Hi all, I have purchased a Zinwell 6802 6x8 Multiswitch. I have three directivos. (1 sdtivo 2 tuner, 2 hdtivo 2 tuner) I have connected my two sdtivo with the...
Which dish do you have? If the Tivo can see the 119 sat when you connect directly to the dish and not with the multiswitch in between, my first inclination...
Captain, Thanks for the info. Well guess what the fix was. I knew the Zinwell was operating properly because the other two HDTIVOs were fine. I ran the clear...
From: "Chris Weiss" <chris.weiss@...> ... Of course it will - it comes with a 250 GB drive from the factory and many people are using 1 or 2 250, 300,...
The HR10-250 OS uses an LBA48 aware kernel so it doesn't need a patch. As you've already read, the HR10-250 comes stock with a 250GB drive so it already...
For whatever reason, I lot my /var/hack directory. I can still connect through telnet and tivoweb still works, but the tivo ftp server is gone. I'm also unable...
... Zmodem is about the only way, although I've had limited success. I think you'd better pull the drive. And this is a great time to remind folks that...
Zmodem transfers only work if you're connected via serial cable. Make sure you change the filesystem to read/write prior to performing any transfers or they...
Hi, I thought I would document something here that might help someone else in a similar situation who has the resources to do it. I had a bad HDMI card in my...
One further comment. I noticed that the new replacement board has had the connector on the main board as well as the HDMI board completely redesigned. I...
You could have simply run the 51killer.tcl script and rebooted to play your old recordings since I'm assuming encryption had already been diabled. You...
You could of just swapped the HDMI board from the new unit into the old unit in under 5 min with a screw driver and sent back the new unit with the bad HDMI...
Hi All, So yesterday I upgrade to 6.3a from 3.1.7f, using Tivo-6.3_Upgrade.rtf. Although my previous rc.sysinit.author worked fine with 3.1.7f (excerpt here), ...
Two problems were present. (1) I had never got around to disabling encryption. (2) The other is the new HDMI circuit board in the replacement unit had a new...
The only thing I see that sticks out in my mind is that you placed the netconfig.tcl file in the /var directory, which is not at all recommended since the /var...
OK, I've had some power issues around here due to the weather lately, and I don't see much freezing right now. The unit had uptimes of 30+ days before and was...
I just looked at MFS and found a Christmas present from DTV. 6.3a-01-2-357 tyDb 1328771 09/25/06 12:04 796 6.3b-01-2-357 tyDb 1667800 12/12/06 02:36 772 ACTIVE...
OK, so I tried to upgrade to 3.2b by launching the installsw this morning, everything looked OK, copied my hacks to the new partition, copied the kernel, and...
Time for some Instant Cake I would say! ... From: Peter Clark To: hdtivo@yahoogroups.com Sent: Thursday, December 14, 2006 7:55 AM Subject: [hdtivo] <sigh> OK,...
... Odds are something went wrong when you tried to put the 3.1.5 kernel on. Can you list the steps you took, exactly, to install the 3.1.5 kernel? --chris...
After much hair pulling and a spell away from the box to regroup and get some real work done, turns out it's more like time to make sure you un-gzip the...
OK, so after the fiasco yesterday I finally managed to get back to picture running 6.3a with the hacked kernel. Cool. So, this morning I reboot the machine...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
