect your adapter into the tivo as you would for any wired connection, and plug your ethernet cable from the FA120 into the WGE101. Assuming you...
Brian, you mentioned that you have a hub between the TiVo and the bridge. When you say hub, do mean a "dumb" hub, i.e. broadcasts packets to all connected...
What type of speeds are you guys seeing when moving files from the TiVo to a computer using TyTools? I am running TyTools9r17 with musclenerds tserver and...
... http://groups.yahoo.com/group/hdtivo/message/2259 I can see up to 2.5mB/s if I wire up, usually 1.5-2.0mB/s depending on wireless speed otherwise. Normally...
I get 3.0 MB/s with my Netgear FA-120 over a wired connection with both tuners tuned to channels I don't receive using the "tweaked" network drivers and...
I built the system from the latest "InstantCake" CD for the HR10-250, kernel is off the PTVUpgrade 4.01 ISO.... currently built with the 320MB drive as primary...
I haven't installed the backported drivers on my HDTivos yet but I have installed them on numerous S2 SD DTivos (I just don't do much extraction from the...
Hello! Do check the website of the week by visiting http://newwebsitepick.info . The website also says how you can nomiate your website if you have one. ...
I followed the HOW-TO from this group and, with some slight modifications, it worked great. Now I have a friend that wants me to do the same to his SD unit....
It is a "dumb" hub. It's actually an old hub that only allows 10Mb/sec. I think I've also had this setup without the hub (before I got an XBox and PS2...
Yes and no. You'd need to run killhdinitrd on a different kernel and some of the processes may differ slightly but overall they're quite similar. I'd...
Yeah, I'm not worried about external drives so I plan on skipping that. That mfs_* tools has been move to sourceforge - FYI (you probably knew that, though). ...
pre-release 3 is the best you can do now as far as I'm aware. You have to put pieces together to get it: http://groups.yahoo.com/group/hdtivo/message/1736 ......
Look in the files section of this group. About a year ago I hacked my 2 SD Directivos and wrote a mini how-to for SD units. Good luck. Jay _____ From:...
Turn off the double socket option in tytool and your speeds will double instantly to 3 from 1.6. ... speed ... files. ... version ... fixes ... should ... the ...
I have my TiVo running version 1.2.1 of TivoWebPlus. I see that there is a great deal I can do using the web interface, but I was under the impression it would...
... I haven't updated from 1.1-pre1 yet but I can't imagine it's changed much - any time you are looking at a page representing an "episode/show"(as opposed to...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
