... and ... established ... They ... is ... bad ... no ... Is this to say that I can just install the Insteon switches & modules without buying the Insteon...
Yes, you should be able to just buy the modules and they will work. I don't know if they have changed them much, but it used to be that easy. Maybe someone can...
The Insteon devices are very easy to use with X-10. Since they have no switch-wheels to set an X-10 address, you have to use other means to program them. The...
I had Heyu-2.0Beta.2 up on an old system so when I built a new one I didn't expect a problem in getting a new version set up. The new system is running CentOS...
On Sun, 06 May 2007 14:31:29 -0600 ... Dan, I don't know much about it, but understand that Xen is like an open-source VMware. At installation, Heyu asks about...
Hi Charles - Permissions do seem to be different - [root@trailrunner mail]# ls -l /dev/ttyUSB0 crw-rw---- 1 root root 188, 0 May 6 14:19 /dev/ttyUSB0 You have...
Hi all, Recently I bought a starterskit from Marmitek, including the following modules: CM11G LM12G (2 times) LM15ES TM13 AM12 Up till now I've only used the...
Hi, I've setup heyu and am able to control a CM11A unit to send out signals successfully - no problems there. I've also been able to upload timer/macro ...
... timer/macro ... when the ... In addition to that I would like to monitor all X10 events, not initiated by the CM11 unit, but for instance by Remote...
On Sun, 06 May 2007 16:25:24 -0600 ... Dan, It looks like your kernel is in the range 2.6.18 to 2.6.19 affected by the Keyspan driver bug. Here's the...
Just an FYI.. I bought a SABRENT USB to Serial db9 Male RS-232 (9-pin) Converter Model SBT-USC1M and it works fine with the pl2303 driver under Fedora Core 6....
On Mon, 07 May 2007 14:42:33 +1000 ... Open a second terminal window and run 'heyu monitor'. This will show X10 signals sent and received by the CM11A. If...
Oh joy - this entire build has been one amazing frustration over another - samba didn't work, sendmail is being a bit snippy and now this. Truly it's not...
On Mon, 07 May 2007 09:18:45 -0400 ... That's one of the adapters I evaluated which fails the RI line test. See the topic "USB-to-Serial adapters for Heyu"...
On Mon, 07 May 2007 10:32:41 -0400 ... I just updated my FC-6 system to the latest kernel (2.6.20-1.2948.fc6) and retested my Sabrent SBT-USC1M using...
I just ordered the ByteRunner USB-COM-CBL with FTDI brand chipset for $18 and change. Hopefully in a few days it will arive and the lights will go on and off...
Xen is a virtual machine scheme. It uses a hypervisor to let you run multiple OSes as virtual machines. I'ev not played with it a lot, since XEN crashes on my...
... Pardon my ignorance.. What is an RI line test? I'm running 2.0beta9 but I only send commands to the CM11 from the Linux host. Perhaps it's not working ...
On Mon, 07 May 2007 09:02:33 -0600 ... Dan, ByteRunner is a dealer who sells a number of different USB->Serial adapters. (http://www.byterunner.com). ...
On Mon, 07 May 2007 14:44:41 -0400 ... The CM11 asserts the serial port Ring Indicator status line for a few hundred milliseconds immediately before it reports...
... I'm still having serial port problems here Charles, but I can get around them. Usually... First, I bought some FTDI based usb-serial adapters to replace my...
Gene Heskett
gene.heskett@...
May 8, 2007 1:35 am
1737
... I can't make a prolific work with a Belkin either, but the FTDI seems to be ok. -- Cheers, Gene "There are four boxes to be used in defense of liberty: ...
Gene Heskett
gene.heskett@...
May 8, 2007 1:37 am
1738
Gene, The heyu_users forum doesn't accept attachments to messages, but you can upload the patch to the heyu_users Files area. (Reference your message ID in the...
Hi Charles - et al. I am thrilled to report that the new USB to Serial converter from ByteRunner, specifically the USB-COM-CBL unit works beautifully. Simply...
On Wed, 09 May 2007 17:48:47 -0600 ... Are you talking about the Status of device displayed by 'heyu info' or the status of the RI serial line? ... The...
The command <heyu info> returns quite a bit of information, including a summary of device status. Based upon the below cut and paste capture of the results...
On Thu, 10 May 2007 11:11:02 -0600 ... Dan, You have the base housecode of the CM11A set to 'O' (Oh). The CM11A records the states only of units on its base...
Hi all, Have been using heyu for some time now, and starting to use the script capabilities of it, so that I can query a database instead of always executing...
Andy, You need to specify the source(s) of the X10 signals that are allowed to launch your scripts. The default source is RCVI for signals received over the...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
