I have 2 x prolific USB > Serial interfaces on Centos 5. Every time I boot the PC it seems random as to which USB adapter will end up on which device (USB0 or...
On Mon, 01 Jun 2009 21:26:50 -0000 ... Chris, Here are the contents of my file "/etc/udev/rules.d/10-local.rules" (which I created, thanks to a post here by...
Hello I put the folowing line on the x10.conf file : ALIAS Porte_cle A13 KEYCHAIN TRANSCEIVE 0xFA06 --> Unknown RF option parameter what's wrong ? There is...
On Tue, 02 Jun 2009 07:36:28 -0000 ... Geo, The KEYCHAIN module type is for a Standard X10 remote, not a Security X10 remote. It doesn't take an ID parameter...
Chris, I am running 2 x FTDI (for 2x CM11a) on my NSLU2 with Debian, as well as 2x Pertelian X2040 (4-line LCD displays - also FTDI). I use an external USB hub...
Hello the ALIAS name a1 MS12 TRANSCEIVE ---> don't work the ALIAS name a1 MS13 TRANSCEIVE ---> work ... I have a old MS12E, so is there a diffrence between...
On Wed, 03 Jun 2009 08:39:29 -0000 ... Oops, that's an error in man page x10config(5). The module types are MS12A, MS13, MS13A, MS14A, and MS16A. They're all...
... Thanks Bob and Charles, I think I can use these tips to distinguish, they are by different vendors and can see a clear difference from lsusb and...
... My problem now is that you got me interested in the NSLU2.... Sounds like a very viable option to replace my noisy old PC. Is it really up to the job /...
hello there is another possibility, that I will try : installing HEYU into a Linksys NAS200, which have a simple i486 processor ... The trick is that you can...
On Fri, 05 Jun 2009 00:11:33 -0000 ... The CM11A is operated by data bytes being transferred back and forth via the TX and RX data lines (and optionally the RI...
Thanks for the reply! Thats too bad it doesn't work with the firecracker. I just ordered a W800RF32A... is it safe to assume that my el-cheapo usb-to-serial...
Since I am planning on using a CM11a, CM17a and a W800RF32A all at the same time, I will need two serial ports. Unfortunately, I have a newer motherboard with...
I had the same problem with not enough ports for my cm11a, 17a,and w800. I found a serial port pci card with two ports was far cheaper than more complex...
hello on ebay, I bought recently an FDTI usb cable ... try to search on ebay.com the following pattern : "USB to Serial Adapter RS232 DB9 FTDI PALM GPS" ...
Don't forget that many motherboards do still have a com port, but it does not appear on the back panel, and you have to connect a cable to the motherboard....
... Does this USB-Serial adapter support the serial status lines? Or just the data lines? ... Dear customer, Thank you for your support. :) This adapter is...
You have resolved your issue (or at least found its cause) but I thought I'd contribute one thought - this is what has happened to me a couple times now, as I...
Hello, I have the following scripts configured in Heyu: SCRIPT Puerta_Entrada alert night rcva :: /usr/local/bin/heyu on Lampara_Entrada SCRIPT Puerta_Entrada...
... Why not check the value of X10_isNightTime and X10_Armed from within the script and have it executed regardless of time of day? If it's night time, turn...
On Sat, 6 Jun 2009 17:27:18 +0200 ... Fco, If this is what you want: If alert received at night and system is not armed, turn on the light. If alert received...
Thanks Tom. Charles, your combination works correctly for me. The problem was in the "notarmed" condition. Thanks Regards. Fco. 2009/6/6 Charles Sullivan...
-- Sent from my Palm Pre Charles Sullivan wrote: On Sat, 6 Jun 2009 17:27:18 +0200 ... Fco, If this is what you want: If alert received at night and system is...
Fco, BTW, note that the flag "notarmed" includes the states either "disarmed" OR "armpending". Depending on what you want, you might prefer to use "disarmed"...
Ok, notarmed is perfect for me. Thanks again Regards Fco. 2009/6/7 Charles Sullivan <cwsulliv01@...> ... [Non-text portions of this message have been...