hi for all the group i need help pls= i made an 4 chanel out combiner for fm use by 75ohm ptfe cables with 4 pcs 100ohm resistive for 4 modules 250watt and i...
hi for fm use 87,, to 108 , i have used the wilkinson combiner 0 out of phase, same length for each cables ptfe thanks samir ... From: ArtekMedia To:...
Yes, the FG209M2 is a direct replacement. Works for 7061's also. I don't remember how much they cost, but they were surprisingly affordable from Noritake....
If I did the math right what you need five 1/4 wave sections of 112 ohm coax (which doesn't exist as far as I know). you could layout 1/4 wave strip lines...
dave ,thanks for yr info so much do you think i can test the combiner as reverse on my network analizer ? i mean as splitter for 5 output =the output of...
You can make Wilkinson type combiner/divider for any number of inputs: http://www.microwaves101.com/encyclopedia/wilkinson_nway.cfm Didier KO4BB ... From:...
Flame shield up: I've always preferred Tek scopes. Very briefly, I'd go for a 7000 series, like a 7704A, 7904A or a 7633 if you want analog storage. Stay away...
To the defense of Agilent i have to say that they still have "a few good men" its just hard to find them nowadays, i had one sending me a PAL for free after...
i worked on 2711 and 12 before and they are not good to work on, the series was conceived as low cost analyzers and thats how its build, another thing is that...
thats a interesting question and i have honestly never seen anyone asking it before, most of the time when it comes to combining uneven numbers people just use...
the 8558B was a nice analyzer especially with the 853A which has IEEE and direct plot capability, older 8558B tend to drift quite a bit after turn on so you...
Hi Lothar, Any luck with the Rohde & Schawrz/Tektronix CMD80 Communication Tester Service Manual. Thank You Sal C. Cornacchia Electronic RF Microwave Engineer...
Actually (odd number) N way splitters are used a lot (or were used a lot ....not that much call for it anymore) in LF, MF & HF antenna arrays. 3 & 4 Antenna...
hi i made several combiner wilkinson input and output but i was use 2 ,4, 6 and eight input and all with 75 ohm ptfe rg 179b ,and the out rg302 sure with 100...
For those who are interested: the 8530A antenna test system is indeed a semi-major mode of the 8510. You have to drill a hole in the back panel for the...
Mark Kahrs
mark.kahrs@...
Apr 1, 2009 5:05 pm
19553
Official answer from Agilent: Hello Lothar, The PAL did change at every major firmware revision (for instance between 6.x and 7.x). Sincerely, ...
Good morning to all, I would like to know if you could recommend me any data generator unit that is an upgraded version of HP8180A/002. I'm having a hard time...
Yeah, they let him back out in the field. I went through a period like that when they first started doing the remote call center support (O.J. is in the DC...
Hi.. Hearing that.. what are the differences of the 8530's to the 8510's? I thought of actually getting one of these. I'm assuming they can still be had.....
I got a whole box of Narda Switches from a scrapped Test system, i have SPDT, SP3T, SP4T , SP6T with SMA Connectors rated to 18GHz the series is SEM1XXLD ,all...
The 8530A is basically a 8510C with some added features, the most significant hw change is that the 8530 has a additional control connector on the back which...
Ok.. that's interesting. I guess the best thing would be to upgrade the 8510 to the 8530.. What about the 8590? Greg Bowne >>> The information contained...
I'm a bit of a nerd when it comes to small details like "when was the BNC introduced". Of course google is almost worse than useless - every hit on the first ...
HP141T modification - PSU capacitor bank. Â I bought a second 141T mainframe 13 or so years ago for spares and fixed it up, but it never stored. Â The...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
